資料載入處理中...
臺灣人文及社會科學引文索引資料庫系統
:::
網站導覽
國圖首頁
聯絡我們
操作說明
English
行動版
(13.59.192.225)
登入
字型:
**字體大小變更功能,需開啟瀏覽器的JAVASCRIPT,如您的瀏覽器不支援,
IE6請利用鍵盤按住ALT鍵 + V → X → (G)最大(L)較大(M)中(S)較小(A)小,來選擇適合您的文字大小,
如為IE7以上、Firefoxy或Chrome瀏覽器則可利用鍵盤 Ctrl + (+)放大 (-)縮小來改變字型大小。
來源文獻查詢
引文查詢
瀏覽查詢
作者權威檔
引用/點閱統計
我的研究室
資料庫說明
相關網站
來源文獻查詢
/
簡易查詢
/
查詢結果列表
/
詳目列表
:::
詳目顯示
第 1 筆 / 總合 1 筆
/1
頁
來源文獻資料
摘要
外文摘要
引文資料
題名:
CTP版材製程失效風險之分析與評估
書刊名:
危機管理學刊
作者:
洪僖黛
/
梁紹任
作者(外文):
Hung, H. T.
/
Liang, S. R.
出版日期:
2018
卷期:
15:2
頁次:
頁33-41
主題關鍵詞:
CTP版材
;
資料包絡分析法
;
失效模式與效應分析
;
風險優先指數
;
Computer-to-plate
;
CTP plate
;
Data envelopment analysis
;
Failure mode and effects analysis
;
FMEA
;
Risk priority number
;
RPN
原始連結:
連回原系統網址
相關次數:
被引用次數:期刊(0) 博士論文(0) 專書(0) 專書論文(0)
排除自我引用:0
共同引用:0
點閱:8
CTP版材具有大幅縮短印前製程時間、材料使用的成本、以及提高印刷產能等特點,然而CTP版材製程的失效原因對CTP板材的品質具有決定性的影響。失效模式與效應分析(failure mode and effects analysis, FMEA)是一種預防性的風險管理技術,主要應用於分析與辨認產品設計系統的潛在失效模式,並根據風險優先指數(risk priority number, RPN)決定失效模式的改善順序,藉由適當的改善措施來降低失效率與提高可靠度;換言之,各個失效模式乃是以RPN為評比準則來進行排序,RPN數值越大表示失效風險越高,須優先立即改善。本研究之主要目的是基於資料包絡分析法(data envelopment analysis, DEA)適用於決定多屬性決策分析問題(multiple attributes decision making, MADM)評估屬性權重之特性,將決定失效模式RPN的嚴重性、發生率、以及難檢度等風險因子視為評估屬性,在DEA的概念下,根據妥協規劃排序模式來構建CTP版材製程失效模式之評比指標RPN;除此之外,針對屬於不同風險分級的失效模式提出設定風險評估因子改進目標的方法,以達到實施FMEA降低CTP版材製程失效風險的目的。
以文找文
CTP plate has some advantages for printing industry, e.g. shorter lead time for printing, less material cost, and higher production capacity. This study applies failure mode and effects analysis (FMEA) to explore the causes and the effects in manufacturing CTP plate. Failure mode and effects analysis (FMEA) is a preventive technology of risk management that is applied to analyze and to identify the potential failure modes in a system. The risk priorities of the failure modes are determined through the risk priority number (RPN), and appropriate improvement actions can be taken for decreasing the error. The RPN has the advantage of easy calculation and comparison, but it has been criticized to have some drawbacks. In order to improve the disadvantages, this study considers the three risk factors as the attributes of a multiple attributes decision making (MADM) problem and the RPN is the criterion for comparing different failure modes. The characteristic of data envelopment analysis (DEA) is applied to determine the weights of the attributes. Based on the compromise programming ranking method in DEA, the evaluation and the ranking models of the RPN are proposed in this study. Moreover, by the RPN resulted from the proposed models, the method for setting the improvement target of the RPN is also developed. The results of ranking and classification of all failure modes could help the manufacturers to understand the causes and the effects in manufacturing CTP plate. Furthermore, they could decrease the failure risk in CTP manufacturing process and improve the quality of CTP plate.
以文找文
期刊論文
1.
Battles, J. B.、Dixon, N. M.、Borotkanics, R. J.、Rabin-Fastmen, B.、Kaplan, H. S.(2006)。Sensemaking of patient safety and hazards。Health Services Research,41,1555-1575。
2.
Teng, S. G.、Ho, S. M.、Shumar, D.、Liu, P. C.(2006)。Implementing FMEA in a collaborative supply chain environment。The International Journal of Quality & Reliability Management,23(2),179-196。
3.
Welborn, C.(2007)。Using FMEA to assess outsourcing risk。Quality Progress,40,17-21。
4.
Pillay, A.、Wang, J.(2003)。Modified failure mode and effects analysis using approximate reasoning。Reliability Engineering and System Safety,79(1),69-85。
5.
Chang, K. H.、Cheng, C. H.(2011)。Evaluating the risk of failure using the fuzzy OWA and DEMATEL method。Journal of Intelligent Manufacturing,22(2),113-129。
6.
Adler, N.、Friedman, L.、Sinuany-Stern, Zilla(2002)。Review of ranking methods in the data envelopment analysis context。European Journal of Operational Research,140(2),249-265。
7.
Chin, K.-S.、Wang, Y.-M.、Poon, G. K. K.、Yang, J.-B.(2009)。Failure mode and effects analysis using a group-based evidential reasoning approach。Computers and Operations Research,36(6),1768-1779。
8.
陳昌郎、鄭松福(2009)。CTP熱感版客戶滿意度之研究。中華印刷科技年報,441-472。
延伸查詢
學位論文
1.
Singor, M. C.(2000)。The Failure Analysis Matrix: A Usable Model for Ranking Solutions to Failures in Information Systems(-)。Nova Southeastern University。
圖書
1.
Chankong, V.、Haimes, Y. Y.(1983)。Multiobjective Decision Making: Theory and Methodology。Elsevier Science Publishing Company, Inc.。
2.
Yu, Po-Lung(1985)。Multiple-Criteria Decision Making, Concepts, Techniques, and Extensions。Plenum Press。
3.
Zeleny, Milan(1982)。Multiple Criteria Decision Making。McGraw-Hill, Inc.。
推文
當script無法執行時可按︰
推文
推薦
當script無法執行時可按︰
推薦
引用網址
當script無法執行時可按︰
引用網址
引用嵌入語法
當script無法執行時可按︰
引用嵌入語法
轉寄
當script無法執行時可按︰
轉寄
top
:::
相關期刊
相關論文
相關專書
相關著作
熱門點閱
1.
DEA在失效風險評估模式之應用
2.
塑膠模具失效模式之風險分級與排序
1.
引發糾紛之團體套裝旅遊服務失誤風險的研究
2.
應用資料包絡分析法於失效模式與效應分析以增強評估能力之研究
無相關書籍
無相關著作
1.
The Effect of Leisure Motivation on Visitors' Destination Satisfaction toward Tourist Night Markets: Comparison of Domestic Tourists and Local Residents
2.
中小企業也能善盡社會責任?--社會資本觀點
3.
Information Content of Continuous and Jump Decomposition of Variances
4.
Corporate Social Network and Bank Loan Contract
5.
Volatility Spreads and Patent Announcement Returns
6.
自然風對高雄過港隧道火場搶救策略之影響
7.
颱風對我國港埠威脅之分析與管理策略
8.
救護模式對院前心肺功能停止病患急救存活率之影響--以高雄市為例
9.
ISO9001風險管理實務研究
10.
維護國家公務機密失效風險評估之研究
11.
「一帶一路」倡議風險管理初探
12.
應用全因子實驗與克利金法改善差分進化算法解車輛途程問題之研究
13.
群眾科學:一個探索性的研究
14.
不當督導與員工建言行為:建言效能的中介與政治技能的調節效果
15.
Option Hedging Pressure Effect on Order Revision in the Futures Market
QR Code