| 期刊論文| 1. | Lee, H. L.、Rosenblatt, M. J.(1987)。Simultaneous Determination of Production Cycle and Inspection Schedules in a Production System。Management Science，33(9)，1125-1136。   | | 2. | Lee, M. K.、Elsayed, E. A.(2002)。Process mean and screening limits for filling processes under two-stage screening procedure。European Journal of Operational Research，138，118-126。 | | 3. | Lee, M. K.、Hong, S. H.、Elsayed, E. A.(2001)。The optimum target value under single and two-stage screenings。Journal of Quality Technology，33，506-514。 | | 4. | Lee, M. K.、Hong, S. H.、Kwon, H. M.、Kim, S. B.(2000)。Optimum process mean and screening limits for a production process with three-class screening。International Journal of Reliability, Quality and Safety Engineering，7，179-190。 | | 5. | Misiorek, V. I.、Barrnett, N. S.(2000)。Mean selection for filling processes under weights and measures requirements。Journal of Quality Technology，32，111-121。 | | 6. | Rahim, M. A.、Tuffaha, F.(2004)。Integrated model for determining the optimal initial settings of the process mean and optimal production run assuming quadratic loss functions。International Journal of Production Research，42(16)，3281-3300。 | | 7. | Rosenblatt, M. J.、Lee, H. L.(1986)。A comparative study of continuous and periodic inspection policies in deteriorating production systems。IIE Transactions，18(1)，2-9。 | | 8. | Rosenblatt, Meir J.、Lee, Hau L.(1986)。Economic production cycles with imperfect production processes。IIE Transactions，18(1)，48-55。 | | 9. | Lee, H. L.、Rosenblatt, M. J.(1989)。A production and maintenance planning model with restoration cost dependent on detection delay。IIE Transaction，21(4)，368-375。 | 圖書| 1. | Silver, E. A.、Peterson, R.(1985)。Decision Systems for Inventory Management and Production Planning。New York：Wiley。 | 其他| 1. | Chen, S. L. and Chung, K. J.(1996)。Determining of the optimal production run and the most profitable process mean for a production process。 | | 2. | Duffuaa, S. O. and Siddiqui, A. W.(2002)。Integrated process targeting and product uniformity model for three-class screening。 | | 3. | Duffuaa, S. O. and Siddiqui, A. W.(2003)。Process targeting with multi-class screening and measurement error。 | | 4. | Lee, M. K., Kim, S. B., Kwon, H. M. and Hong, S. H.(2004)。Economic selection of mean value for a filling process under quadratic quality loss。 | | 5. | Lee, J. S. and Park, K. S.(1991)。Joint determination of production cycle and inspection intervals in a deteriorating production system。 | | 6. | Liou M. J., Tseng, S. T. and Lin, T. M.(1994)。The effects of inspection errors to the imperfect EMQ model。 | | 7. | Makis, V.(1998)。Optimal lot sizing and inspection policy for an EMQ model with imperfect inspections。 | | 8. | Porteus, E. L.(2000)。Optimal lot sizing, process quality improvement and set-up cost reduction。 | |