期刊論文1. | Chang, H.-H.(2006)。Dynamic multi-response experiments by back propagation networks and desirability functions。Journal of the Chinese Institute of Industrial Engineers,23(4),280-288。 |
2. | Ciftci, I.、Turker, M.、Sekar, U.(2004)。Evaluation of tool wear when machining SiC reinforced Al-2014 alloy matrix composites。Materials and Design,25,251-255。 |
3. | Dabade, U.A.、Sonawane, H. A.、Joshi, S.(2010)。Cutting forces and surface roughness in machining Al/SICP composites of varying composition。Machining Science and Technology,14,258-279。 |
4. | Davim, J. P.(2000)。An experimental study of tribological behaviour of the brass/steel pair。Journal of Materials Processing Technology,100,273-279。 |
5. | Davim, J. P.(2003)。Design optimization of cutting parameters for turning metal matrix composites based on the orthogonal arrays。Journal of Materials Processing Technology,132,340-344。 |
6. | Davim, J. P.(2003)。Study of drilling metal matrix composites based on the taguchi techniques。Journal of Materials Processing Technology,132,250-254。 |
7. | Deonath、Rohatgi, P. K.(1981)。Cast aluminium alloy composites containing copper-coated ground mica particles。Journal of Materials Science,16,1599-1606。 |
8. | Gallab, M.、Sklad, M.(1998)。Machining of Al/SiCp metal matrix composites. Part II: workpiece integrity。Journal of Materials Processing Technology,83,277-283。 |
9. | 徐志明(20010900)。Solving Multi-Response Problems through Neural Networks and Principal Component Analysis。工業工程學刊,18(5),47-54。 |
10. | Kremer, A.、Devillez, S.、Dominiak, D.、Dudzinski, M.、Mansori, E.I.(2010)。Machinability of Al/Sic particulate metal-matrix composites under dry conditions with cvd diamond-coated carbide tools。Machining Science and Technology,12,214-233。 |
11. | Lin, J. T.、Bhattacharya, D.、Kecman, V.(2003)。Multiple regression and network analysis in composite machining。Composites Science and Technology,63(3),539-548。 |
12. | Manna, A.、Bhattacharya, B.(2003)。A study of machinability of Al-SiC-MMC。Journal of Materials Processing Technology,140,711-716。 |
13. | Monaghan, J.、O'Reilly, P.(1992)。The drilling of an Al/SiC metal matrix composites。Journal of Materials Processing Technology,33,469-480。 |
14. | Morscher, G. N.、Ojard, G.、Miller, R.、Gowayed, Y.、Santhosh, U.、Ahmad, J.(2008)。Tensile creep and fatigue of Sylramic-iBN melt-infiltrated SiC matrix composites: retained properties, damage development, and failure mechanisms。Composites Science and Technology,68,3305-3313。 |
15. | Mubaraki, B.、Bandyopadhyay, S.、Fowle, R. F.、Mathew, P.、Health, P. J.(1995)。Drilling studies of an Al203âAl metal matrix composite. Part I. Drill wears characteristics。Journal of Materials Science,30,6273-6280。 |
16. | Naveen Sait, A.、Aravindan, S.、Noorul Hag, A.(2009)。Optimisation of machining parameters of glassfibreâ reinforced plastic (GFRP) pipes by desirability function analysis using Taguchi technique。International Journal of Advanced Manufacturing Technology,43,581-589。 |
17. | Ozben, T.、Kilickap, E.、Cakir, O.(2008)。Investigation of mechanical and machinability properties of SiC particle reinforced Al-MMC。Journal of Materials Processing Technology,198(1),220-225。 |
18. | Palanikumar, K.、Karthikeyan, R.(2007)。Assessment of factors influencing surface roughness on the machining of Al/SiC particulate composites。Materials and Design,28,1584-1591。 |
19. | Palanikumar, K.、Muthukrishnan, N.、Hariprasad, K. S.(2008)。Surface roughness parameters optimization in machining A356/sic/20p metal matrix composites by PCD tool using response surface methodology and desirability function。Machining Science and Technology,12,529-545。 |
20. | Pendse, D. M.、Joshi, S. S.(2004)。Modeling and optimization of machining process in discontinuously reinforced aluminium matrix composites。Machining Science and Technology,8,85-102。 |
21. | Rajmohan, T.、Palanikumar, K.(2011)。Experimental investigation and analysis of thrust force in drilling hybrid metal matrix composites by coated carbide drills。Materials and Manufacturing Processes,26,961-968。 |
22. | Rajmohan, T.、Palanikumar, K.(2012)。Optimization of machining parameters for surface roughness and burr height in drilling hybrid composites。Materials and Manufacturing Processes,27(3),320-328。 |
23. | Ramulu, M.、Rao, P. N.、Kao, H.(2002)。Drilling of Al203 p /6061 metal matrix composite。Journal of Materials Processing Technology,124,244-254。 |
24. | Rouby, D.、Reynaud, P.(1993)。Fatigue behaviour related to interface modification during load cycling in ceramic-matrix fibre composites。Composites Science and Technology,48,109-118。 |
25. | Sahin, Y.、Kok, M.、Celik, H.(2002)。Tool wear and surface roughness of Al2O3 particleâreinforced aluminium alloy composites。Journal of Materials Processing Technology,128,280-291。 |
26. | Seeman, M.、Ganesan, G.、Karthikeyan, R.、Velayudam, A.(2010)。Study on tool wear and surface roughness in machining of particulate aluminium metal matrix composite-response surface methodology approach。International Journal of Advanced Manufacturing Technology,48(5-8),613-624。 |
27. | Taguchi, G.(1993)。Taguchi on Robust Technology Development Methods。 |
28. | Tomac, N.、Tonnessen, K.(1992)。Machinability of particulate aluminum metal matrix composites。Annals of the CIRP,41,55-58。 |
29. | Tosun, N.(2006)。Determination of optimum parameters for multi-performance characteristics in drilling using grey relational analysis。International Journal of Advanced Manufacturing Technology,28,450-455。 |
30. | Tsai, T.-N.(2009)。Modeling and optimization of heat flow thermal profiling operation: A comparative study。Journal of the Chinese Institute of Industrial Engineers,26(6),480-492。 |
31. | Tsao, C. C.、Hocheng, H.(2004)。Taguchi analysis of delamination associated with various drill bits in drilling of composite material44,1085-1090。 |
32. | Weinert, K.(1993)。A consideration of tool wear mechanism when machining metal matrix composites (MMC)。CIRP Annals,42,95-98。 |
33. | Yaming, Q.、Zehua, Z.(2000)。Tool wear and its mechanism for cutting SiC particle reinforced aluminum matrix composites。Journal of Materials Processing Technology,100(1-3),194-199。 |