產品彈性能力決定因素之實證研究__臺灣人文及社會科學引文索引資料庫

:::

詳目顯示

第 1 筆 / 總合 1 筆

/1頁

來源文獻資料
摘要
外文摘要
引文資料

題名：	產品彈性能力決定因素之實證研究
書刊名：	管理評論
作者：	張世佳／林能白
作者(外文)：	Chang, Shih-chia／Lin, Neng-pai
出版日期：	2001
卷期：	20:1
頁次：	頁99-127
主題關鍵詞：	產品範疇彈性；產品機動彈性；產品一致彈性；產品彈性能力；Product range flexibility；Product mobility flexibility；Product uniformity flexibility；Product flexibility capability
原始連結：	連回原系統網址
相關次數：	被引用次數:期刊(0) 博士論文(0) 專書(0) 專書論文(0) 排除自我引用:0 共同引用:0 點閱:12

在面對顧客對產品需求之不確定性、產品生命週期快速縮短的市場環境下，積極提昇產品彈性能力，已成為廠商迅速反應市場變動的重要策略之一；基於產品彈性能力對市場競爭優勢具關鍵影響性，因此廠商如何正確地從事製造系統之投資或管理活動之投入，以強化其產品彈性能力，係決策者目前面臨之重要課題；本研究將產品彈性能力，區分為三種不同類型：產品範疇彈性、產品機動彈性及產品一致彈性，並探討該三種產品彈性類型之決定因素，以作為廠商提昇或發展產品彈性能力之決策依據；本研究以國內54家主機板廠商之資料，利用複迥歸模式進行實證分析，研究結果如下：1．可程式化生產設備使用程度、員工技能多樣化程度及良好供應商關係對產品範疇彈性具顯著正面影響作用；2．可程式化生產設備使用程度、良好供應商關係及零件共用程度對產品機動彈性具顯著正面影響作用；3．零件共用程度對產品一致彈性具顯著正面影響作用。

以文找文

In the environment of uncertain product demand and short product life cycle, increasing product flexibility capability is a critical issue for firms to improve market responsiveness. Production managers have to decide on how to adequately invest in manufacturing systems in order to enhance product flexibility capability. This research use multiple regression model to analyze the determinants of product flexibility capability based on the data collected from 54 mother board manufacturing firms. Product flexibility capability was divided into three distinct types named product range, product mobility and product uniformity flexibility. Our findings are as follows: 1.the degree of using programmable equipment, multi-skill employee and close supplier relationship are significantly positive associated with product range flexibility; 2.the degree of using programmable equipment, close supplier relationship and the degree of part commonality are significantly positive associated with product mobility flexibility; 3.the degree of part commonality are significantly positive associated with product uniformity flexibility.

以文找文

期刊論文
1.	Azzone, G.、Bertele, U.(1989)。Measuring the Economic Effectiveness of Flexible Automation: A New Approach。International Journal of Production Research，27(5)，735-746。
2.	Boyer, K. K.、Leong, G. K.(1996)。Manufacturing flexibility at the plant level。Omega: International Journal of Management Science，24(5)，495-510。
3.	Loch, Christoph、Stein, Lothar、Terwiesch, Christian(1996)。Measuring development performance in the electronics industry。Journal of Product Innovation Management，13(1)，3-20。
4.	Liker, J. K.、Collins, P. D.、Hull, F. M.(1999)。Flexibility and Standardization: Test of a Contingency Model of Product Design-Manufacturing Integration。Journal of Product Innovation Management，16(3)，248-267。
5.	De Toni, A.、Tonchia, S.(1998)。Manufacturing flexibility: A literature review。International Journal of Production Research，36(6)，1587-1617。
6.	Swamidass, P. M.、Newell, W. T.(1987)。Manufacturing strategy, environmental uncertainty and performance: a path analytic model。Management Science，33(4)，509-524。
7.	Juran, J. M.(1978)。Japanese and Western Quality--A Contrast。Quality Progress，11(12)，10-18。
8.	Chen, I. J.、Calantone, R. J.、Chung, C. H.(1992)。The Marketing-Manufacturing Interface and Manufacturing Flexibility。Omega: The International Journal of Management Science，20(4)，431-443。
9.	Gerwin, D.(1987)。An agenda for research on the flexibility of manufacturing processes。International Journal of Operations and Production Management，7(1)，38-49。
10.	He, D. W.、Kusiak, A.(1996)。Performance Analysis of Modular Products。International Journal of Production Research，34(1)，253-272。
11.	Suarez, F. F.、Cusumano, M. A.、Fine, C. H.(1996)。An empirical study of manufacturing flexibility in printed circuit board assembly。Operations Research，44(1)，223-240。
12.	Upton, D. M.(1997)。Process Range in Manufacturing: An Empirical Study of Flexibility。Management Science，43(8)，1079-1092。
13.	Gupta, Y. P.、Somers, T. M.(1992)。The Measurement of Manufacturing Flexibility。European Journal of Operational Research，60(2)，166-182。
14.	Cox, T. Jr.(1989)。Toward the Measurement of Manufacturing Flexibility。Production and Inventory Management Journal，30(1)，68-72。
15.	Neeley, S. M.、Song, X. Michael、Zhao, Yushan(1996)。Managing R&D--Marketing Integration in the New Product Development Process。Industrial Marketing Management，25，545-556。
16.	Flynn, Barbara B.、Schroeder, Roger G.、Sakakibara, Sadao(1995)。The impact of quality management practices on performance and competitive advantage。Decision Sciences，26(5)，659-691。
17.	De Meyer, A.、Nakane, J.、Miller, J. G.、Ferdows, K.(1989)。Flexibility: The Next Competitive Battle The Manufacturing Futures Survey。Strategic Management Journal，10(2)，135-144。
18.	Kotha, S.(1995)。Mass Customization: Implementing The Emerging Paradigm for Competitive Advantage。Strategic Management Journal，16(1)，21-42。
19.	Upton, David M.(1994)。The Management of Manufacturing Flexibility。California Management Review，36(2)，72-89。
20.	Sethi, A. K.、Sethi, S. P.(1990)。Flexibility in manufacturing: A survey。International Journal of Flexible Manufacturing Systems，2(4)，289-328。
21.	Sanchez, Ron(1995)。Strategic flexibility in product competition。Strategic Management Journal，16(S1)，135-159。
22.	Upton, David M.(1995)。What Really Makes Factories Flexible?。Harvard Business Review，73(4)，74-84。
23.	Griffin, Abbie、Page, Albert L.(1993)。An interim report on measuring product development success and failure。Journal of Product Innovation Management，10(4)，291-308。
24.	Skinner, W.(1974)。The focused factory。Harvard Business Review，52(3)，113-121。
25.	Gerwin, Donald(1993)。Manufacturing Flexibility: A Strategic Perspective。Management Science，39(4)，395-410。
26.	Slack, N.(1987)。The flexibility of manufacturing systems。International Journal of Operations and Production Management，7(4)，35-45。
27.	Saraph, Jayant V.、Benson, P. George、Schroeder, Roger G.(1989)。An Instrument for Measuring the Critical Factors of Quality Management。Decision Sciences，20(4)，810-829。
28.	Garvin, David A.(1983)。Quality on the Line。Harvard Business Review，61(5)，64-75。
29.	Ettlie, J. E.、Penner-Hahn, J. D.(1994)。Flexibility Ratios and Manufacturing Strategy。Management Science，40(11)，1444-1454。
30.	Krafcik, J. F.(1988)。Triumph of the Lean Production System。Sloan Management Review，30(1)，41-52。
31.	Longowitz, N.(1991)。Business Competitive Through Design for Manufacturing。Industrial Management，4，29-31。
32.	Gerwin, D. A.(1989)。Manufacturing flexibility in the CAM era。Business Horizons，32(1)，78-84。
33.	Stoll, H. W.(1986)。Design for Manufacture: An Overview。Applied Mechanics Reviews，39(9)，1356-1364。
34.	Sethi, S. P.、Parthasarthy, R.(1992)。The Impact of Flexible Automation on Business Strategy and Organizational Structure。The Academy of Management Review，17，86-111。
35.	Tchijvon, I.、Ranta, J.(1990)。Economic and Success Factors of Flexible Manufacturing Systems: The Conventional Explanation Revisited。International Journal of Flexible Manufacturing Systems，2(3)，169-190。
36.	Macbeth, D. K.(1985)。The flexible Manufacturing Mission: Some Implication for Management。International Journal of Operations & Production Management，5(1)，26-31。
37.	Lim, S. H.(1987)。Flexibility Manufacturing Systems and Manufacturing Flexibility in the United Kingdom。International Journal of Operations & Production Management，7(6)，44-54。
38.	Jaikumar, R.(1986)。Post-Industrial Manufacturing。Harvard Business Review，64(6)，69-76。
39.	Feitzinger, E.、Lee, H. L.(1997)。Mass Customization at Hewlett-Packard: The Power of Postponement。Harvard Business Review，75(1)，116-121。
40.	Turco, F.、Bartezzaghi, E.(1989)。The Impact of Just-In-Time (JIT) on Production System Performance: An Analytical Framework。International Journal of Operations & Production Management，9(8)，40-62。
41.	McLachlin, R.(1997)。Management Initiatives and Just-in-time Manufacturing。Journal of Operations Management，15，271-292。
42.	Dean, James W., Jr.、Susman, G. I.(1989)。Organizing for Manufacturable Design。Harvard Business Review，67(1)，28-36。
43.	Pinto, J. K.、Pinto, M. B.(1990)。Project Team Communication and Cross-function Cooperation in New Product Development。Journal of Product Innovation Management，7，200-212。

學位論文
1.	Mandelbaum, M.(1978)。Flexibility in Decision Making: A Exploration and Unification，Toronto, Canada。

圖書
1.	Stalk, G. H.、Hout, T. M.(1990)。Competing Against Time: How Time-Based Competition Is Reshaping Global Markets。New York, NY：Free Press。
2.	Guieford, J. P.(1965)。Fundamental statistics in phychology and education。N.Y：McGramn-Hill。
3.	Kerlinger, F. N.(1986)。Foundations of Behavior Research。NY。
4.	Nanni, A. J. Jr.、Vollmann, T. E.、Dixon, J. R.(1990)。The New Performance Challenge: Measuring Operations for World-Class Competition。Homewood, IL：Business one IRWIN。
5.	Zikmund, W. G.(1991)。Business Research Method。Chicago：The Dryden Press。
6.	Kidd, Paul T.(1994)。Agile Manufacturing: Forging New Frontiers。Addison-Wesley。
7.	Ettlie, J. E.(1988)。Taking Charge of Manufacturing: how companies are combining technological and organizational innovations to compete successfully。Taking Charge of Manufacturing: how companies are combining technological and organizational innovations to compete successfully。San Francisco, CA。
8.	Buffa, E. S.(1984)。Meeting The Competitive Challenge: Manufacturing Strategy of US Companies。Meeting The Competitive Challenge: Manufacturing Strategy of US Companies。Homewood, IL。
9.	Cusumano, M. A.(1985)。The Japanese Automobile Industry: Technology and Management at Nissan and Toyota。The Japanese Automobile Industry: Technology and Management at Nissan and Toyota。Cambridge, MA。

推文
推薦
引用網址
引用嵌入語法
轉寄

top

:::

相關期刊
相關論文
相關專書
相關著作
熱門點閱

1.	品質管理活動與產品彈性能力關係之實證研究--以主機板製造業為例
2.	產品彈性能力與製造管理要素、事業績效關係之實證研究

無相關博士論文

無相關書籍

無相關著作

無相關點閱

QR Code

臺灣人文及社會科學引文索引資料庫系統

詳目顯示

臺灣人文及社會科學引文索引資料庫