資料載入處理中...
臺灣人文及社會科學引文索引資料庫系統
:::
網站導覽
國圖首頁
聯絡我們
操作說明
English
行動版
(3.133.141.195)
登入
字型:
**字體大小變更功能,需開啟瀏覽器的JAVASCRIPT,如您的瀏覽器不支援,
IE6請利用鍵盤按住ALT鍵 + V → X → (G)最大(L)較大(M)中(S)較小(A)小,來選擇適合您的文字大小,
如為IE7以上、Firefoxy或Chrome瀏覽器則可利用鍵盤 Ctrl + (+)放大 (-)縮小來改變字型大小。
來源文獻查詢
引文查詢
瀏覽查詢
作者權威檔
引用/點閱統計
我的研究室
資料庫說明
相關網站
來源文獻查詢
/
簡易查詢
/
查詢結果列表
/
詳目列表
:::
詳目顯示
第 1 筆 / 總合 1 筆
/1
頁
來源文獻資料
摘要
外文摘要
引文資料
題名:
An Order Releasing Method to Avert Bottleneck Shifting in Semiconductor Wafer Manufacturing
書刊名:
工業工程學刊
作者:
黃承龍
/
張盛鴻
/
陳國隆
/
李榮貴
作者(外文):
Huang, Cheng-lung
/
Chang, Shang-hong
/
Chen, Kou-lung
/
Li, Rong-kwei
出版日期:
1998
卷期:
15:5
頁次:
頁449-456
主題關鍵詞:
投料法則
;
暫時瓶頸
;
瓶頸漂移
;
限制理論
;
晶圓製造
;
Order releasing
;
Bottleneck shifting
;
Theory of constraints
;
TOC
原始連結:
連回原系統網址
相關次數:
被引用次數:期刊(
1
) 博士論文(0) 專書(0) 專書論文(0)
排除自我引用:
1
共同引用:0
點閱:62
產品投料時程若控制不當,在非瓶頸製程步驟可能形成新的暫時瓶頸,此現象會間接導致原來瓶頸的缺貨,或是使得根據原始瓶頸製程步聚所訂定的投料時程無法達到預期的效果。本研究針對半導體晶圓製造廠環境,發展一個避免暫時瓶頸漂移的投料方法,比較用避免飢餓法(SA)所得到的投料計畫,與用本文所提之投料修正法產生的投料計畫,以實際晶圓製造廠生產模擬模型驗證,模擬結果顯示本文所提的方法能顯著縮短生產週期時間,降低關鍵非瓶頸機臺(受到監控的非瓶頸機臺)之在製品量,並保持系統的產出率在既定的水準。
以文找文
The order releasing methods currently available for avoiding bottleneck starvation assume that non-bottleneck machines have sufficient capacity to subordinate the releasing schedule. Although this assumption is theoretically true (due to the definition of a bottleneck), in practice, non-bottleneck machines may temporarily at some time window) lack adequate capacity to subordinate the planned releasing schedule. In other words, either a new bot- tleneck or bottleneck shifting subsequently occurs. This new bottleneck, if the production planner lacks advanced knowledge of bottleneck shifting and does not take appropriate corrective actions, adversely affects the original bottleneck performance and total production performances. Therefore, in this study , we present a bottleneck shifting averting order releasing method to resolve the above problems. The proposed method's effectiveness is confirmed by comparing it with the available SA order releasing methods. Three production performance measurements, i.e., cycle time, throughput rate and WIP level for those models are taken and compared.
以文找文
期刊論文
1.
Kager, P. W.、Lou, S.(1989)。A robust production control policy for VLSI wafer fabrication。IEEE Transactions on Semiconductor Manufacturing,2,159-164。
2.
Lozinski, C.、Glassey, C. R.(1988)。Bottleneck Starvation Indicators for Shop Floor Control。IEEE Transactions on Semiconductor Manufacturing,1(4),147-153。
3.
Wein, L. M.(1988)。Scheduling Semiconductor Wafer Fabrication。IEEE Transactions on Semiconductor Manufacturing,1(3),115-130。
4.
Glassey, C. R.、Resende, M. G. C.(1988)。Closed-loop Job Release Control for VLSI Circuit Manufacturing。IEEE Transactions on Semiconductor Manufacturing,1(1),36-46。
5.
Salegna, G. J.、Park, P. S.(1995)。Load smoothing with feedback in a bottleneck job shop。International Journal of Production Research,33(6),1549-1568。
6.
Fry, T. D.、Philipoom, P. R.(1992)。Capacity-based order review/ release strategies to improve manufacturing performance。International Journal of Production Research,30,2559-2572。
7.
Mabert, V. A.、Ragatz, G. L.(1988)。An evaluation of order release mechanisms in a job-shop environment。Decision Sciences,19,167-189。
8.
Hogg, G. L.、Phillips, D. T.、Roderick, L. M.(1992)。A comparison of order release strategies in production control systems。International Journal of Production Research,30,611-626。
9.
Fry, T. D.、Russell, G. R.(1997)。Order review/ release and lot splitting in drum-buffer-rope。International Journal of Production Research,35(3),827-845。
10.
李榮貴、吳鴻輝(1995)。限制資源漂移與其漂移行為探討。工業工程學刊,12(1),63-69。
延伸查詢
11.
Deosthali, P.、Gardel, S. S. A.、Louis, S.、Yan, H.(1992)。Testing the robustness of various production control policies in semiconductor manufacturing。IEEE Transactions on Semiconductor Manufacturing,5,1-24。
12.
Missbauer, H.、Zapfel, G.(1993)。New concepts for production planning and control。European Journal of Operational Research,67,297-320。
13.
Lingayat, S.、Mittenthal, J.、O'Keefe, R. M.(1995)。An order release mechanism for a flexible flow system。International Journal of Production Research,33,1241-1256。
14.
Bobrowski, P. M.(1989)。Implementing a heuristic in a discrete release job shop。International Journal of Production Research,27,1935-1948。
15.
Hendry, L. C.、Wong, S. K.(1994)。Alternative order release mechanisms: a comparison by simulation。International Journal of Production Research,32,2827-2842。
16.
Deane, R. H.、Irastorza, J. C.(1974)。A loading and balancing methodology of job shop control。AIIE Transactions,6,302-307。
17.
Lockett, A. G.、Muhlemann, A. P.(1978)。A problem aggregate scheduling: an application for goal programming。International Journal of Production Research,16,127-135。
18.
Buss, A. H.、Lawrence, S. R.(1994)。Shifting production bottlenecks: causes, cures, and conundrums。Production and Operations Management,3(1),21-37。
19.
Fabrycky, W. J.、Onur, L.(1987)。An input/ output control system for the dynamic job shop。IIE Transactions,19,88-97。
20.
Ragatz, G. L.、Melnyk, S. A.(1989)。Order review/ release: research issues and perspectives。International Journal of Production Research,27,1081-1096。
會議論文
1.
Uzsoy, R.、Schwartz, C.、Teyner, T.、Kayton, D.(1996)。Effects of dispatching and down time on the performance of wafer fabs operation under theory of constrains。沒有紀錄。49-56。
2.
Zuanich, D.、Whitney, R.、Wein, L. M.、Henderson, R.、Drake, A.、Lawton, J. W.(1990)。Workload regulating wafer release in a gaas facility。沒有紀錄。33-38。
學位論文
1.
黃宏文(1995)。晶圓製造廠生產作業控制策略之構建(碩士論文)。國立交通大學。
延伸查詢
圖書
1.
Goldratt, E. M.、Fox, R. E.(1986)。The Race。Croton-on-Hudson, NY。
推文
當script無法執行時可按︰
推文
推薦
當script無法執行時可按︰
推薦
引用網址
當script無法執行時可按︰
引用網址
引用嵌入語法
當script無法執行時可按︰
引用嵌入語法
轉寄
當script無法執行時可按︰
轉寄
top
:::
相關期刊
相關論文
相關專書
相關著作
熱門點閱
1.
瓶頸漂移分析與對策之研究
2.
晶圓製造廠之整合式生產控制方法
3.
以限制理論為基礎之晶圓製造廠派工法則
4.
建構一個消除瓶頸漂移的生產規劃與控制系統
無相關博士論文
無相關書籍
無相關著作
無相關點閱
QR Code