:::

詳目顯示

回上一頁
題名:削皮器操作行為模式應用設計
書刊名:設計研究學報
作者:賴志純宋怡璇
作者(外文):Lai, Chih-chunSung, Yi-hsuan
出版日期:2011
卷期:4
頁次:頁67-81
主題關鍵詞:削皮器反向握持產品語意學PeelerOpposite holdProduct semantics
原始連結:連回原系統網址new window
相關次數:
  • 被引用次數被引用次數:期刊(0) 博士論文(0) 專書(0) 專書論文(0)
  • 排除自我引用排除自我引用:0
  • 共同引用共同引用:2
  • 點閱點閱:7
目前市面上所販售的各式削皮器中,造型、材質十分多元,但由於產品語意的表達尚不夠明確,導致使用者在使用削皮器時,易產生各種姿勢。本研究改進市售中的一款削皮器,探討使用者對於暗示性使用方式的接受程度,並找出使用時的最舒適尺寸。本研究隨機抽查12位使用者的使用方式,經由統計及比較分析後,擬定反向為研究方向。利用人因操作實驗模式探討使用削皮器時相關的4項人體計測項目,將所得之數據與產品語意結合,設計出一款改良後之削皮器並統一使用模式做再一次的調查。最後利用問卷的方式了解使用者的滿意度,再經統計、T檢定,進而確認設計是否符合預期。由研究結果得知,於外觀增添暗示性的符號或特徵,進而引導使用者依照產品原本應有的方式使用,在運用產品語意與操作行為模式來設計與改善削皮器產品的設計是可被接受的。此外,反向握持使用削皮器時,大拇指距離刀刃8cm,大拇指與食指的握持夾角為80度的情況下,為最佳握持位置。
There are various kinds of peelers on the market. However, due to the unclearness of Product Semantics, it leads to diverse gesture of subjects. This study improved one of the peelers on the market. This improvement analyzed subjects' acceptance of implication manner and found out the most comfortable proportion (size of the peeler). At the beginning of the research, picked 12 subjects randomly and observe subjects' holding methods. After a series of statistical analysis and comparison, aim the research on the downward holding method. Next, picked another 12 peeler subjects randomly and record 4 different set of body measurement while using the peeler, then combine the data and the product semantic to improve the design of the peeler. Finally, through Statistical analysis and T-test to confirm the outcome (new improved design of the peeler) fits subjects' expectation.When the implicative sign or traits on the appearance of products are added, it would lead subjects to use the product in the original (correct) manner. This kind of improvement by Product Semantics is acceptable. The result showed the best holding position of the peeler have to fit the following conditions. 1. The holding position of the peeler has to be downward holding. 2. The distance between the thumb and the blade of the peeler has to be 8 cm. 3. The angle of the thumb and index finger while holding the peeler has to be 80 degrees.
期刊論文
1.Marras, W. S.、Schoenmarklin, R. W.(1993)。Wrist motions in industry。Ergonomics,36(4),341-351。  new window
2.Giard, Jacques(1990)。Produce Semantics and Communication-Matching the Meaning to the Signal。Semantic Visions in Design, UIAH,1-7。  new window
3.黃啟梧(19960700)。如何教產品說話--產品語意與易用性。工業設計,25(3)=94,50-52。new window  延伸查詢new window
4.Silverstein, B. A.、Fine, L. J.、Armstrong, T. J.(1986)。Hand wrist cumulative trauma disorders in industry。British Journal of Industrial Medicine,43(11),779-784。  new window
5.王明嘉(19950300)。從視覺影像到視覺意義。藝術家,40(3)=238,260-265。  延伸查詢new window
會議論文
1.Krippendorff, Klaus(1989)。Product Semantics: A triangulation and four design theories。Product Semantics '89 Conference,3-23。  new window
學位論文
1.陳維鈞(1998)。產品操作提示的研究--以印表機為例(碩士論文)。國立雲林科技大學。  延伸查詢new window
圖書
1.李正隆、陳志勇(1992)。勞工衛生安全簡訊。  延伸查詢new window
2.Pu, T. Z.、Anderson, V.(1988)。Cumulative trauma disorders: A manual for musculoskeletal diseases of the upper limbs。Philadelphia:Taylor & Francis。  new window
3.Woodson, Wesley E.(1981)。Human Factors Design Handbook。McGrae Hill。  new window
4.McCoy(1989)。Design in the information Age。New York:New American Design。  new window
5.Bürdek, Bernhard E.、胡佑宗(1996)。工業設計:產品造型的歷史、理論及實務。臺北:亞太圖書出版社。  延伸查詢new window
6.鄭麗玉(1993)。認知心理學:理論與應用。臺北:五南圖書。  延伸查詢new window
7.Solso, R. L.、吳玲玲(1999)。認知心理學。臺北:華泰書局。  延伸查詢new window
8.Norman, D. A.、Draper, S. W.(1986)。User Centered System Design: New perspectives on Human-Computer Interaction。Lawrence Erlbaum Associates。  new window
單篇論文
1.Fellows, G. L.,Freivalds, A.(1991)。Ergonomics evaluation of a foam ruB.B.er grip for tool handles。  new window
其他
1.Krippendorff,Butter(1911)。發表之產品語意學Product Semantics之專題演講,台北工專。  延伸查詢new window
 
 
 
 
第一頁 上一頁 下一頁 最後一頁 top
QR Code
QRCODE