:::

詳目顯示

回上一頁
題名:整合元件製造商演進至輕資產商業模式之效率分析
作者:溫宏卿
作者(外文):Wen, Hung-Ching
校院名稱:國立交通大學
系所名稱:管理科學系所
指導教授:黃仁宏
學位類別:博士
出版日期:2012
主題關鍵詞:資料包絡分析整合元件製造商輕資產純製造外包營運效率半導體產業data envelopment analysisintegrated device manufacturerasset-lightpure manufacturing outsourcingoperating efficiencysemiconductor industry
原始連結:連回原系統網址new window
相關次數:
  • 被引用次數被引用次數:期刊(0) 博士論文(0) 專書(0) 專書論文(0)
  • 排除自我引用排除自我引用:0
  • 共同引用共同引用:0
  • 點閱點閱:25
一九九○至二○一○的二十年間,日本企業在整體半導體市場的市佔率從百分之四十六大幅下滑至百分之二十,而美國晶片生產商的市佔率從百分之三十九上升至百分之五十,亞太地區晶片製造商的市佔率從百分之四持續上升至亮眼的百分之二十一。在此同時,世界各地有許多半導體企業將其商業模式不斷地演進,而此種演進能幫助企業達到改善營運績效及提昇市佔率的目標。對這些企業而言,瞭解所選擇的商業模式是如何影響企業的持續競爭優勢是非常重要的。因此,本研究運用無母數效率前緣的資料包絡分析法,針對五十家半導體領先廠商進行不同商業模式與營運效率間關係之探討。資料包絡分析是一種廣泛使用的方法用來衡量決策單位同儕間的效率。本文建構一個由四項輸入及一項輸出變數組成的資料包絡分析方法,就二十三家整合元件製造商及二十七家純製造外包企業提供整體績效的指標。研究指出,在競爭激烈的半導體產業,當資本投資上揚的同時,越來越多的整合元件製造商與合約代工企業結合成合作夥伴,向輕資產或純製造外包的商業模式邁進,而這種商業模式的轉變能讓整合元件製造商受益於經營績效與效率的提昇。研究結果簡述如下。首先,純製造外包企業平均而言比整合元件製造商更有效率,同時在銷貨成本及總資產的管理方面也比整合元件製造商表現更佳。第二,許多整合元件製造商透過停止生產設施的擴張以及外包服務比率的提高來達到績效提昇的目的,同時也縮短了與純製造外包企業的效率差距。第三,整合元件製造商泰半是在資源輸入項加倍而輸出項未達到雙倍的狀態下營運,採取輕資產或純製造外包的商業模式,能讓整合元件製造商的資源做有效的分配,並協助企業提昇競爭效率。最後,整合元件製造商在減少總資產及銷售暨一般管理費用的浪費上仍有很大空間,同時純製造外包企業在研究發展費用及銷售暨一般管理費用項目上顯現較大的投入差額值。這些低效率企業的非零投入差額值可以提供給所有半導體企業一個方向,重新組合自身的資源並提出一些可行的效率改善方案。資料包絡分析法能更加準確的分析企業效率低落的來源以及企業有哪些薄弱的環節,如此,企業可作出相對應的努力來提昇績效。成功的整合元件製造商所採取的卓越商業模式可做為其他企業的標竿,這種重新聚焦在核心競爭力的作法能讓企業再度成長。
Over the two decades 1990-2010, Japanese companies’ overall share of the semiconductor market dropped sharply from 46 to just 20 percent, while the US chip producers’ share increased from 39 to 50 percent and Asia Pacific chip makers continued to increase their dominant share from 4 to 21 percent. During this period, the business models of many semiconductor companies around the world evolved to help them achieve their goals of improving operating performance and gaining market share. It is important for semiconductor companies to understand how the business models they adopted affected their companies’ sustainable competitive advantages. In this study, the operating efficiencies of fifty leading semiconductor companies were explored using a non-parametric efficient frontier method − data envelopment analysis (DEA). DEA is a widely used method for measuring the efficiency of peer decision making units (DMUs). A DEA model consisting of four input variables and one output variable was built to provide an overall performance index considering twenty-three semiconductor integrated device manufacturers (IDMs) and twenty-seven pure manufacturing outsourcing (PMO) companies. The analysis showed that as capital investment rose in the competitive semiconductor industry, more and more IDMs have benefited from partnering with contract foundry companies and moving toward a business model based on asset-light or PMO, resulting in better operating performance and efficiency. Research findings can be briefly summarized as follows. First, PMO companies are more efficient on average than IDMs. They manage their cost of goods sold (COGS) and total assets better than IDMs. Second, many IDMs substantially improved their performance and narrowed the gap with PMO companies by halting manufacturing facilities expansion and beginning to rely more on outsourcing services for semiconductor manufacturing. Third, IDMs tend to operate at doubling input less than doubles output. Asset-light or PMO business model adoption could provide IDMs a better resource allocation and help them to improve competitive efficiency. Finally, IDM companies still have more room to reduce the waste of total assets and selling, general and administrative (SG&A) expenses, and PMO companies have large input slacks of research and development (R&D) expenses and SG&A expenses. Non-zero input slacks for inefficient companies can give IDM and PMO companies a direction to reorganize their resources and provide some feasible alternatives. DEA could identify the source that causes the inefficiency more accurately and provided the detection of the weak areas so that appropriate effort can be made to improve performance. The superior business models adopted by more successful IDMs could be benchmarks for other firms to refocus on their core competences and hence rose again.
Asmild, M., Paradi, J.C., Aggarwall, V. and Schaffnit, C. (2004) 'Combining DEA window analysis with the Malmquist index approach in a study of the Canadian banking industry', Journal of Productivity Analysis 21(1): 67-89.
Banker, R.D., Charnes, A. and Cooper, W.W. (1984) 'Some models for estimating technical and scale inefficiencies in data envelopment analysis', Management Science 30(9): 1078-1092.
Bannick, R.R. and Ozcan, Y.A. (1995) 'Efficiency analysis of federally funded hospitals: Comparison of DoD and VA hospitals using data envelopment analysis', Health Services Management Research 8(2): 73-85.
Carbone, T.A. (2000) 'Measuring efficiency of semiconductor manufacturing operations using data envelopment analysis (DEA)', in Proceedings 2000 IEEE/SEMI Advanced Semiconductor Manufacturing Conference, 56-62.
Chakravarthy, B.S. (1986) 'Measuring strategic performance', Strategic Management Journal 7(5): 437-458.
Charnes, A., Clark, C.T., Cooper, W.W. and Golany, B. (1984) 'A development study of data envelopment analysis in measuring the efficiency of maintenance units in the US air forces', Annals of Operations Research 2(1): 95-112.
Charnes, A., Cooper, W.W., Lewin, A.Y. and Seiford, L.M. (1994) Data Envelopment Analysis: Theory, Methodology and Applications. Boston: Kluwer Academic.
Charnes, A., Cooper, W.W. and Rhodes, E. (1978) 'Measuring the efficiency of decision making units', European Journal of Operational Research 2(6): 429-444.
Chen, C.J. and Yeh, Q.J. (2005) 'A comparative performance evaluation of Taiwan’s high-tech industries', International Journal of Business Performance Management 7(1): 444-449.
Chen, C.T., Chien, C.F., Lin, M.H. and Wang, J.T. (2004) 'Using DEA to evaluate R&D performance of the computers and peripherals firms in Taiwan', International Journal of Business 9(4): 347-359.
Chen, T.Y. and Chen, L.H. (2007) 'DEA performance evaluation based on BSC indicators incorporated: The case of semiconductor industry', International Journal of Productivity and Performance Management 56(4): 335-357.
Chen, W.C. and Chien, C.F. (2011) 'Measuring relative performance of wafer fabrication operations: A case study', Journal of Intelligent Manufacturing 22(3): 447-457.
Chen, Y. and Ali, A.I. (2004) 'DEA Malmquist productivity measure: New insights with an application to computer industry', European Journal of Operational Research 159(1): 239-249.
Chen, Y.S. and Chen, B.Y. (2009) 'Using data envelopment analysis (DEA) to evaluate the operational performance of the wafer fabrication industry in Taiwan', Journal of Manufacturing Technology Management 20(4): 475-488.
Chien, C.F., Lo, F.Y. and Lin, J.T. (2003) 'Using DEA to measure the relative efficiency of the service center and improve operation efficiency through reorganization', IEEE Transactions on Power Systems 18(1): 366-373.
Cooper, W.W., Seiford, L.M. and Tone, K. (2006) Introduction to Data Envelopment Analysis and Its Uses: With DEA-Solver Software and References. New York: Springer.
Cooper, W.W., Seiford, L.M. and Zhu, J. (2000) 'A unified additive model approach for evaluating inefficiency and congestion with associated measures in DEA', Socio-Economic Planning Sciences 34(1): 1-25.
Cullinane, K., Wang, T., Song, D. and Ji, P. (2006) 'The technical efficiency of container ports: Comparing data envelopment analysis and stochastic frontier analysis', Transportation Research Part A 40(4): 354-374.
Dyson, R.G., Allen, R., Camanho, A.S., Podinovski, V.V., Sarrico, C.S. and Shale, E.A. (2001) 'Pitfalls and protocols in DEA', European Journal of Operational Research 132(2): 245-259.
Epstein, M.K. and Henderson, J.C. (1989) 'Data envelopment analysis for managerial control and diagnosis', Decision Sciences 20(1): 90-119.
Färe, R., Grosskopf, S. and Lovell, C.A.K. (1994) Production Frontiers. Cambridge: Cambridge University Press.
Farrell, M.J. (1957) 'The measurement of productive efficiency', Journal of the Royal Statistical Society, Series A 120(3): 253-290.
Gartner (2011) Gartner, Inc. database, http://my.gartner.com/, accessed 20 June 2011.
Golany, B. and Roll, Y. (1989) 'An application procedure for DEA', Omega, International Journal of Management Science 17(3): 237-250.
Golany, B. and Roll, Y. (1997) 'Incorporating standards via DEA', in: A. Charnes, W.W. Cooper, A.Y. Lewin and L.M. Seiford (Eds.) Data Envelopment Analysis: Theory, Methodology and Applications, Massachusetts: Kluwer Academic.
Hughes, P.A.N. and Edwards, M.E. (2000) 'Leviathan vs. Lilliputian: A data envelopment analysis of government efficiency', Journal of Regional Science 40(4): 649-669.
IRI (2010) 'The 2010 EU Industrial R&D Investment Scoreboard', economics of Industrial Research & Innovation, http://iri.jrc.ec.europa.eu/research/docs/2010/SB2010_final_report.pdf, accessed 10 March, 2011.
Kozmetsky, G. and Yue, P. (1998) 'Comparative performance of global semiconductor companies', Omega, International Journal of Management Science 26(2): 153-175.
Ku, K.C., Kao, H.P. and Gurumurthy, C.K. (2007) 'Virtual inter-firm collaborative framework − An IC foundry merger/acquisition project', Technovation 27(6-7): 388-401.
Kumar, R. (2008) Fabless Semiconductor Implementation. New York: McGraw Hill.
Lai, Y.H. (2007) 'Use of data envelopment analysis to access the relative efficiency of laptop computer manufacturers: An empirical study', International Journal of Management 24(2): 289-296.
Leachman, R.C., Ding, S. and Chien, C.F. (2007) 'Economic efficiency analysis of wafer fabrication', IEEE Transactions on Automation Science and Engineering 40(4): 501-512.
Leachman, R.C. and Hodges, D.A. (1996) 'Benchmarking semiconductor manufacturing', IEEE Transactions on Semiconductor Manufacturing 9(2): 158-169.
Lewin, A.Y., Morey, R.C. and Cook, T.J. (1982) 'Evaluating the administrative efficiency of courts', OMEGA 10(4): 401-411.
Lineback, R., McClean, B., Matas, B. and Yancey, T. (2011) 'The McCLEAN Report 2011 Edition', IC Insights, Inc. report, 29 July, http://www.icinsights.com/reports/mcclean-report/, accessed 29 July 2011.
Lineback, R., McClean, B., Matas, B. and Yancey, T. (2012) 'The McCLEAN Report 2012 Edition', IC Insights, Inc. report, 5 February, http://www.icinsights.com/reports/mcclean-report/, accessed 5 February 2012.
Liu, F.H. and Wang, P.H. (2008) 'DEA Malmquist productivity measure: Taiwanese semiconductor companies', International Journal of Production Economics 112(1): 367-379.
Lo, F.Y., Chien, C.F. and Lin, J.T. (2001) 'A DEA study to evaluate the relative efficiency and investigate the district reorganization of the Taiwan power company', IEEE Transactions on Power Systems 16(1): 170-178.
Lu, W.M. and Hung, S.W. (2010) 'Assessing the performance of a vertically disintegrated chain by the DEA approach − a case study of Taiwanese semiconductor firms', International Journal of Production Research 48(4): 1155-1170.
McGregor, J. (2007) 'The Common Platform technology: A new model for semiconductor manufacturing', In-Stat, LLC. report, 5 January, http://www.commonplatform.com/newsroom/ar/Instat_Common%20Platform%20Report_IN0703405WHT_¬1Q07.pdf, accessed 5 January 2007.
Parsons, L. (1992) 'Productivity versus Relative Efficiency in Marketing: Past and Future?', in: G. Lilien, G. Laurent and B. Pras (Eds.) Research Traditions in Marketing, Amsterdam: Kluwer Academic, pp. 169-196.
Podinovski, V.V. (2004) 'Production trade-offs and weight restrictions in data envelopment analysis', Journal of the Operational Research Society 55(12): 1311-1322.
Raab, R.L. and Lichty, R.W. (2002) 'Identifying sub-areas that comprise a greater metropolitan area: The criterion of county relative efficiency', Journal of Regional Science 42(3): 579-594.
Sarrico, C.S., Hogan, S.M., Dyson, R.G. and Athanassopoulos, A.D. (1997) 'Data envelopment analysis and university selection', Journal of the Operational Research Society 48(12): 1163-1177.
Seiford, L.M. (1997) 'A bibliography for data envelopment analysis (1978-1996)', Annals of Operations Research 73(0): 393-438.
Seiford, L.M. and Zhu, J. (1999) 'Profitability and marketability of the top 55 US commercial banks', Management Science 45(9): 1270-1288.
Sengupta, J.K. (2005) 'Non-parametric efficiency analysis under uncertainty using data envelopment analysis', International Journal of Production Economics 95(1): 39-49.
Tang, Y.C. and Liou, F.M. (2010) 'Does firm performance reveal its own causes? The role of Bayesian inference', Strategic Management Journal 31(1): 39-57.
Thanassoulis, E. and Allen, R. (1998) 'Simulating weights restrictions in data envelopment analysis by means of unobserved DMUs', Management Science 44(4): 586-594.
Thore, S., Phillips, F., Ruefli, T.W. and Yue, P. (1996) 'DEA and the management of the product cycle: The US computer industry', Computers & Operations Research 23(4): 341-356.
Vajpayee, B. and Dhasmana, V. (2011) 'Standoff: Gunning for returns', Thomson Reuters report, 13 January, http://www.thomsonone.com, accessed 13 January 2011.
Wu, D.D. and Ho, C.B. (2007) 'Productivity and efficiency analysis of Taiwan’s integrated circuit industry', International Journal of Productivity and Performance Management 56(8): 715-730.
Zhu, J. and Shen, Z.H. (1995) 'A discussion of testing DMUs’ returns to scale', European Journal of Operational Research 81(3): 590-596.

 
 
 
 
第一頁 上一頁 下一頁 最後一頁 top
QR Code
QRCODE