:::

詳目顯示

回上一頁
題名:塑膠模具開發關鍵失效因素之分析與探討
書刊名:危機管理學刊
作者:洪僖黛曾全偉廖柏凱
作者(外文):Hung, H. T.Tzeng, C. W.Liao, P. K.
出版日期:2013
卷期:10:1
頁次:頁69-76
主題關鍵詞:塑膠模具失效模式與效應分析風險優先數Plastic injection modesFailure mode and effects analysisRisk priority number
原始連結:連回原系統網址new window
相關次數:
  • 被引用次數被引用次數:期刊(0) 博士論文(0) 專書(0) 專書論文(0)
  • 排除自我引用排除自我引用:0
  • 共同引用共同引用:3
  • 點閱點閱:39
本研究應用失效模式與效應分析的程序來探討塑膠模具在進行測試時,由於模具構造、塑膠材料、以及加工條件等因素而造成成型品的種種不良現象;並且藉由衡量失效模式的嚴重性、發生率、以及偵測度來決定風險優先數,並且進行失效模式的風險分級與排序,以做為模具開發人員降低塑膠模具失效風險,提高設計與開發成效的主要依據。
This study explores the failure modes of plastics products caused by the defects in mold structure, raw materials, or processing conditions during the tests with a method of the failure mode and effects analysis (FMEA) procedure. By evaluating the severity, the occurrence, and the detection of each failure mode, the risk priority numbers of failure modes are constructed. Then the ranks of all failure modes could be determined. And some preventive actions for decreasing the failure risks are suggested in this study.
期刊論文
1.Chin, K. S.、Wang, Y. M.、Poon, G. K. K.、Yang, J. B.(2009)。Failure mode and effects using a group-based evidential reasoning approach。Computers & Operations Research,36,1768-1799。  new window
學位論文
1.陳俊維(2004)。FMEA應用於提昇潔淨室H.V.A.C.系統可靠度之研究(碩士論文)。國立成功大學。  延伸查詢new window
2.孫國隆(2009)。應用資料包絡分析法於失效模式與效應分析以增強評估能力之研究(博士論文)。國立中央大學,桃園。new window  延伸查詢new window
3.高鳳如(2011)。整合QFD與FMEA方法於工業包裝設計研究--以TFT LCD模組為例(碩士論文)。國立成功大學。  延伸查詢new window
4.曾耀群(2009)。應用醫療照護之失效模式與效應分析於醫療流程之改善(碩士論文)。國立清華大學。  延伸查詢new window
5.黃建智(2011)。應用FMEA及模糊理論之薄膜太陽能模組認證失效分析(碩士論文)。國立成功大學。  延伸查詢new window
圖書
1.Ford Motor Company(1988)。Potential Failure Mode and Effects Analysis (FMEA) Reference Manual。Detroit:Ford Motor Corporation。  new window
2.小野寺勝重(2001)。實踐FMEA手法--提升產品或系統的可靠性、維護性和安全性。台北:財團法人中衛發展中心。  延伸查詢new window
3.風尙國際廣告事業有限公司(2003)。塑模成型實務手冊。台北:風尙國際廣告事業有限公司。  延伸查詢new window
4.傅和彥(2007)。現代化物料管理。台北:前程企管。  延伸查詢new window
 
 
 
 
第一頁 上一頁 下一頁 最後一頁 top