| 期刊論文| 1. | Kadambi, V.、Abuaf, N.(198506)。An Analysis of the Thermal Response of Power Chip Packages。IEEE Trans. Electron Devices，ED-32(6)，1024-1033。   | | 2. | Bar-Gadda, R.(198709)。The Thermal Modeling of Integrated-Circuit Device Packages。IEEE Trans. Electron Devices，ED-34(9)，1934-1938。 | | 3. | Lang, W.(199009)。Heat Transport from a Chip。IEEE Trans. Electron Devices，ED-37(4)，958-963。 | | 4. | Yun-Sheng, X.、Zeng-Yaun, G.(1995)。Heat wave Phenomena in IC Chip。Int. Heat Mass Transfer.，38(15)，2919-2922。 | | 5. | Kwon, Y. W.、Salinas, D.、Neibert, M. J.(1994)。Thermally Induced Stresses in a Trilayered System。Journal of Thermal Stresses，17，489-506。 | | 6. | Mertol, A.(1996)。Thermal Performance Comparison of High Pin Count Cavity-Up Enhanced Plastic Ball Grid Array (EPBGA) Packages。IEEE Trans. Components, Packaging, and Manufacturing Technology-Part B，19(2)，427-443。 | | 7. | Desai, C. S.、Basaran, C.、Dishongh, T.、Prince, J. L.(1998)。Thermomechanical Analysis in Electronic Packaging with Unified Constitutive Model for Material and Joints。IEEE Trans. Components, Packaging, and Manufacturing Technology-Part B，21(1)，87-97。 | 會議論文| 1. | Edwards, D.、Hwang, M.、Steams, B.(1994)。Thermal Enhancement of IC Packages。Tenth IEEE SEMI-THERM™，33-43。 | | 2. | Guenin, B. M.、Marrs, R. C.、Molnar, R. J.(1995)。Analysis of a Thermally Enhanced Ball Grid Array Package。Eleventh IEEE SEMI-THERM™ Symposium，146-155。 | | 3. | Ramakrishna, K.、Thomas, T. R.、Lee, T. Y.、Trent, J. R.、Hause, J. V.(1998)。Thermal Performance of an Air-Cooled Plastic Ball Grid Array Package in Natural and Forced Convection。IEEE Inter Society Conference on Thermal Phenomena，27-34。 | 圖書| 1. | Holman, J. P.(1986)。Heat Transfer。New York：McGraw-Hill Book Co.。 | | 2. | Reddy, J. N.、Gartling, D. K.(1994)。The Finite Element Method in Heat Transfer and Fluid Dynamics。Florida：CRC Press, Inc.。 | | 3. | Rao, S. S.(1982)。The Finite Element Method in Engineering。New York：Pergamon Press Inc.。 | | 4. | Kenneth, Huebner H.、Thornton, E. A.、Byron, T. G.(1995)。The Finite Element Method for Engineers。New York：John Wiley and Sons。 | | 5. | Hans-Gunter, A.、Wolfram, H.(1980)。Injection Mold。VDI Verlag。 | 圖書論文| 1. | Bar-Cohen, A.(1983)。Thermal frontiers in the design and packaging of microelectronic equipment。Mechanical Engineering。 | |