:::

詳目顯示

回上一頁
題名:二維品質模式分類方法與評價應用之探討
作者:鄧肖琳
作者(外文):HSIAO_LIN TENG
校院名稱:中華大學
系所名稱:科技管理學系(所)
指導教授:李友錚
學位類別:博士
出版日期:2008
主題關鍵詞:二維品質模式分段迴歸分析區別分析李克特量表Kano’s modelPiecewise regressionDiscriminant analysisLikert scale
原始連結:連回原系統網址new window
相關次數:
  • 被引用次數被引用次數:期刊(0) 博士論文(1) 專書(0) 專書論文(0)
  • 排除自我引用排除自我引用:0
  • 共同引用共同引用:0
  • 點閱點閱:41
傳統上運用Kano二維品質模式進行品質屬性分類是依作者提出之評估表的建議來做決策,但已有許多學者提出以此評估表進行之一些缺點,並提出一些新的方法加以改善。但這些方法多仍是從操作的有效性之角度來衡量,而並未充份呈現品質屬性與顧客滿意之非線性關係,恐可推論其有一維品質被低估,而魅力品質、必須品質、反向品質與無差異品質則高估之可能。本研究以多變量分析提出兩個Kano模式屬性分類之新方法,首先以專家會議與區別分析建立四品質屬性區別模式,再求取各品質要素在各群體之區別分數,以區別分數高低來做為分類之依據。經實例之驗證,比較此方所得到之分類結果與傳統方法之差異性,發現此方確實具可行性與有效性。其次,提出以分段迴歸分析建立來納入更貼近原始Kano模式對各品質屬性在品質績效與滿意度之非線性概念。經實證驗證,此結合統計與繪圖技巧的方式可取代原Kano的評估表。最後,為說明各品質屬性績效與滿意度之不同非線性關聯,結合Tan and Shen’s (2000)與Matzler and Hinterhuber’s (1998)之概念,提出新的評估應用,本研究將基於二維品質模式將李克特5與7尺度量表之測量尺度予以修正。最後並以實證比較新方法與傳統處理所得結果之差異。
Quality attribute classification by applying Kano’s model is determined by evaluation table of author, however, a few scholars has pointed out weakness of proceeding the evaluation table and propose new methods to revise. Most of these methods are measured from the perspective of operational validity which does not sufficiently reflect the non-linear relationship between quality attribute and customer satisfaction. Therefore, one-dimensional quality may be under estimated while attractive quality, must-be quality, reverse quality and indifferent quality may be over estimated. This paper conducts multivariate analysis to propose new method for two attribute classification in Kano’s model. Firstly, expertise meeting and discriminant analysis will build up four quality attributes discriminant function and then to obtain discriminant score of each quality factor in each group. The classification will base upon the score sequence for discrimination. Within the test in case study, it will compare the classification result of this method and difference of traditional method. As a consequence, the result indicates that the new method is practical and has its validity. Secondly, piecewise regression analysis will be set up to meet the non-linear conceptual work of quality performance and satisfaction in Kano’s model. The result of test shows that the combination of statistic and graph technique will replace original Kano’s evaluation table. Consequently, combination of Tan and Shen (2000) and Matzler and Hinterhuber (1998) will illustrate the non-linear relationship in each quality attribute performance and satisfaction which propose new evaluations’ calculation conform from Kano’s model, to modify the scale value on options to 5-points or 7-points Likert scale and duly illustrate it. As a consequence, the case study will be undertaken to compare the result diversity of new method and traditional method.
Anderson, E. W., & Mittal, V. (2000). Strengthening the satisfaction– profit chain. Journal of Service Research, 3(2), 107-120.
Anderson, E. W., & Sullivan, M. W. (1993). The Antecedents and Consequences of Customer Satisfaction for Firms. Marketing Science, 12(2), 125-143.
Berger, C., Blauth, R., Boger, D., Bolster, C., Burchill, G., DuMouchel, W., et al. (1993). Kano’s Methods for Understanding Customer-defined Quality. Center for Quality Management Journal, 2(4), 3-36.
Bhattacharyya, S. K., & Rahman, Z. (2004). Capturing the customer’s voice, the centrepiece of strategy making: A case study in banking. European Business Review, 16(2), 128-138.
Brandt, D. R. (1988). How service marketers can identify value-enhancing service elements. The Journal of Services Marketing, 2(3), 35-41.
Chang, K. (1997). Dimensions and indicators of patients’ perceived nursing care quality in the hospital setting. Journal of nursing care quality, 11(6), 26-37.
Chien, T. K. (2007). Using the learning satisfaction improving model to enhance the teaching quality. Quality Assurance in Education, 15(2), 192-214.
Chou, S. M., Chen, T. F., Woodard, B., & Yen, M. F. (2005). Using SERVQUAL to evaluate quality disconfirmation of nursing service in Taiwan. The Journal of Nursing Research, 13(2), 75-83.
Cooper, D. R., & Emory, C. W. (1995). Business Research Method, Orlando, FL: Dryden.
Coulthard, L. M. (2004). Measuring Service Quality: A Review and Critique of Research Using SERVQUAL. International Journal of Market Research, 46(4), 479-497.
Coyle, J. (1999). Exploring the Meaning of Dissatisfaction with Health Care: The Importance of 'Personal Identity Threat'. Sociology of Health and Illness, 21(1), 95-124.
Coyne, K. (1989). Beyond service fads - Meaningful strategies for the real world. Sloan Management Review, 39(4), 69-76.
Erto, P., & Vanacore, A. (2000). A probabilistic approach to measure service quality. Proceedings of the 3rd International Conference on Building People and Organizational Excellence, Aarhus.
Erto, P., & Vanacore, A. (2002). A probabilistic approach to measure hotel service quality. Total Quality Management, 13(2), 165- 174.
Fornell, C. (1996). The American Customer Satisfaction Index: Nature, Purpose, and Findings. Journal of Marketing, 60(4), 7-18.
Fundin, A., & Nilsson, L. (2003). Using Kano’s theory of attractive quality to better understand customer satisfaction with e-services. Asian Journal on Quality, 4(2), 32-49.
Fung, D., & Cohen, M. M. (1998). Measuring patient satisfaction with anaesthesia care: A review of current methodology. Anaesthesia and Analgesia, 87(5), 1089-1098.
Fuller , J., & Matzler, K. (2007). Virtual product experience and customer articipation - A chance for customer-centred, really new products. Technovation, 27(6-7), 378–387
Gerrard, P., & Cunningham, J. B. (2000). Gazetted hotels in Singapore: A banking study. International Journal of Bank Marketing, 18(3), 135-147.
Griffin, A., & Hauser, J. R. (1993). The voice of the customer. Marketing Science, 12(1), 1-27.
Han, C. H., Connolly, P. M., & Canham, D. (2003). Measuring patient satisfaction as an outcome of nursing care at a teaching hospital of southern Taiwan. Journal of nursing care quality, 18(2), 143-150.
Herzberg, F., Mausner, B., & Snyderman, B. B. (1959). The Motivation to Work. New York: Wiley.
Hiidenhovi, H., Nojonen, K., & Laippala, P. (2002). Measurement of outpatients’ views of service quality in a Finnish university hospital. Journal of Advanced Nursing, 38(1), 59-67.
Hudson, D. J. (1966). Fitting segmented curves whose join points have to be estimated. Journal of the American Statistical Assoclation, 61(316), 1097-1129.
Jacobi, C. E., Triemstra, M., Rupp, I., Dinant, H. J., & Van Den Bos, G. A. M. (2004). Health care utilization among rheumatoid arthritis patients referred to a rheumatology center: Unequal needs, unequal care? Arthritis Care and Research, 45(4), 324-330.
Jané, A. C., & Domínguez, S. M. (2003). Citizens’ role in health services: Satisfaction behavior: Kano’s model, Part 2. Quality Management in Health Care, 12(1). 72-80.
Johnston, R. (1995). The determinants of service quality: Satisfiers and dissatisfiers. International Journal of Service Industry Management, 6(5), 53-71.
Joiner, B. L. (1996). Fourth Generation Management: The New Business Consciousness. New York: McGraw-Hill.
Kaneko, T. (2005). Must-be Quality and Attractive Quality: How to Identify Them Statistically. The 3rd ANQ Congress and the 19th Asia Quality Symposium, 750-756.
Kano, N., Seraku, N., Takahashi, F., & Tsuji, S. (1984). Attractive quality and must-be quality. The Journal of the Japanese Society for Quality Control, 14(2), 39-48.
Kano, N. (2003, April). Successful business strategies in changing age: Attractive quality and its creation. Paper presented at the CSSS: Attractive Quality and Six Sigma Seminar, Taipei.
Kuo, Y. F. (2004). Integrating Kano’s Model into Web-community Service Quality. Total Quality Management, 15(17), 925-939.
Lee, M. C., & Newcomb, J. F. (1997). Applying the Kano methodology to meet customer requirements: NASA’s microgravity science program. Quality Management Journal, 4(3), 95-106.
Lee, T. R., & Li, J. M. (2006). Key factors in forming an e-marketplace: An empirical analysis. Electronic Commerce Research and Applications, 5(2).105–116.
Lee, W. I. (2007). The relationship between quality of healthcare service and customer satisfaction - An example of hospitals in Taiwan. Journal of the Chinese Institute of Industrial Engineers, 24(1), 81-95.
Llosa, S. (1997). Analysis of the contribution of the elements of the service to satisfaction: A model tetra-class, Decisions Marketing, 10, 81-88.
Matzler, K., Fuchs, M., & Schubert, A. K. (2004). Employee Satisfaction: Does Kano’s Model Apply? Total Quality Management, 15(9-10), 1179-1198.
Matzler, K., Hinterhuber, H. H., Bailom, F., & Sauerwein, E. (1996). How to Delight Your Customer. Journal of Product and Brand Management, 5(2), 6-18.
Matzler, K., & Hinterhuber, H. H. (1998). How to Make Product Development Projects More Successful by Integrating Kano’s Model of Customer Satisfaction into Quality Function Deployment. Technovation, 18(1), 25-38.
McGee, V. E., & Carleton, W. T. (1970). Piecewise Regression. Journal of the American Statistical Association, 65(331), 1109-1124.
Mittal, V., Ross, W. T., & Baldasare, P. M. (1998). The asymmetric impact of negative and positive attribute-level performance on overall satisfaction and repurchase intentions. Journal of Marketing, 62(1), 33-47.
Miyakawa, M., & Wong, C. K. (1989). Analysis of attractive quality and must-be quality through product expectation factors. Proceedings of 35th Technical Conference, Tokyo: Japan Society for Quality Control, 101-104.
Nilson-Witell, L., & Fundin, A. (2005). Dynamics of service attributes: A test of Kano’s theory of attractive quality. International Journal of Service Industry Management, 16(2), 152-168.new window
Nunnally, J. (1978). Psychometric Theory, 2nd Editon. New York: McGraw-Hill.
Oliva, T. A., Oliver, R. L., and Bearden W. O. (1995). The Relationship Among Consumer Satisfaction, Involvement, and Product Performance. Behavioral Science, 40(2), 104-132.
Oliver, R. L. (1993). Cognitive, affective, and attribute bases of the satisfaction response. Journal of Consumer esearch, 20(3), 418-430.
Oliver, R. L., Rust, R. T., & Varki, S.(1997). Customer delight: Foundation, findings, and managerial insight. Journal of Retailing, 73(3), 311-336.
Rao, S. S., Ragu-Nathan, T. S., & Solis, L. E. (1997). Does ISO 9000 have an effect on quality management practices? An international empirical study. Total Quality Management, 8(6), 335-346.
Rubin, H. R., Ware, J. E., Nelson, E. C., & Meterko, M. (1990). The patient judgments of hospital quality (PJHQ) questionnaire. Medical Care, 28(9), 17-18.
Sa Moura, P., & Saraiva, P. (2001). The development of an ideal kindergarten through concept engineering/quality function deployment, Total Quality Management, 12(3), 365-372.
Schvaneveldt, S. J., Enkawa, T., & Miyakawa, M. (1991). Consumer Evaluation Perspective of Service Quality: Evaluation Factors and Two-Way Model of Quality. Total Quality Management, 2(2), 149-161.
Shahin, A. (2004). Integration of FMEA and the Kano Model: An Exploratory Examination. International Journal of Quality & Reliability Management, 21(7), 731-746.
Stone, V. I., Bauer, S. M., Montgomery, M. E., & Usiak, D. J. (2007). Uncovering promising management practices from national centers for independent living. Journal of Vocational Rehabilitation, 26(3), 159–173.
Tan, K. C., & Shen, X. X. (2000). Integrating Kano’s model in the planning matrix of quality function deployment. Total Quality Management, 11(8), 1141-1151.
Tan, K. C., Xie, M., & Shen, X. (1999). Development of innovative products using Kano’s model and quality function deployment. International Journal of Innovation Management, 3(3), 271-286.
Ting, S. C., & Chen, C. N. (2002). The Asymmetrical and Non-linear Effects of Store Quality Attributes on Customer Satisfaction. Total Quality Management, 13(4), 547-569.
Tishler, A., & Zang, I. (1981). A Maximum Likelihood Method for Piecewise Regression Models with a Continuous Dependent Variable. Journal of the Royal Statistical Society: Series C (Applied Statistics), 30(2), 116-124.
Tontini, G. (2000). Identification of Customer Attractive and Must-be Requirements Using a Modified Kano’s Method: Guidelines and Case Study. Proceeding of the 54th American Quality Congress, 728-734.
Tontini, G. (2003). Deployment of customer needs in the QFD using a modified Kano Model. Journal of the Academy of Business and Economics, March.
Venkitaraman, R. K., & Jaworski, C. (1993). Restructuring customer satisfaction measurement for better resource allocation decisions: an integrated approach. Fourth Annual Advanced Research Techniques Forum of the American Marketing Association, June 15.
Watson, G. H. (2003). Six Sigma and Related Studies in the Quality Disciplines, Milwaukee, WI: ASQ Quality Press.
Yu, Y. T. & Dean, A. (2001). The contribution of emotional satisfaction to cosumer loyalty. International Journal of Service Industry Management, 12(3), 234-250.
 
 
 
 
第一頁 上一頁 下一頁 最後一頁 top
:::
無相關期刊論文
 
無相關書籍
 
無相關著作
 
無相關點閱
 
QR Code
QRCODE