資料載入處理中...
臺灣人文及社會科學引文索引資料庫系統
:::
網站導覽
國圖首頁
聯絡我們
操作說明
English
行動版
(3.17.174.234)
登入
字型:
**字體大小變更功能,需開啟瀏覽器的JAVASCRIPT,如您的瀏覽器不支援,
IE6請利用鍵盤按住ALT鍵 + V → X → (G)最大(L)較大(M)中(S)較小(A)小,來選擇適合您的文字大小,
如為IE7以上、Firefoxy或Chrome瀏覽器則可利用鍵盤 Ctrl + (+)放大 (-)縮小來改變字型大小。
來源文獻查詢
引文查詢
瀏覽查詢
作者權威檔
引用/點閱統計
我的研究室
資料庫說明
相關網站
來源文獻查詢
/
簡易查詢
/
查詢結果列表
/
詳目列表
:::
詳目顯示
第 1 筆 / 總合 1 筆
/1
頁
來源文獻資料
外文摘要
引文資料
題名:
A Mixed Inspection Policy for Csp-t and Precise Inspection Under Inspection Errors and Return Cost
書刊名:
工業工程學刊
作者:
于鴻福
/
游文清
/
吳子凭
作者(外文):
Yu, Hong-fwu
/
Yu, Wen-ching
/
Wu, Zih-ping
出版日期:
2012
卷期:
29:6
頁次:
頁417-426
主題關鍵詞:
檢驗誤差
;
退貨成本
;
最佳混合檢驗策略
;
CSP-T
;
Inspection errors
;
Return cost
;
Optimal mixed inspection policy
原始連結:
連回原系統網址
相關次數:
被引用次數:期刊(
1
) 博士論文(0) 專書(0) 專書論文(0)
排除自我引用:
1
共同引用:0
點閱:45
This article deals with a mixed policy between precise inspection and CSP-T with inspection errors (Types I and II) and return cost. With respect to non-repairable and repairable products, the following decision variables are determined such that the unit net profit is maximal: (1) the optimal sampling plan for CSP-T and (2) the optimal proportions on which precise inspections should be taken for the non-inspected items, the non-defectives, and the defectives identified in the procedure of CSP-T. Overall, the analytical results indicate that depending on ten parameters (the process defective fraction, Type I error, Type II error, the selling price of an item, the unit formal repair cost, the unit informal repair cost, the unit return cost, the unit opportunity cost, the unit inspection cost, and the unit cost of precise inspection), both of non-repairable and repairable products have two main optimal inspection policies for CSP-T: ‘‘Do 100% inspection consecutively’’ and ‘‘Stop inspection after 100% inspection’’; besides, for the non-inspected items, the non-defectives, and the defectives identified in the procedure of CSP-T, there are two main proportions on which precise inspection should be performed: 100% and 0%.
以文找文
期刊論文
1.
Balamurali, S.、Jun, C.H.(2004)。Modified CSP-T sampling procedures for continuous production processes。Quality Technology and Quantitative Management,1(2),175-188。
2.
Case, K.E.、Bennett, G.K.、Schmidt, J.W.(1973)。The Dodge CSP-1 continuous sampling plan under inspection error。AIIE Transactions,5(2),193-202。
3.
Chen, C.H.、C.Y. Chou(2002)。Economic design of continuous sampling plan under linear inspection cost。Journal of Applied Statistics,29,1003-1009。
4.
Chen, C.H.、C.Y. Chou(2004)。Minimum average fraction inspected for modified CSP-1 plan。Pan-Pacific Management Review,7,35-43。
5.
Dodge, H.F.(1943)。A sampling inspection plan for continuous production。Annals of Mathematical Statistics,14,264-279。
6.
Dodge, H.F.、M.N. Torrey(1951)。Additional continuous sampling inspection plans。Industrial Quality Control,7,7-12。
7.
Fordice, J.J.(1972)。A tightened multi-level continuous sampling plan, CSP-T。Ammunition Procurement and Supply Agency, No. QEM,21,230-10。
8.
Gauri, S.、B.N. Mohapatra(1994)。Gert analysis of Dodge's CSP-1 continuous sampling plan。The Indian Journal of statistics,56,468-478。
9.
Ghosh, D.T.(1990)。The optimum continuous sampling plan CSP-2 with k¼i that minimizes the amount of inspection。Operations Research,27,31-38。
10.
Ghosh, D.T.(1990)。The optimum CSP-2 (k=i) that minimizes inspection when incoming quality p follows a distribution。Operations Research,27,153-164。
11.
Ghosh, D.T.(1996)。An optimum continuous sampling plan CSP-2 with k 6≠i to minimize the amount of inspection when incoming quality p follows a distribution。Journal of Statistics, 58,Series B,105-117。
12.
Govindaraju, K.、C. Kandasamy(2000)。Design of generalized CSP-C continuous sampling plan。Journal of Applied Statistics,27,829-841。
13.
Haji, A.、R. Haji(2004)。The optimal policy for a sampling plan in continuous in terms of the clearance number。Computers & Industrial Engineering,47,141-147。
14.
Lin, T.Y.、H.F. Yu(2009)。An optimal policy for CSP-1 with inspection errors and return cost。Journal of Chinese Institute of Industrial Engineers,26(1),70-76。
15.
Murphy, R.B.(1959)。Stopping rule with CSP-1 sampling plans in continuous production。Industrial Quality control,19,2-12。
16.
Resnikoff, G.J.(1960)。Minimum average fraction inspected for a continuous sampling plan。Journal of Industrial Engineering,11,208-209。
17.
Yu, H. F、Chang, A. Y.、Chiang, Y. C.(2010)。A mixed inspection for CSP-2 and precise inspection under inspection errors and return cost。Journal of the Chinese Institute of Industrial Engineers,27,304-315。
18.
Yu, H.F.、W.C. Yu、W.P. Wu(2009)。A mixed inspection policy for CSP-1 and precise inspection under inspection errors and return cost。Computers & Industrial Engineering,57,652-659。
19.
Wang, R.C.、C.H. Chen(1997)。Minimum average fraction inspected for continuous sampling plan CSP-1 under inspection error。Journal of Applied Statistics,24,539-548。
20.
Wang, R.C.、C.H. Chen(1993)。The design of CSP-2 under the conditioned inspection capacity。The International Journal of Quality & Reliability Management,10,43-18。
21.
Wang, R.C.、Chen, C.H.(1994)。Minimum AFI for CSP-2 under inspection error。Computer & Industrial Engineering,26(4),755-785。
會議論文
1.
Endres, A.C.(1979)。Minimum AFI plan designs for inspection error。Houston。414-416。
推文
當script無法執行時可按︰
推文
推薦
當script無法執行時可按︰
推薦
引用網址
當script無法執行時可按︰
引用網址
引用嵌入語法
當script無法執行時可按︰
引用嵌入語法
轉寄
當script無法執行時可按︰
轉寄
top
:::
相關期刊
相關論文
相關專書
相關著作
熱門點閱
1.
A Note on a Mixed Inspection Policy for CSP-T and Precise Inspection Under Inspection Errors and Return Cost
2.
考量檢驗誤差和退貨成本下之MLP-2和精密檢驗的最適混合檢驗策略
3.
A Joint Inspection Policy between CSP-1 and Precise Inspection for Non-repairable Products under Inspection Errors and Return Cost
4.
A mixed Inspection Policy for CSP-2 and Precise Inspection Under Inspection Errors and Return Cost
無相關博士論文
無相關書籍
無相關著作
無相關點閱
QR Code