期刊論文1. | Belmiro, P. M. D.、Pedro, M. S.(2010)。An optimizationbased framework for designing acceptance sampling plans by variables for non-conforming proportions。International Journal of Quality & Reliability Management,27,794-814。 ![](/gs32/thssjcncl/image/nclsfx.gif) ![new window](/gs32/images/newin.png) |
2. | Boylan, G. L.、Goethals, P. L.、Cho, B. R.(2013)。Robust parameter design in resource-constrained environments: an investigation of trade-offs between costs and precision within variable processes。Applied Mathematical Modeling,37,2394-2416。 ![](/gs32/thssjcncl/image/nclsfx.gif) ![new window](/gs32/images/newin.png) |
3. | Chen, Chung-ho(20050900)。Rectifying Inspection Plans Applied in the Determination of the Optimum Process Mean。International Journal of Information and Management Sciences,16(3),85-95。 ![](/gs32/thssjcncl/image/nclsfx.gif) ![new window](/gs32/images/newin.png) |
4. | Darwish, M. A.、Abdulmalek, F.(2012)。An integrated single-vendor single-buyer targeting problem with time-dependent process mean。International Journal of Logistics and Management,13,51-64。 ![](/gs32/thssjcncl/image/nclsfx.gif) ![new window](/gs32/images/newin.png) |
5. | Darwish, M. A.、Abdulmalek, F.、Alkhedher, M.(2013)。Optimal selection of process mean for a stochastic inventory model。European journal of Operational Research,226,481-490。 ![](/gs32/thssjcncl/image/nclsfx.gif) ![new window](/gs32/images/newin.png) |
6. | Darwish, M. A.、Duffuaa, S. O.(2010)。A mathematical model for the joint determination of optimal process and sampling plan parameters。Journal of Quality in Maintenance Engineering,16,181-189。 ![](/gs32/thssjcncl/image/nclsfx.gif) ![new window](/gs32/images/newin.png) |
7. | Duffuaa, S. O.、El-Ga'aly, A.(2013)。A multi-objective mathematical optimization model for process targeting using 100% inspection policy。Applied Mathematical Modeling,37,1545-1552。 ![](/gs32/thssjcncl/image/nclsfx.gif) ![new window](/gs32/images/newin.png) |
8. | Duffuaa, S. O.、El-Ga'aly, A.(2013)。A multi-objective optimization model for process targeting using sampling plans。Computers & Industrial Engineering,64,309-317。 ![](/gs32/thssjcncl/image/nclsfx.gif) ![new window](/gs32/images/newin.png) |
9. | Goethals, P. L.、Cho, B. R.(2011)。The development of multi-response experimental designs for process parameter optimization。International Journal of Quality & Reliability Management,28,628-648。 ![](/gs32/thssjcncl/image/nclsfx.gif) ![new window](/gs32/images/newin.png) |
10. | Goethals, P. L.、Cho, B. R.(2011)。Using higher precision-based response surface designs to determine the optimal process target。International Journal of Advanced Manufacturing Technology,56,13-30。 ![](/gs32/thssjcncl/image/nclsfx.gif) ![new window](/gs32/images/newin.png) |
11. | Goethals, P. L.、Cho, B. R.(2011)。Reverse programming the optimal process mean problem to identify a factor space profile。European Journal of Operational Research,215(1),204-217。 ![](/gs32/thssjcncl/image/nclsfx.gif) ![new window](/gs32/images/newin.png) |
12. | Jeang, A.(2013)。Concurrent product and process parameters determination under deterioration process。Applied Mathematics and Computation,219,9132-9141。 ![](/gs32/thssjcncl/image/nclsfx.gif) ![new window](/gs32/images/newin.png) |
13. | Klufa, J.(1994)。Acceptance sampling by variables when the remainder of rejected lots is inspected。Statistical Papers,35,337-349。 ![](/gs32/thssjcncl/image/nclsfx.gif) ![new window](/gs32/images/newin.png) |
14. | Klufa, J.(1997)。Dodge-Romig AOQL single sampling plans for inspection by variables。Statistical Papers,38,111-119。 ![](/gs32/thssjcncl/image/nclsfx.gif) ![new window](/gs32/images/newin.png) |
15. | Pearn, W. L.、Wu, C. W.(2006)。Critical acceptance values and sample sizes of a variables sampling plan for very low fraction of defective。Omega,26,90-101。 ![](/gs32/thssjcncl/image/nclsfx.gif) ![new window](/gs32/images/newin.png) |
16. | Tahera, K.、Ibahim, R. N.、Lochert, P. B.(2010)。The effect of non-constant process variance in determining the optimal process means and production run of a deteriorating process。Production Planning & Control,219,9132-9141。 ![](/gs32/thssjcncl/image/nclsfx.gif) ![new window](/gs32/images/newin.png) |
17. | Boucher, T. O.、Jafari, M. A.(1991)。The Optimum Target Value for Single Filling Operations with Quality Sampling Plans。Journal of Quality Technology,23,44-47。 ![](/gs32/thssjcncl/image/nclsfx.gif) ![new window](/gs32/images/newin.png) |
18. | Bowling, S. R.、Khasawneh, M. T.、Kaewkuekool, S.、Cho, B. R.(2004)。A Markovian approach to determining optimum process target levels for a multi-stage serial production system。European Journal of Operational Research,159,636-650。 ![](/gs32/thssjcncl/image/nclsfx.gif) ![new window](/gs32/images/newin.png) |
19. | Carlsson, O.(1984)。Determining the most profitable process level for a production process under different sales conditions。Journal of Quality Technology,16,44-49。 ![](/gs32/thssjcncl/image/nclsfx.gif) ![new window](/gs32/images/newin.png) |
20. | Hunter, W.、Kartha, C.(1977)。Determining the most profitable target value for a production process。Journal of Quality Technology,9,176-181。 ![](/gs32/thssjcncl/image/nclsfx.gif) ![new window](/gs32/images/newin.png) |
21. | Lee, M. K.、Kwon, H. M.、Hong, S. H.、Kim, Y. J.(2007)。Determination of the optimum target value for a production process with multiple products。International Journal of Production Economics,107,173-178。 ![](/gs32/thssjcncl/image/nclsfx.gif) ![new window](/gs32/images/newin.png) |
22. | Selim, S. Z.、Al-Zu'bi, W. K.(2011)。Optimal means for continuous processes in series。European Journal of Operational Research,210(3),618-623。 ![](/gs32/thssjcncl/image/nclsfx.gif) ![new window](/gs32/images/newin.png) |
23. | Shin, S.、Kongsuwon, P.、Cho, B. R.(2010)。Development of the parametric tolerance modeling and optimization schemes and cost-effective solutions。European Journal of Operational Research,207,1728-1741。 ![](/gs32/thssjcncl/image/nclsfx.gif) ![new window](/gs32/images/newin.png) |
24. | Springer, C.(1951)。A method for determining the most economic position of a process mean。Industrial Quality Control,8,36-39。 ![](/gs32/thssjcncl/image/nclsfx.gif) ![new window](/gs32/images/newin.png) |
25. | Carlsson, O.(1989)。Economic selection of a process level under acceptance sampling by variables。Engineering Costs and Production Economics,16,69-78。 ![](/gs32/thssjcncl/image/nclsfx.gif) ![new window](/gs32/images/newin.png) |
26. | Jeang, A.(2010)。Production order quantity for economical and quality consideration。Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,224,1277-1294。 ![](/gs32/thssjcncl/image/nclsfx.gif) ![new window](/gs32/images/newin.png) |
27. | Pulak, M. F. S.、Al-Sultan, K. S.(1996)。The Optimum Targeting for a Single Filling Operation with Rectifying Inspection。Omega: The International Journal of Management Science,24(6),727-733。 ![](/gs32/thssjcncl/image/nclsfx.gif) ![new window](/gs32/images/newin.png) |