資料載入處理中...
臺灣人文及社會科學引文索引資料庫系統
:::
網站導覽
國圖首頁
聯絡我們
操作說明
English
行動版
(18.119.136.146)
登入
字型:
**字體大小變更功能,需開啟瀏覽器的JAVASCRIPT,如您的瀏覽器不支援,
IE6請利用鍵盤按住ALT鍵 + V → X → (G)最大(L)較大(M)中(S)較小(A)小,來選擇適合您的文字大小,
如為IE7以上、Firefoxy或Chrome瀏覽器則可利用鍵盤 Ctrl + (+)放大 (-)縮小來改變字型大小。
來源文獻查詢
引文查詢
瀏覽查詢
作者權威檔
引用/點閱統計
我的研究室
資料庫說明
相關網站
來源文獻查詢
/
簡易查詢
/
查詢結果列表
/
詳目列表
:::
詳目顯示
第 1 筆 / 總合 1 筆
/1
頁
來源文獻資料
摘要
外文摘要
引文資料
題名:
偏態校正方法之目標平均數管制圖的設計
書刊名:
危機管理學刊
作者:
高世州
/
李陽榮
作者(外文):
Kao, S. C.
/
Li, Y. J.
出版日期:
2009
卷期:
6:1
頁次:
頁79-86
主題關鍵詞:
製程能力指標
;
品質損失函數
;
偏態校正
;
管制圖
;
Process capability index
;
Quality loss function
;
Skewness correction
;
Control chart
原始連結:
連回原系統網址
相關次數:
被引用次數:期刊(0) 博士論文(0) 專書(0) 專書論文(0)
排除自我引用:0
共同引用:0
點閱:17
近年來,製程能力指標(process capability index)與管制圖爲統計製程管制的重要工具之一,對於品質及生產力之改善有非常良好的效果。本研究利用製程能力指標結合損失函數與偏態校正(skewness correction)方法建構目標平均數管制圖,本研究所提出的管制圖較傳統管制圖更適合使用在偏態的製程上面;再者,因爲採取偏態校正的方法決定管制界限,因此本研究所提出的管制圖會有較低的型一錯誤(type I error)機率,並且也提供品質改善的目標建議。本研究以汽車風箱上蓋爲例,透過本研究所提出的方法評估產品製程,其結果顯示本研究的方法可協助企業改善產品品質、降低品質成本和提升市場競爭優勢。
以文找文
Process capability index and control chart are important tools in the statistical quality control and they have a good effectiveness on monitoring and improving a process. The study considers the process capability index, quality loss function and skewness correction method to conduct a goal control chart. The proposed control chart is more suitable to be used to monitor a non-normal process than a traditional control chart. Moreover, the proposed control chart has low type I error probabilities on monitoring a non-normal process since it employs skewness correction method to determine control limits and provides a goal suggestion of quality improvement. This study also considers the proposed goal control chart using the top of a motor evaporator. In the example, the goal standard deviation and control limits can help practitioners in making production decisions and improving a process.
以文找文
期刊論文
1.
Bai, D.S.、Choi, I.S.(1995)。and control charts for skewed populations。Journal of Quality Technology,27,120-131。
2.
Chan, L. K.、Xiong, Z.、Zhang, D.(1990)。On the asymptotic distributions of some process capability indices。Communication in Statistics--Theory and Methods,19(1),11-18。
3.
Chan, L.K.、Cui, HJ.(2003)。Skewness correction and Charts for skewed distributions。Naval Research Logistics,50,556-573。
4.
Choobineh, F.、Ballard, J. L.(1987)。Control-limits of QC Charts for skewed distributions using weighted-variance。IEEE Transactions on Reliability,R-36(4),473-477。
5.
Ferrell, E.B.(1958)。Control charts for log-normal universe。Industrial Quality Control,15,4-6。
6.
Nelson, P.R.(1979)。Control charts for Weibull processes with standards given。IEEE Transactions on Reliability,28,283-287。
7.
Singhal, S. C.(1991)。Multi-process performance analysis chart ( MPPAC ) with capability zones。Quality of Engineering,4(1),75-81。
8.
吳信宏(20030100)。Quality Management: A Target Costing Approach。工業工程學刊,20(1),13-20。
延伸查詢
9.
Boyles, R. A.(1994)。Process capability with asymmetric tolerances。Communications in Statistics: Simulation and Computation,23(3),615-643。
10.
Choi, B. C.、Owen, D. B.(1990)。A study of a new capability index。Communications in Statistics: Theory and Methods,19,1231-1245。
11.
Pearn, W. L.、Kotz, S.、Johnson, N. L.(1992)。Distributional and inferential properties of the process accuracy and process precision indices。Journal of Quality Technology,24(4),216-231。
12.
Chen, K. S.、Pearn, W. L.(1997)。An application of non-normal process capability indices。Quality and Reliability Engineering International,13,355-360。
13.
Boyles, R. A.(1991)。The Taguchi capability index。Journal of Quality Technology,23(1),17-26。
14.
Chan, L. K.、Cheng, S. W.、Spiring, F. A.(1988)。A new measure of process capability: Cpm。Journal of Quality Technology,20(3),162-175。
15.
Kane, Victor E.(1986)。Process capability indices。Journal of Quality Technology,18(1),41-52。
圖書
1.
Cowden, D.J.(1957)。Statistical Methods in Quality Control。Englewood Cliffs, NJ:Prentice-Hall。
2.
Montgomery, D. C.(2005)。Introduction to Statistical Quality Control。New York:John Wiley and Sons, Inc.。
3.
Lovelace, C.、Kotz, S.(1998)。Process Capability Indices in Theory and Practice。London:Arnold。
4.
Kotz, Samuel、Johnson, Norman L.(1993)。Process Capability Indices。Chapman and Hill。
5.
Juran, J. M.、Gryan, F. M.、Brigham, R. S.(1974)。Quality control handbook。New York:McGraw-Hill Book CO.。
6.
田口玄一(1986)。Introduction to Quality Engineering: Designing Quality into Products and Processes。Tokyo:Asian Productivity Organization。
圖書論文
1.
Finley, J.C.(1992)。What is capability? Or What is Cp and Cpk。ASQC Quality Congress Transactions。Nashville。
推文
當script無法執行時可按︰
推文
推薦
當script無法執行時可按︰
推薦
引用網址
當script無法執行時可按︰
引用網址
引用嵌入語法
當script無法執行時可按︰
引用嵌入語法
轉寄
當script無法執行時可按︰
轉寄
top
:::
相關期刊
相關論文
相關專書
相關著作
熱門點閱
1.
Quality Management: A Target Costing Approach
1.
多注頭製程製程能力指標之研究
無相關書籍
無相關著作
無相關點閱
QR Code