資料載入處理中...
臺灣人文及社會科學引文索引資料庫系統
:::
網站導覽
國圖首頁
聯絡我們
操作說明
English
行動版
(18.224.62.118)
登入
字型:
**字體大小變更功能,需開啟瀏覽器的JAVASCRIPT,如您的瀏覽器不支援,
IE6請利用鍵盤按住ALT鍵 + V → X → (G)最大(L)較大(M)中(S)較小(A)小,來選擇適合您的文字大小,
如為IE7以上、Firefoxy或Chrome瀏覽器則可利用鍵盤 Ctrl + (+)放大 (-)縮小來改變字型大小。
來源文獻查詢
引文查詢
瀏覽查詢
作者權威檔
引用/點閱統計
我的研究室
資料庫說明
相關網站
來源文獻查詢
/
簡易查詢
/
查詢結果列表
/
詳目列表
:::
詳目顯示
第 1 筆 / 總合 1 筆
/1
頁
來源文獻資料
摘要
外文摘要
引文資料
題名:
Modified Economic Manufacturing Quantity Model for Product with Quality Loss under the Serial Production System and Rectifying Inspection Plan
書刊名:
品質學報
作者:
陳忠和
作者(外文):
Chen, Chung-ho
出版日期:
2010
卷期:
17:2
頁次:
頁99-113
主題關鍵詞:
經濟生產數量
;
選剔檢驗計劃
;
序列生產系統
;
製程平均數
;
規格界限
;
非對稱二次品質損失函數
;
Economic manufacturing quantity
;
EMQ
;
Rectifying inspection plan
;
Serial production system
;
Process mean
;
Specification limits
;
Asymmetric quadratic quality loss function
原始連結:
連回原系統網址
相關次數:
被引用次數:期刊(0) 博士論文(0) 專書(0) 專書論文(0)
排除自我引用:0
共同引用:0
點閱:18
摘 要 最佳製程平均數設定為現代統計製程管制一重要的方法用以決定品質水準,Al-Sultan 於 1994 年提出一單次抽樣計劃應用於兩部機器從事序列生產系統的最佳製程平均數設定問題。 然而,其模式並未考慮產品在規格界限內的品質損失,也未指出接受批中樣本所發現不良品 的處置方式,以及未進一步提出整合生產與品質的模式。本研究將進一步提出基於修正的 Al-Sultan 模式有k 部機器從事序列生產與產品具非對稱二次品質損失的修正EMQ 模式以獲 得每單位時間的最大平均總利潤。
以文找文
Abstract The optimum process mean setting is an important method of modern statistical process control for determining the quality level. In 1994, Al-Sultan presented a single sampling plan applied in determining the optimum process mean for two machines in a serial production system. However, he didn’t consider the quality cost for the product within the specification limits, pointed out that the non-conforming items in the sample of accepted lot is replaced or eliminated from the lot, and proposed an integrated model with production and quality. In this paper, the author proposes a modified economic manufacturing quantity (EMQ) model based on a modified Al-Sultan’s model with k machines in a serial production system and asymmetric quadratic quality loss function for obtaining the maximum expected total profit per unit of time.
以文找文
Other
1.
Chen, C. H. and Kao, H. S.(2009)。The determination of optimum process mean and screening limits based on quality loss function。
期刊論文
1.
Tahera, K.、Chan, W. M.、Ibrahim, R. N.(2008)。Joint determination of process mean and production run: A review。International Journal of Advanced Manufacturing Technology,39(3/4),388-400。
2.
Bowling, S. R.、Khasawneh, M. T.、Kaewkuekool, S.、Cho, B. R.(2004)。A Markovian approach to determining optimum process target levels for a multi-stage serial production system。European Journal of Operational Research,159,636-650。
3.
Chen, C. H.、Lai, M. T.(2007)。Economic manufacturing quantity, optimum process mean, and economic specification limits setting under the rectifying inspection plan。European Journal of Operational Research,183,336-344。
4.
Pulak, M. F. S.、Al-Sultan, K. S.(1996)。The Optimum Targeting for a Single Filling Operation with Rectifying Inspection。Omega: The International Journal of Management Science,24(6),727-733。
5.
Rahim, M. A.、Tuffaha, F.(2004)。Integrated model for determining the optimal initial settings of the process mean and optimal production run assuming quadratic loss functions。International Journal of Production Research,42(16),3281-3300。
圖書
1.
田口玄一(1986)。Introduction to Quality Engineering: Designing Quality into Products and Processes。Tokyo:Asian Productivity Organization。
其他
1.
Al-Sultan, K. S.(1994)。An algorithm for the determination of the optimum target values for two machines in series with quality sampling plans。
2.
Chen, C. H.(2006)。The modified Pulak and Al-Sultan's model for determining the optimum process parameters。
3.
Chen, C. H.(2007)。Modified economic manufacturing quantity model considering product under the serial production system。
4.
Chen, C. H.(2008)。Optimum production run length and warranty period setting for the imperfect production system。
5.
Chen, C. H.(2008)。The determination of economic production run length and manufacturing target by considering quality loss function。
6.
Chen, C. H.(2008)。Economic production run length and warranty period for product with Weibull lifetime。
7.
Chen, C. H. and Chen, J. C.(2008)。Optimum process mean setting based on bivariate quality loss function。
8.
Chen, C. H. and Khoo, M. B. C.(2008)。Joint determination of optimum process mean and economic specification limits for rectifying inspection plan with inspection error。
9.
Chen, C. H. and Lai, M. T.(2007)。Determining the optimum process mean based on quadratic quality loss function and rectifying inspection plan。
10.
Chen, S. L. and Chung, K. J.(1996)。Determining of the optimal production run and the most profitable process mean for a production process。
11.
Duffuaa, S. O. and Siddiqui, A.W.(2003)。Process targeting with multi-class screening and measurement error。
12.
Hariga, M. A. and Al-Fawzan, M. A.(2005)。Joint determination of target value and production run for a process with multiple markets。
13.
Kim, Y. J. and Cho, B. R.(2003)。Determining the optimum process mean for a skewed process。
14.
Lee, M. K., Kim, S. B., Kwon, H. M. and Hong, S. H.(2004)。Economic selection of mean value for a filling process under quadratic quality loss, International Journal of Reliability。
15.
Makis, V.(1998)。Optimal lot sizing and inspection policy for an EMQ model with imperfect inspections。
16.
Teeravaraprug, J.(2005)。Determining optimal process mean of two-market products。
推文
當script無法執行時可按︰
推文
推薦
當script無法執行時可按︰
推薦
引用網址
當script無法執行時可按︰
引用網址
引用嵌入語法
當script無法執行時可按︰
引用嵌入語法
轉寄
當script無法執行時可按︰
轉寄
top
:::
相關期刊
相關論文
相關專書
相關著作
熱門點閱
1.
The Determination of Optimum Process Mean for a One-Sided Specification Limit Product with Manufacturing Cost and Linear Quality Loss
2.
Joint Determination of Optimum Process Mean and Economic Specification Limits for Rectifying Inspection Plan with Inspection Error
3.
The Optimum Selection of Imperfect Quality Economic Manufacturing Quantity and Process Mean by Considering Quadratic Quality Loss Function
無相關博士論文
無相關書籍
無相關著作
無相關點閱
QR Code