All Sensors Corporation. (2016). Understanding accuracy and precision for MEMS pressure sensors. Retrieved May 30, 2017, from https://www.allsensors.com/engineering-resources/white-papers/accuracy-and-precision-for-mems-pressure-sensors
Anderson, T., Ren, F., Pearton, S., Kang, B. S., Wang, H.-T., Chang, C.-Y., & Lin, J. (2009). Advances in hydrogen, carbon dioxide, and hydrocarbon gas sensor technology using GaN and ZnO-based devices. Sensors, 9(6), 4669-4694.
Andryakov, Y., Anikina, A., Belyaev, Y., Belogurov, A., Kostygov, D., & Puzankov, D. (2016). ASIC and MEMS co-design methodology. Paper presented at the 2016 IEEE NW Russia Young Researchers in Electrical and Electronic Engineering Conference (EIConRusNW).
Arzt, E. (1998). Size effects in materials due to microstructural and dimensional constraints: a comparative review. Acta materialia, 46(16), 5611-5626.
Ashton, K. (2009). That ‘internet of things’ thing. RFiD Journal, 22(7), 97-114.
Assefa, G., & Frostell, B. (2007). Social sustainability and social acceptance in technology assessment: A case study of energy technologies. Technology in Society, 29(1), 63-78.
Bali, S. (2009). Linear Integrated Circuits: Tata McGraw Hill.
Bandarian, R. (2007). Evaluation of commercial potential of a new technology at the early stage of development with fuzzy logic. Journal of Technology Management & Innovation, 2(4), 73-85.
Banta, D. (2009). What is technology assessment? International Journal of Technology Assessment in Health Care, 25(S1), 7-9.
Banuls, V. A., & Salmeron, J. L. (2007). A scenario-based assessment model—SBAM. Technological Forecasting and Social Change, 74(6), 750-762.
Bimber, B. A. (1996). The politics of expertise in Congress: The rise and fall of the Office of Technology Assessment. Albany, NY: SUNY Press.
Bogner, A., Littig, B., & Menz, W. (2009). Introduction: Expert interviews—An introduction to a new methodological debate Interviewing experts (pp. 1-13): Springer.
Bottani, E., & Rizzi, A. (2006). A fuzzy TOPSIS methodology to support outsourcing of logistics services. Supply Chain Management: An International Journal, 11(4), 294-308.
Boyce, C., & Neale, P. (2006). Conducting in-depth interviews: A guide for designing and conducting in-depth interviews for evaluation input. Watertown, MA: Pathfinder International.
Brooks, K. W. (1979). Delphi technique: Expanding applications. North Central Association Quarterly, 53(3), 377-385.
Buckley, J. J. (1985). Fuzzy hierarchical analysis. Fuzzy sets and Systems, 17(3), 233-247.
Burger, N., & Staake, T. (2010). From micro to nanosystems: an exploratory study of influences on innovation teams. International Journal of Business and Economic Sciences, 2, 286-297.
Carpentier, J., Cathelin, A., Tilhac, C., Garcia, P., Persechini, P., Conti, P., . . . Belot, D. (2005). A SiGe: C BiCMOS WCDMA zero-IF RF front-end using an above-IC BAW filter. Paper presented at the ISSCC. 2005 IEEE International Digest of Technical Papers. Solid-State Circuits Conference, 2005.
Chaghooshi, A. J., Fathi, M. R., & Kashef, M. (2012). Integration of fuzzy Shannon’s entropy with fuzzy TOPSIS for industrial robotic system section. Journal of Industrial Engineering and Management, 5(1), 102-114.
Chen, T., Kelly, T., Collins, D., Berthold, B., Brosnihan, T., Denison, T., . . . Bain, D. (2005). The next generation integrated MEMS and CMOS process on SOI wafers for overdamped accelerometers. Paper presented at the Solid-State Sensors, Actuators and Microsystems, 2005. Digest of Technical Papers. TRANSDUCERS'05. The 13th International Conference on.
Chipworks. (2007). InvenSense IDG-300 dual-axis angular rate gyroscope sensor, Revision 2.0. Retrieved January 22, 2017, from http://www.chipworks.com/TOC/InvenSense_IDG-300_Dual_Axis_ARGS_MPR-0702-801_TOC.pdf
Chowdhury, S., & Roy, B. C. (2016). Rating micro finance institutions operating in India: an application of fuzzy analytical hierarchical process (FAHP). Economic Affairs, 61(1), 107.
Coates, J. F. (2001). A 21st century agenda for technology assessment. Technological Forecasting and Social Change, 67(2), 303-308.
Collins, M., & Williams, L. (2014). A three-stage filter for effective technology selection. Research-Technology Management, 57(3), 36-42.
Csutora, R., & Buckley, J. J. (2001). Fuzzy hierarchical analysis: The Lambda-Max method. Fuzzy sets and Systems, 120(2), 181-195.
Daim, T. U. (2011). Technology assessment: forecasting future adoption of emerging technologies. Berlin: Erich Schmidt Verlag GmbH & Co KG.
Dalkey, N., & Helmer, O. (1963). An experimental application of the Delphi method to the use of experts. Management science, 9(3), 458-467.
Dalkey, N. C., Brown, B. B., & Cochran, S. (1969). The Delphi method: An experimental study of group opinion (Vol. 3): Rand Corporation Santa Monica, CA.
Das, D., & Saha, A. (2016). Analytical hierarchy process based supplier selection methodology: a framework and application. International Journal of Reliability and Safety, 10(2), 125-144.
Davis, W. R., Wilson, J., Mick, S., Xu, J., Hua, H., Mineo, C., . . . Franzon, P. D. (2005). Demystifying 3D ICs: the pros and cons of going vertical. IEEE Design & Test of Computers, 22(6), 498-510.
Demirtaş, N., Özgürler, Ş., Özgürler, M., & Güneri, A. F. (2014). Selecting e-purse smart card technology via fuzzy AHP and ANP. Journal of Applied Mathematics, 2014.
Doody, O., & Noonan, M. (2013). Preparing and conducting interviews to collect data. Nurse Researcher, 20(5), 28-32.
Dussauge, P., Hart, S., & Ramanantsoa, B. (1992). Strategic technology management. New York, NY: Wiley.
Dutreuil, S. L. R., André, X., Woerther, P., Quemener, L., & Renaud, C. D. 3.1–Technology Readiness Level Report.
Emmanuel, S. O., & Peter, O. D. (2013). Impact assessment of MEMS application on automobile driveability and functionality. Paper presented at the Proceedings of the World Congress on Engineering.
Esashi, M. (2008). Wafer level packaging of MEMS. Journal of Micromechanics and Microengineering, 18(7), 073001.
Esashi, M., & Tanaka, S. (2013). Heterogeneous integration by adhesive bonding. Micro and Nano Systems Letters, 1(1), 1.
Fan, Z.-P., Suo, W.-L., & Feng, B. (2012). Identifying risk factors of IT outsourcing using interdependent information: An extended DEMATEL method. Expert systems with Applications, 39(3), 3832-3840.
Farooq, S., & O'Brien, C. (2012). A technology selection framework for integrating manufacturing within a supply chain. International Journal of Production Research, 50(11), 2987-3010.
Fedder, G. K. (2005). CMOS-based sensors. Paper presented at the Sensors, 2005 IEEE.
Fedder, G. K., Howe, R. T., Liu, T.-J. K., & Quevy, E. P. (2008). Technologies for cofabricating MEMS and electronics. Proceedings of the IEEE, 96(2), 306-322.
Fedder, G. K., Santhanam, S., Reed, M. L., Eagle, S. C., Guillou, D. F., Lu, M.-C., & Carley, L. R. (1996). Laminated high-aspect-ratio microstructures in a conventional CMOS process. Sensors and Actuators A: Physical, 57(2), 103-110.
Fischer, A. C., Forsberg, F., Lapisa, M., Bleiker, S. J., Stemme, G., Roxhed, N., & Niklaus, F. (2015). Integrating MEMS and ICs. Microsystems & Nanoengineering, 1, 15005. doi: 10.1038/micronano.2015.5
Flatscher, M., Dielacher, M., Herndl, T., Lentsch, T., Matischek, R., Prainsack, J., . . . Weber, W. (2010). A bulk acoustic wave (BAW) based transceiver for an in-tire-pressure monitoring sensor node. IEEE Journal of Solid-State Circuits, 45(1), 167-177.
Fraux, R. (2013). System Plus Consulting. mCube Monolithic 3-Axis Accelerometer - Reverse Costing Analysis. Retrieved January 22, 2017, from http://www.systemplus.fr/wp-content/uploads/2013/11/S+C_RM140_mCube_3-Axis_Accelerometer_Sample1.pdf
French, P., & Sarro, P. (2012). Integrated MEMS: opportunities & challenges.
Gabus, A., & Fontela, E. (1972). World problems, an invitation to further thought within the framework of DEMATEL. Battelle Geneva Research Center, Geneva, Switzerland.
Gao, D.-H., Qin, M., Chen, H.-Y., & Huang, Q.-A. (2004). A self-packaged thermal flow sensor by CMOS MEMS technology. Paper presented at the Sensors, 2004. Proceedings of IEEE.
Gaura, E., & Newman, R. (2006). Smart MEMS and sensor systems: World Scientific.
Geisler, E. (2002). The metrics of technology evaluation: Where we stand and where we should go from here. International Journal of Technology Management, 24(4), 341-374.
Geng, H. (2017). Internet of Things and Data Analytics Handbook: John Wiley & Sons.
Ghodssi, R., & Lin, P. (2011). MEMS materials and processes handbook (Vol. 1): Springer Science & Business Media.
Gregory, M. (1995). Technology management: A process approach. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 209(5), 347-356.
Gubbi, J., Buyya, R., Marusic, S., & Palaniswami, M. (2013). Internet of Things (IoT): A vision, architectural elements, and future directions. Future Generation Computer Systems, 29(7), 1645-1660.
Hartmann, M. H. (1999). Theory and practice of technological corporate assessment. International Journal of Technology Management, 17(5), 504-521.
Henriksen, A. D. P. (1997). A technology assessment primer for management of technology. International Journal of Technology Management, 13(5-6), 615-638.
Holmes, C., & Ferrill, M. (2005). The application of operation and technology roadmapping to aid Singaporean SMEs identify and select emerging technologies. Technological Forecasting and Social Change, 72(3), 349-357.
Hsieh, T.-Y., Lu, S.-T., & Tzeng, G.-H. (2004). Fuzzy MCDM approach for planning and design tenders selection in public office buildings. International Journal of Project Management, 22(7), 573-584.
Hu, S.-K., Lu, M.-T., & Tzeng, G.-H. (2014). Exploring smart phone improvements based on a hybrid MCDM model. Expert systems with Applications, 41(9), 4401-4413.
Huang, C.-Y., Shyu, J. Z., & Tzeng, G.-H. (2007). Reconfiguring the innovation policy portfolios for Taiwan's SIP Mall industry. Technovation, 27(12), 744-765.
Huang, C.-Y., Tzeng, G. H., Chen, Y. T., & Chen, H. (2012). Performance evaluation of leading fabless integrated circuit design houses by using a multiple objective programming based data envelopment analysis approach. International Journal of Innovative Computing, Information and Control, 8(8), 5899-5916.
Huang, J.-J., Tzeng, G.-H., & Ong, C.-S. (2005). Multidimensional data in multidimensional scaling using the analytic network process. Pattern Recognition Letters, 26(6), 755-767.
Hung, C.-Y., & Lee, W.-Y. (2016). A proactive technology selection model for new technology: The case of 3D IC TSV. Technological Forecasting and Social Change, 103, 191-202.
Hwang, B.-N., Huang, C.-Y., & Wu, C.-H. (2016). A TOE approach to establish a green supply chain adoption decision model in the semiconductor industry. Sustainability, 8(2), 168.
Hwang, B.-N., Huang, C.-Y., & Yang, C.-L. (2016). Determinants and their causal relationships affecting the adoption of cloud computing in science and technology institutions. Innovation, 18(2), 164-190.
Hwang, C. L., & Yoon, K. (1981). Multiple attribute decision making: Methods and applications. Berlin: Springer-Verlag.
Ilangkumaran, M., Sasirekha, V., Anojkumar, L., Sakthivel, G., Raja, M. B., Raj, T. R. S., . . . Kumar, S. P. (2013). Optimization of wastewater treatment technology selection using hybrid MCDM. Management of Environmental Quality: An International Journal, 24(5), 619-641.
Jones, J., & Hunter, D. (1995). Consensus methods for medical and health services research. BMJ: British Medical Journal, 311(7001), 376.
Jones, S. W. (2012). Introduction to integrated circuit technology (5th ed.): ICKnowlegde LLC.
Joshi, D. (2012). Analyzing competitive priorities for machine tool manufacturing industry: ANP based approach. Paper presented at the 2nd International Conference on Soft Computing for Problem Solving (SocProS '12), Jaipur, Rajasthan, India.
Kabak, M., & Dağdeviren, M. (2014). Prioritization of renewable energy sources for Turkey by using a hybrid MCDM methodology. Energy Conversion and Management, 79, 25-33.
Kahraman, C. (2007). Fuzzy Applications in Industrial Engineering: Springer Berlin Heidelberg.
Khatri, J., & Srivastava, M. (2016). Technology selection for sustainable supply chains. International Journal of Technology Management & Sustainable Development, 15(3), 275-289.
Khoshnoud, F., & de Silva, C. W. (2012). Recent advances in MEMS sensor technology–biomedical applications. IEEE Instrumentation & Measurement Magazine, 15(1), 8-14.
Kishore, P., & Padmanabhan, G. (2016). An Integrated Approach of Fuzzy AHP and Fuzzy TOPSIS to Select Logistics Service Provider. Journal for Manufacturing Science and Production, 16(1), 51-59.
Klocke, F., Arntz, K., & Heeschen, D. (2014). Decision-making process in manufacturing technology planning for small scale productions. Paper presented at the 47th Annual Hawaii International Conference on System Sciences (HICSS-47), Hawaii, USA.
Kuan, M., & Chen, Y. (2014). A hybrid MCDM framework combined with DEMATEL-based ANP to evaluate enterprise technological innovation capabilities assessment. Decision Science Letters, 3(4), 491-502.
Kumar, A., & Dash, M. K. (2015). Fuzzy Optimization and Multi-Criteria Decision Making in Digital Marketing: IGI Global.
Kumru, M., & Kumru, P. Y. (2014). A fuzzy ANP model for the selection of 3D coordinate-measuring machine. Journal of Intelligent Manufacturing, 1-12.
Lalinský, T., Držík, M., Jakovenko, J., Vanko, G., Mozolová, Ž., Haščík, Š., . . . Kostič, I. (2008). GaAs based micromachined thermal converter for gas sensors. Sensors and Actuators A: Physical, 142(1), 147-152.
Lamb, M., & Gregory, M. (1997). Industrial concerns in technology selection. Paper presented at the Portland International Conference on Management and Technology (PICMET '97), Portland, OR, USA.
Lee, I., & Lee, K. (2015). The Internet of Things (IoT): Applications, investments, and challenges for enterprises. Business Horizons, 58(4), 431-440.
Lee, S. H., Chen, K.-N., & Lu, J. J.-Q. (2011). Wafer-to-wafer alignment for three-dimensional integration: a review. Journal of Microelectromechanical systems, 20(4), 885-898.
Lee, S. K., Mogi, G., & Hui, K. S. (2013). A fuzzy analytic hierarchy process (AHP)/data envelopment analysis (DEA) hybrid model for efficiently allocating energy R&D resources: In the case of energy technologies against high oil prices. Renewable and Sustainable Energy Reviews, 21, 347-355.
Lee, Y.-C., & Chou, C. J. (2016). Technology Evaluation and Selection of 3DIC Integration Using a Three-Stage Fuzzy MCDM. Sustainability, 8(2), 114.
Lee, Y.-S., Huang, J.-C., & Hsu, Y.-S. (2008). Using modified delphi method to explore the competition strategy for software companies of Taiwan. Journal of Informatics & Electronics, 13(1), 39-50.
Lee, Y., Huang, J., & Hsu, Y. (2008). Using modified delphi method to explore the competition strategy for software companies of Taiwan. Journal of Informatics & Electronics, 13(1), 39-50.
Lemkin, M., Juneau, T., Clark, W., Roessig, T., & Brosnihan, T. (1999). A low-noise digital accelerometer using integrated SOI-MEMS technology. Tech. Digest, Transducers, 99, 1294-1297.
Lendaris, G. G. (1980). Structural modeling a tutorial guide. IEEE Transactions on systems, man, and cybernetics, 10(12), 807-840.
Leondes, C. T. (2007). Mems/Nems: (1) Handbook Techniques and Applications Design Methods, (2) Fabrication Techniques, (3) Manufacturing Methods, (4) Sensors and Actuators, (5) Medical Applications and MOEMS: Springer US.
Li, M.-H., Chen, C.-Y., Chen, W.-C., & Li, S.-S. (2015). A vertically coupled MEMS resonator pair for oscillator applications. Journal of Microelectromechanical systems, 24(3), 528-530.
Li, S., Da Xu, L., & Zhao, S. (2015). The internet of things: a survey. Information Systems Frontiers, 17(2), 243-259.
Linstone, H. A., & Turoff, M. (1975). The Delphi method: Techniques and applications (Vol. 29): Addison-Wesley Reading, MA.
Liu, C.-H., Tzeng, G.-H., & Lee, M.-H. (2012). Improving tourism policy implementation–The use of hybrid MCDM models. Tourism Management, 33(2), 413-426.
Liu, C., Chou, B. C., Tsai, R. C.-F., Shen, N. Y., Chen, B. S., Cheng, E. C., . . . Lin, C.-H. (2011). MEMS technology development and manufacturing in a CMOS foundry. Paper presented at the 2011 16th International Solid-State Sensors, Actuators and Microsystems Conference.
Liu, H.-C., Ren, M.-L., Wu, J., & Lin, Q.-L. (2014). An interval 2-tuple linguistic MCDM method for robot evaluation and selection. International Journal of Production Research, 52(10), 2867-2880.
Liu, H.-C., You, J.-X., Lu, C., & Chen, Y.-Z. (2015). Evaluating health-care waste treatment technologies using a hybrid multi-criteria decision making model. Renewable and Sustainable Energy Reviews, 41, 932-942.
Lutz, M., Partridge, A., Gupta, P., Buchan, N., Klaassen, E., McDonald, J., & Petersen, K. (2007). MEMS oscillators for high volume commercial applications. Paper presented at the Solid-State Sensors, Actuators and Microsystems Conference, 2007. TRANSDUCERS 2007. International.
Mahalik, N. P. (2008). Mems: Tata McGraw-Hill Education.
Maloney, J. D. (1982). How companies assess technology. Technological Forecasting and Social Change, 22(3), 321-329.
Mankins, J. C. (1995). Technology readiness levels. White Paper, April, 6.
Marek, J., Hoefflinger, B., & Gomez, U.-M. (2016). MEMS—Micro-Electromechanical Sensors for the Internet of Everything CHIPS 2020 VOL. 2 (pp. 221-229): Springer.
Marshall, C., & Rossman, G. B. (2011). Designing qualitative research: Sage.
Maxim, A. (2014). Sustainability assessment of electricity generation technologies using weighted multi-criteria decision analysis. Energy Policy, 65, 284-297.
Mohan, A., Malshe, A. P., Sriram, B., Natarajan, K., & Mohan, S. (2007). Multi Chip Module (MCM) design for packaging of a MEMS pressure sensor. Paper presented at the Polytronic 2007-6th International Conference on Polymers and Adhesives in Microelectronics and Photonics.
Murphy, D. F., Ray, M., Wyles, J., Asbrock, J. F., Hewitt, C., Wyles, R., . . . Baur, S. T. (2004). Performance improvements for VOx microbolometer FPAs. Paper presented at the Defense and Security.
Murry, J. W., & Hammons, J. O. (1995). Delphi: A versatile methodology for conducting qualitative research. The Review of Higher Education, 18(4), 423.
Niklaus, F., Lapisa, M., Bleiker, S. J., Dubois, V., Roxhed, N., Fischer, A., . . . Despont, M. (2012). Wafer-level heterogeneous 3D integration for MEMS and NEMS. Paper presented at the 3rd IEEE International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2012; Tokyo; 22 May 2012 through 23 May 2012.
O'reilly, R. P. S., Mcavoy, G. J., Kerr, E. R., Lawlor, V. P., Bagnat, M., Donohoe, B. K., & Ryan, E. (2016). INKJET PRINTHEAD comprising silicon-on-insulator substrate: US Patent 20,160,075,134.
Obata, S., Inoue, M., Miyagi, T., Mori, I., Sugizaki, Y., Shimooka, Y., . . . Shibata, H. (2008). In-line wafer level hermetic packages for MEMS variable capacitor. Paper presented at the 2008 58th Electronic Components and Technology Conference.
Opricovic, S. (1998). Multicriteria optimization of civil engineering systems. Faculty of Civil Engineering, Belgrade, 2(1), 5-21.
Opricovic, S., & Tzeng, G.-H. (2003). Defuzzification within a multicriteria decision model. International Journal of Uncertainty, Fuzziness and Knowledge-Based Systems, 11(5), 635-652.
Opricovic, S., & Tzeng, G.-H. (2004). Compromise solution by MCDM methods: A comparative analysis of VIKOR and TOPSIS. European Journal of Operational Research, 156(2), 445-455.
Palm, E., & Hansson, S. O. (2006). The case for ethical technology assessment (eTA). Technological Forecasting and Social Change, 73(5), 543-558.
Pearton, S. J., Abernathy, C. R., & Ren, F. (2006). Gallium nitride processing for electronics, sensors and spintronics: Springer Science & Business Media.
Peterseim, J. H., White, S., Tadros, A., & Hellwig, U. (2013). Concentrated solar power hybrid plants, which technologies are best suited for hybridisation? Renewable Energy, 57, 520-532.
Porter, A. L., Cunningham, S. W., Banks, J., Roper, A. T., Mason, T. W., & Rossini, F. A. (2011). Forecasting and management of technology. Hoboken, NJ: John Wiley & Sons.
Pratap, R., & Arunkumar, A. (2007). Material selection for MEMS devices.
Qu, H. (2016). CMOS MEMS Fabrication Technologies and Devices. Micromachines, 7(1), 14.
Quinn, D. J., Spearing, S. M., Ashby, M. F., & Fleck, N. A. (2006). A systematic approach to process selection in MEMS. Journal of Microelectromechanical systems, 15(5), 1039-1050.
Razali, R., Zin, A. M., Mokhtar, M. R., & Mirisaee, S. H. (2012). A systematic technology selection method for context-aware applications development. Research Journal of Applied Sciences, Engineering and Technology, 4(18), 3368-3374.
Roy, S., & Sarkar, C. K. (2015). MEMS and Nanotechnology for Gas Sensors: CRC Press.
Russo, G., Marsigalia, B., Evangelista, F., Palmaccio, M., & Maggioni, M. (2015). Exploring regulations and scope of the Internet of Things in contemporary companies: a first literature analysis. Journal of Innovation and Entrepreneurship, 4(1), 1-13.
Saaty, T. L. (1990). How to make a decision: The analytic hierarchy process. European Journal of Operational Research, 48(1), 9-26.
Saaty, T. L. (1996). Decision making with dependence and feedback: The analytic network process (Vol. 4922): RWS publications Pittsburgh.
Saaty, T. L. (1999). Fundamentals of the analytic network process. Paper presented at the Proceedings of the 5th international symposium on the analytic hierarchy process.
Saaty, T. L. (2005). Theory and applications of the analytic network process: decision making with benefits, opportunities, costs, and risks: RWS publications.
Saaty, T. L. (2008). Decision making with the analytic hierarchy process. International journal of services sciences, 1(1), 83-98.
Sahin, B., & Yip, T. L. (2017). Shipping technology selection for dynamic capability based on improved Gaussian fuzzy AHP model. Ocean Engineering, 136, 233-242.
Salehi, A., & Nikfarjam, A. (2004). Room temperature carbon monoxide sensor using ITO/n-GaAs Schottky contact. Sensors and Actuators B: Chemical, 101(3), 394-400.
Sanayei, A., & Monplaisir, L. F. (2013). Managing technology selection and development decisions in new product development process. Paper presented at the Proceedings of PICMET '13: Technology Management in the IT-Driven Services, San Jose, California, USA.
Sauser, B., Verma, D., Ramirez-Marquez, J., & Gove, R. (2006). From TRL to SRL: The concept of systems readiness levels. Paper presented at the Conference on Systems Engineering Research, Los Angeles, CA.
Sedky, S., Fiorini, P., Baert, K., Hermans, L., & Mertens, R. (1999). Characterization and optimization of infrared poly SiGe bolometers. IEEE transactions on Electron Devices, 46(4), 675-682.
Shehabuddeen, N., Probert, D., & Phaal, R. (2006). From theory to practice: Challenges in operationalising a technology selection framework. Technovation, 26(3), 324-335.
Shen, Y.-C., Chang, S.-H., Lin, G. T., & Yu, H.-C. (2010). A hybrid selection model for emerging technology. Technological Forecasting and Social Change, 77(1), 151-166.
Sohn, S. Y., & Ahn, B. J. (2003). Multigeneration diffusion model for economic assessment of new technology. Technological Forecasting and Social Change, 70(3), 251-264.
Solgaard, O., Godil, A. A., Howe, R. T., Lee, L. P., Peter, Y.-A., & Zappe, H. (2014). Optical MEMS: From micromirrors to complex systems. Journal of Microelectromechanical systems, 23(3), 517-538.
Spearing, S. (2000). Materials issues in microelectromechanical systems (MEMS). Acta materialia, 48(1), 179-196.
Stacey, G. S., & Ashton, W. B. (1990). A structured approach to corporate technology strategy. International Journal of Technology Management, 5(4), 389-407.
Sun, C. C. (2014). A conceptual framework for R&D strategic alliance assessment for Taiwan’s biotechnology industry. Quality & Quantity, 48(1), 259-279.
Sundmaeker, H., Guillemin, P., Friess, P., & Woelfflé, S. (2010). Vision and challenges for realising the Internet of Things. Cluster of European Research Projects on the Internet of Things, European Commision.
Sung, W. (2001). Application of Delphi method, a qualitative and quantitative analysis, to the healthcare management. Journal of Healthcare Management, 2(2), 11-19.
Tadigadapa, S., & Najafi, N. (2001). Reliability of micro-electro-mechanical systems (MEMS). Paper presented at the Micromachining and Microfabrication.
Thomas, C. W. (1996). Strategic technology assessment, future products and competitive advantage. International Journal of Technology Management, 11(5), 651-666.
Thornton, A. C. (2004). Variation risk management: focusing quality improvements in product development and production: John Wiley & Sons.
Tichy, G. (2004). The over-optimism among experts in assessment and foresight. Technological Forecasting and Social Change, 71(4), 341-363.
Tran, T. A., & Daim, T. (2008). A taxonomic review of methods and tools applied in technology assessment. Technological Forecasting and Social Change, 75(9), 1396-1405.
Tubiello, F. N., & Fischer, G. (2007). Reducing climate change impacts on agriculture: Global and regional effects of mitigation, 2000–2080. Technological Forecasting and Social Change, 74(7), 1030-1056.
Tummala, R. R. (2004). SOP: what is it and why? A new microsystem-integration technology paradigm-Moore's law for system integration of miniaturized convergent systems of the next decade. IEEE Transactions on Advanced Packaging, 27(2), 241-249.
Tzeng, G.-H., & Huang, C.-Y. (2012). Combined DEMATEL technique with hybrid MCDM methods for creating the aspired intelligent global manufacturing & logistics systems. Annals of Operations Research, 197(1), 159-190.
Uttamchandani, D. (2013). Handbook of MEMS for wireless and mobile applications: Elsevier.
van de Kaa, G., Rezaei, J., Kamp, L., & de Winter, A. (2014). Photovoltaic technology selection: A fuzzy MCDM approach. Renewable and Sustainable Energy Reviews, 32, 662-670.
van de Kaa, G., van den Ende, J., de Vries, H. J., & van Heck, E. (2011). Factors for winning interface format battles: A review and synthesis of the literature. Technological Forecasting and Social Change, 78(8), 1397-1411.
van Laarhoven, P., & Pedrycz, W. (1983). A fuzzy extension of Saaty's priority theory. Fuzzy sets and Systems, 11(1), 199-227.
Vats, S., Vats, G., Vaish, R., & Kumar, V. (2014). Selection of optimal electronic toll collection system for India: A subjective-fuzzy decision making approach. Applied Soft Computing, 21, 444-452.
Vavassori, P., Pancaldi, M., Perez‐Roldan, M. J., Chuvilin, A., & Berger, A. (2016). Remote magnetomechanical nanoactuation. Small.
Wan, S.-P., Wang, F., & Dong, J.-Y. (2016). A novel group decision making method with intuitionistic fuzzy preference relations for RFID technology selection. Applied Soft Computing, 38, 405-422.
Wang, C.-H., & Wu, H.-S. (2014). A novel framework to evaluate programmable logic controllers: A fuzzy MCDM perspective. Journal of Intelligent Manufacturing, 1-10.
Wang, F.-K., Hsu, C.-H., & Tzeng, G.-H. (2014). Applying a hybrid MCDM model for six sigma project selection. Mathematical Problems in Engineering, 2014.
Wang, Z. (2015). 3-D integration and through-silicon vias in MEMS and microsensors. Journal of Microelectromechanical systems, 24(5), 1211-1244.
Wilhite, A., & Lord, R. (2006). Estimating the risk of technology development. Engineering Management Journal-Rolla-, 18(3), 3.
Witvrouw, A., & Mehta, A. (2005). The use of functionally graded poly-SiGe layers for MEMS applications. Paper presented at the Materials science forum.
Wolstenholme, E. F. (2003). The use of system dynamics as a tool for intermediate level technology evaluation: Three case studies. Journal of Engineering and Technology Management, 20(3), 193-204.
Wong, E. (2012). Forsight Taiwan: Funding research for economic gains. Academia SINICA. Taipei.
Yeh, T.-M., Pai, F.-Y., & Liao, C.-W. (2014). Using a hybrid MCDM methodology to identify critical factors in new product development. Neural Computing and Applications, 24(3-4), 957-971.
YoleDeveloppement. (2016). 2016, a new virtuous cycle? Retrieved 29 December, 2016, from http://www.yole.fr/MEMS_Market_Trends%20(2).aspx#.WGSIY1V97Dc
Yu, P.-L. (1973). A class of solutions for group decision problems. Management science, 19(8), 936-946.
Yu, P., & Lee, J. H. (2013). Optimal technology selection considering input levels of resource. Industrial Management & Data Systems, 113(1), 57-76.
Zadeh, L. A. (1965). Fuzzy sets. Information and control, 8(3), 338-353.
Zahn, J. D., Gabriel, K. J., & Fedder, G. K. (2002). A direct plasma etch approach to high aspect ratio polymer micromachining with applications in bioMEMS and CMOS-MEMS. Paper presented at the Micro Electro Mechanical Systems, 2002. The Fifteenth IEEE International Conference on.
Zami, M., & Lee, A. (2009). A review of the in-depth interview technique: to understand the factors influencing adoption of stabilized earth construction to address low cost urban housing crisis in Zimbabew: Lancashire: University of Salford.
Zeleny, M. (1982). Multiple Criteria Decision Making: McGraw-Hill.
Zha, X. F. (2006). Manufacturing advisory service system for concurrent and collaborative design of MEMS devices MEMS/NEMS (pp. 1-34): Springer.
Zha, X. F., & Du, H. (2003). Manufacturing process and material selection in concurrent collaborative design of MEMS devices. Journal of Micromechanics and Microengineering, 13(5), 509.
Zhang, Z., Xi, P., Xiong, L., Wang, J., & Shi, T. (2016). Methods of forming MEMS device: Google Patents.
Zhou, Q., Huang, W., & Zhang, Y. (2011). Identifying critical success factors in emergency management using a fuzzy DEMATEL method. Safety science, 49(2), 243-252.
Zimmer, F., Lapisa, M., Bakke, T., Bring, M., Stemme, G., & Niklaus, F. (2011). One-megapixel monocrystalline-silicon micromirror array on CMOS driving electronics manufactured with very large-scale heterogeneous integration. Journal of Microelectromechanical systems, 20(3), 564-572.