資料載入處理中...
臺灣人文及社會科學引文索引資料庫系統
:::
網站導覽
國圖首頁
聯絡我們
操作說明
English
行動版
(3.145.79.114)
登入
字型:
**字體大小變更功能,需開啟瀏覽器的JAVASCRIPT,如您的瀏覽器不支援,
IE6請利用鍵盤按住ALT鍵 + V → X → (G)最大(L)較大(M)中(S)較小(A)小,來選擇適合您的文字大小,
如為IE7以上、Firefoxy或Chrome瀏覽器則可利用鍵盤 Ctrl + (+)放大 (-)縮小來改變字型大小。
來源文獻查詢
引文查詢
瀏覽查詢
作者權威檔
引用/點閱統計
我的研究室
資料庫說明
相關網站
來源文獻查詢
/
簡易查詢
/
查詢結果列表
/
詳目列表
:::
詳目顯示
第 1 筆 / 總合 1 筆
/1
頁
來源文獻資料
外文摘要
引文資料
題名:
Multi-Objective Metaheuristics for Solving a Type II Robotic Mixed-Model Assembly Line Balancing Problem
書刊名:
工業工程學刊
作者:
Rabbani, Masoud
/
Mousavi, Zahra
/
Farrokhi-Asl, Hamed
出版日期:
2016
卷期:
33:7
頁次:
頁472-484
主題關鍵詞:
Robotic mixed-model assembly line balancing
;
Mixed-integer linear programming
;
U-shaped assembly line
;
Multiobjective optimization
原始連結:
連回原系統網址
相關次數:
被引用次數:期刊(
1
) 博士論文(0) 專書(0) 專書論文(0)
排除自我引用:
1
共同引用:0
點閱:5
Nowadays, robots are used extensively in robotic assembly line balancing system because of the capabilities of the robots. Robotic assembly lines are used to manufacture high volume product in customization and specialization production. In this paper, type II robotic mixedmodel assembly line balancing is considered. The goals are to minimize robot purchasing costs, robot setup costs, sequence dependent setup costs, and cycle time. The proposed model tries to determine an optimal or near-optimal configuration of tasks, workstations in U-shaped assembly line balancing. In this model, two types of tasks including the special task for one product model and the common task for several products models exist. The problem with the aforementioned conditions is NP-hard problem. So, we used two different multi- objective evolutionary algorithms (MOEAs) to solve the problem. First algorithm is non-dominated sorting genetic algorithm (NSGA-II) and the second one is multi-objective particle swarm optimization (MOPSO). Also, we used GAMS software to solve the problem in small size problem to validate our proposed model. Then, some numerical examples are presented and the experimental results and the performance of the algorithms are compared with each other.
以文找文
期刊論文
1.
Nicosia, G.、Pacciarelli, D.、Pacifici, A.(2002)。Optimally balancing assembly lines with different workstations。Discrete Applied Mathematics,118,99-113。
2.
Tzai, D. M.、Yao, M. J.(1993)。A line-balance-based capacity planning procedure for series-type robotic assembly line。International Journal of Production Research,31(8),1901-1920。
3.
Rubinovitz, J.、Levitin, G.(1995)。Genetic algorithm for assembly line balancing。International Journal of Production economics,41,343-354。
4.
Aghajani, M.、R. Ghodsi、B. Javadi(2014)。Balancing of robotic mixed-model two-sided assembly line with robot setup times。The International Journal of Advanced Manufacturing Technology,74,1005-1016。
5.
Bukchin, J.、M. Tzur(2000)。Design of flexible assembly line to minimize equipment cost。IIE Transactions,32,585-598。
6.
Daoud, S.、H. Chehade、F. Yalaoui、L. Amodeo(2014)。Solving a robotic assembly line balancing problem using efficient hybrid methods。Journal of Heuristics,20,235-259。
7.
Deb, K.、P. Amrit、A. Samir、T. A. M. T. Meyarivan(2002)。A fast and elitist multi-objective genetic algorithm: NSGAII。IEEE Transactions on Evolutionary Computation,6,182。
8.
Gao, J.、L. Sun、L. Wang、M. Gen(2009)。An efficient approach for type II robotic assembly line balancing problems。Computers and Industrial Engineering,56,1065-1080。
9.
Khouja, M.、D. E. Booth、M. Suh、J. K. Mahaney Jr.(2000)。Statistical procedures for task assignment and robot selection in assembly cells。International Journal of Computer Integrated Manufacturing,13,95-106。
10.
Kim, H.、S. Park(1995)。A strong cutting plane algorithm for the robotic assembly line balancing problem。International Journal of Production Research,33,2311-2323。
11.
Liao, Li-man(20141200)。Construction and Comparison of Multi-Model and Mixed-Model Assembly Lines Balancing Problems with Bi-Objective。工業工程學刊,31(8),483-490。
12.
Manavizadeh, N.、Hosseini, N.、Rabbani, M.、Jolai, F.(2013)。A simulated annealing algorithm for a mixed model assembly U-line balancing type-I problem considering human efficiency and just-in-time approach。Computers & Industrial Engineering,64(2),669-685。
13.
Mukund Nilakantana, J.、S. G. Ponnambalam(2015)。Robotic U-shaped assembly line balancing using particle swarm optimization。Engineering Optimization,1-22。
14.
Nilakantan, J. M.、Q. H. George、S. G. Ponnambalam(2015)。An investigation on minimizing cycle time and total energy consumption in robotic assembly line systems。Journal of Cleaner Production,90,311-325。
15.
Palanikumar, K.、Latha, B.、Senthilkumar, V. S.、Karthikeyan, R.(2009)。Multiple performance optimization in machining of GFRP composites by a PCD tool using non-dominated sorting genetic algorithm (NSGA-II)。Metals and Materials International,15(2),249-258。
16.
Rubinovitz, J.、J. Bukchin(1993)。RALB--A heuristic algorithm for design and balancing of robotic assembly lines。CIRP Annals--Manufacturing Technology,42,497-500。
17.
Srinivas, N.、K. Deb(1994)。Muiltiobjective optimization using nondominated sorting in genetic algorithms。Evolutionary Computation,2,221-248。
18.
Veldhuizen, D.、G. B. Lamont(2000)。Multiobjective evolutionary algorithms: Analyzing the state-of-the-art。Evolutionary Computation,8(2),125-147。
19.
Yoosefelahi, A.、M. Aminnayeri、H. Mosadegh、H. D. Ardakani(2012)。Type II robotic assembly line balancing problem: An evolution strategies algorithm for a multi-objective model。Journal of Manufacturing Systems,31(2),139-151。
20.
Zhang, J.、H. Zhu、C. Yang、Y. Li、H. Wei(2011)。Multi-objective shape optimization of helico-axial multiphase pump impeller based on NSGA-II and ANN。Energy Conversion and Management,52(1),538-546。
21.
Coello, C. A. C.、Lechuga, M. S.、Pulido, G. T.(2004)。Handling Multiple Objectives with Particle Swarm Optimization。IEEE Transaction on Evolutionary Computation,8(3),256-279。
22.
Levitin, G.、Rubinovitz, J.、Shnits, B.(2006)。A genetic algorithm for robotic assembly line balancing。European Journal of Operational Research,168(3),811-825。
會議論文
1.
Eberhart, R. C.、Kennedy, J.(1995)。A New Optimizer Using Particle Swarm Theory。The Sixth International Symposium on Micro Machine and Human Science。Nagoya。39-43。
2.
Kennedy, James、Eberhart, Russell C.(1995)。Particle swarm optimization。1995 IEEE International Conference on Neural Networks,(會議日期: 27 Nov.-1 Dec. 1995)。IEEE Service Center。1942-1948。
3.
Knowles, J.、D. Corne(2002)。On metrics for comparing nondominated sets。Proceedings of the 2002 Congress on IEEE Evolutionary Computation,(會議日期: 2002, May)。Honolulu, HI。
4.
Nilakantan, J. M.、S. G. Ponnambalam(2012)。An efficient PSO for type II robotic assembly line balancing problem。2012 IEEE International Conference on Automation Science and Engineering (CASE),(會議日期: 2012/08/20-08/24),600-605。
5.
Rubinovitz J.、J. Bukchin(1991)。Design and balancing of robotic assembly lines。Pittsburgh, PA。
圖書
1.
Xu, J.、Z. Tao(2011)。Rough multiple objective decision making。CRC Press。
推文
當script無法執行時可按︰
推文
推薦
當script無法執行時可按︰
推薦
引用網址
當script無法執行時可按︰
引用網址
引用嵌入語法
當script無法執行時可按︰
引用嵌入語法
轉寄
當script無法執行時可按︰
轉寄
top
:::
相關期刊
相關論文
相關專書
相關著作
熱門點閱
1.
Metaheuristics for a Bi-Objective Location-Routing-Problem in Waste Collection Management
2.
Construction and Comparison of Multi-Model and Mixed-Model Assembly Lines Balancing Problems with Bi-Objective
無相關博士論文
無相關書籍
無相關著作
1.
A Branch-and-Bound Algorithm for Identical Parallel Machine Total Tardiness Scheduling Problem with preemption
2.
Bi-Objective Optimization for Integrating Production and Preventive Maintenance Scheduling in Two-Stage Assembly Flow Shop Problem
3.
Minimizing the Number of Tardy Jobs on a Two-Stage Assembly Flowshop
4.
A Branch-and-Bound Algorithm for Identical Parallel-Machine Total Completion Time Scheduling Problem with Preemption and Release Times
5.
An Exploration on Debugging Performance for Software Reliability Growth Models with Learning Effects and Change-Points
6.
A Study on Nurse Day-Off Scheduling under the Consideration of Binary Preference
7.
A Production Inventory Model for Vendor–Buyer Coordination with Quantity Discount, Backordering and Rework for Fixed Life Time Products
8.
Pricing and Collection Effort Decisions in a Closed-Loop Supply Chain
9.
Measuring Schedule Uncertainty for a Stochastic Resource-Constrained Project Using Scenario-Based Approach with Utility-Entropy Decision Model
10.
A Rostering Optimization Model for Physician Scheduling in Medical Department--A Case Study in District Hospital
11.
Total Tardiness Minimization in a Parallel Machine System with Flexible Periodic Maintenance
12.
Interpretive Structural Modeling and Path Analysis for Proposed Framework of Lean Supply Chain in Indian Manufacturing Industry
13.
Modified Single-Vendor Single-Buyer Supply Chain Model with Quality Loss for Product
14.
Secondary Use of Electric Vehicle Batteries and Potential Impacts on Business Models
QR Code