:::

詳目顯示

回上一頁
題名:Economic Specification Limits and Process Mean Settings by Considering Unequal Target Value and Specification Center
書刊名:工業工程學刊
作者:Chen, Chung-hoChou, Chao-yuKan, Chao-chin
出版日期:2014
卷期:31:4
頁次:頁(3)1-(3)7
主題關鍵詞:Economic specification limitsProcess capability indexTarget valueTaguchi's asymmetric quadratic quality loss function
原始連結:連回原系統網址new window
相關次數:
  • 被引用次數被引用次數:期刊(2) 博士論文(0) 專書(0) 專書論文(0)
  • 排除自我引用排除自我引用:1
  • 共同引用共同引用:5
  • 點閱點閱:3
期刊論文
1.Pearn, W. L.、Wu, C. H.(2013)。Supplier selection for multiple-characteristics processes with one-sided specifications。Quality Technology and Quantitative Management,10(1),133-140。  new window
2.Chen, Chung-ho(20050900)。Rectifying Inspection Plans Applied in the Determination of the Optimum Process Mean。International Journal of Information and Management Sciences,16(3),85-95。new window  new window
3.Darwish, M. A.、Abdulmalek, F.(2012)。An integrated single-vendor single-buyer targeting problem with time-dependent process mean。International Journal of Logistics and Management,13,51-64。  new window
4.Darwish, M. A.、Abdulmalek, F.、Alkhedher, M.(2013)。Optimal selection of process mean for a stochastic inventory model。European journal of Operational Research,226,481-490。  new window
5.Darwish, M. A.、Duffuaa, S. O.(2010)。A mathematical model for the joint determination of optimal process and sampling plan parameters。Journal of Quality in Maintenance Engineering,16,181-189。  new window
6.Duffuaa, S. O.、El-Ga'aly, A.(2013)。A multi-objective mathematical optimization model for process targeting using 100% inspection policy。Applied Mathematical Modeling,37,1545-1552。  new window
7.Duffuaa, S. O.、El-Ga'aly, A.(2013)。A multi-objective optimization model for process targeting using sampling plans。Computers & Industrial Engineering,64,309-317。  new window
8.Bowling, S. R.、Khasawneh, M. T.、Kaewkuekool, S.、Cho, B. R.(2004)。A Markovian approach to determining optimum process target levels for a multi-stage serial production system。European Journal of Operational Research,159,636-650。  new window
9.Carlsson, O.(1984)。Determining the most profitable process level for a production process under different sales conditions。Journal of Quality Technology,16,44-49。  new window
10.Pearn, W. L.、Kotz, S.、Johnson, N. L.(1992)。Distributional and inferential properties of the process accuracy and process precision indices。Journal of Quality Technology,24(4),216-231。  new window
11.Grau, D.(2010)。On the choice of a capability index for asymmetric tolerances。Quality Technology & Quantitative Management,7,301-319。  new window
12.Grau, D.(2012)。Process yield, process centering and capability indices for one-sided tolerance processes。Quality Technology & Quantitative Management,9,153-170。  new window
13.Jeang, A.(2011)。Simultaneous determination of production lot size and process parameters under process deterioration and process breakdown。Omega,40,774-781。  new window
14.Jeang, A.(2011)。Economic production order quantity and quality。International Journal of Production Research,49,1753-1783。  new window
15.Jeang, Angus、Lin, Yang-Kuei(2013)。Product and process parameters determination for quality and cost。International Journal of Systems Science,45(10),2042-2054。  new window
16.Kapur, K. C.(2013)。An approach for development of specifications for quality improvement。Quality Engineering,1,63-77。  new window
17.Kapur, K. C.、Cho, B. R.(1994)。Economic design and development of specifications。Quality Engineering,6,401-417。  new window
18.李旭華(20130600)。The Linkage of Process Capability without Target Value on the Center in Six Sigma Management。中國統計學報,51(2),211-224。new window  new window
19.Maiti, S. S.、Saha, M.、Nanda, A. K.(2010)。On generalizing process capability indices。Quality Technology & Quantitative Management,7,279-300。  new window
20.Pan, J. N.、Pan, J.(2009)。Optimization of engineering tolerance design using revised loss functions。Engineering Optimization,41,99-118。  new window
21.Roan, J.、Gong, L.、Tang, K.(2000)。Joint determination of process mean, production run size and material order quantity for a container-filling process。International Journal of Production Economics,63,303-317。  new window
22.Boyles, R. A.(1991)。The Taguchi capability index。Journal of Quality Technology,23(1),17-26。  new window
23.Carlsson, O.(1989)。Economic selection of a process level under acceptance sampling by variables。Engineering Costs and Production Economics,16(1),69-78。  new window
24.Chan, L. K.、Cheng, S. W.、Spiring, F. A.(1988)。A new measure of process capability: Cpm。Journal of Quality Technology,20(3),162-175。  new window
25.Chen, C. H.、Lai, M. T.(2007)。Economic manufacturing quantity, optimum process mean, and economic specification limits setting under the rectifying inspection plan。European Journal of Operational Research,183,336-344。  new window
26.Darwish, M. A.(2009)。Economic selection of process mean for single-vendor single-buyer supply chain。European Journal of Operational Research,199(1),162-169。  new window
27.Feng, Q.、Kapur, K. C.(2006)。Economic Design of Specifications for 100% Inspection with Imperfect Measurement Systems。Quality Technology & Quantitative Management,3,127-144。  new window
28.Jeang, A.(2010)。Production order quantity for economical and quality consideration。Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,224,1277-1294。  new window
29.Pulak, M. F. S.、Al-Sultan, K. S.(1996)。The Optimum Targeting for a Single Filling Operation with Rectifying Inspection。Omega: The International Journal of Management Science,24(6),727-733。  new window
30.Rahim, M. A.、Tuffaha, F.(2004)。Integrated model for determining the optimal initial settings of the process mean and optimal production run assuming quadratic loss functions。International Journal of Production Research,42(16),3281-3300。  new window
31.Kapur, K. C.、Cho, Byung Rae(1996)。Economic Design of the Specification Region for Multiple Quality Characteristics。IIE Transactions,28,237-248。  new window
32.Kane, Victor E.(1986)。Process capability indices。Journal of Quality Technology,18(1),41-52。  new window
33.Feng, Q.、Kapur, K. C.(2006)。Economic Development of Specifications for 100% Inspection Based on Asymmetric Quality Loss Functions。IIE Transactions,38,659-669。  new window
會議論文
1.Kapur, K. C.、Wang, C. J.(1987)。Economic design of specifications based on Taguchi's concept of quality loss function。The Winter Annual Meeting of the American Society of Mechanical Engineers,23-36。  new window
圖書
1.DeVor, R. E.、Chang, T. H.、Sutherland, J. W.(1992)。Statistical Quality Design and Control。New York, NY:Macmillan Publishing Company。  new window
2.田口玄一(1986)。Introduction to Quality Engineering: Designing Quality into Products and Processes。Tokyo:Asian Productivity Organization。  new window
 
 
 
 
第一頁 上一頁 下一頁 最後一頁 top