資料載入處理中...
臺灣人文及社會科學引文索引資料庫系統
:::
網站導覽
國圖首頁
聯絡我們
操作說明
English
行動版
(18.225.254.219)
登入
字型:
**字體大小變更功能,需開啟瀏覽器的JAVASCRIPT,如您的瀏覽器不支援,
IE6請利用鍵盤按住ALT鍵 + V → X → (G)最大(L)較大(M)中(S)較小(A)小,來選擇適合您的文字大小,
如為IE7以上、Firefoxy或Chrome瀏覽器則可利用鍵盤 Ctrl + (+)放大 (-)縮小來改變字型大小。
來源文獻查詢
引文查詢
瀏覽查詢
作者權威檔
引用/點閱統計
我的研究室
資料庫說明
相關網站
來源文獻查詢
/
簡易查詢
/
查詢結果列表
/
詳目列表
:::
詳目顯示
第 1 筆 / 總合 1 筆
/1
頁
來源文獻資料
摘要
外文摘要
引文資料
題名:
破壞性檢驗最適抽樣個數之研究
書刊名:
交大管理學報
作者:
黃允成
作者(外文):
Huang, Yun Cheng
出版日期:
1999
卷期:
19:1
頁次:
頁49-63
主題關鍵詞:
破壞性檢驗
;
樣本大小
;
Destructive inspection
;
Sample size
原始連結:
連回原系統網址
相關次數:
被引用次數:期刊(0) 博士論文(0) 專書(0) 專書論文(0)
排除自我引用:0
共同引用:0
點閱:56
本文針對破壞性檢驗進行研究,在考量檢驗成本及因抽樣誤差所造成之誤判損失成本下,建構一總損失成本函數,並經電腦數值模擬分析,找出使總損失成本最小化之最適抽樣個數。文中並針對母體大小、單位檢驗成本、產品單價及送驗批不良率等進行敏感度分析,並獲得五個具體結論,作為後續研究及實務應用之參考。
以文找文
In this paper we focus our attention on sample size for destructive inspection. Because of the consideration for inspection cost and costs of sampling error (including cost of producer risk and cost of consumer risk), we formulated a mathematical model for total losses. Applying the computerized numerical analysis mehtod, we can find out the optimal sample size that minimizes the total losses. Furthermore, sensitivity analysis is taken for lot size, unit cost of inspection, unit purchase price and defective rate of lot, respectively. Finally, five conclusions are drawn for future studies and applications.
以文找文
期刊論文
1.
Bai, D. S.、Hong, S. H.(1990)。Economic Design of Sampling Plans with Multi-Decision Alternatives。Naval Research Logistics,37,905-918。
2.
Bonett, D. G.、Woodward, J. A.(1994)。Sequential Defect Removal Sampling。Management Science,40(7),898-902。
3.
Cassandras, C. G.、Han, Y.(1992)。Optimal Inspection Policies for a Manufacturing Station。European Journal of Operational Research,63,35-53。
4.
Chen, S. L.、Chung, K. J.(1994)。Inspection Error Effects on Economic Selection of Target Value for a Production Process。European Journal of Operational Research,79,311-324。
5.
Drury, C. G.、Chi, C. F.(1995)。A Test of Economic Models of Stopping Policy in Visual Search。IIE Transactions,27,382-393。
6.
Duffuaa, S. O.、Al-Najjar, H. J.(1995)。An Optimal Complete Inspection Plan for Critical Multicharacteristic Components。Journal of the Operational Research Society,46,930-942。
7.
Fink, R. L.、Margavio, T. M.(1994)。Economic Models for Single Sample Acceptance Sampling Plans, No Inspection, and 100 Percent Inspection。Decision Sciences,25(4),625-653。
8.
Gilbert, S.、Emmons, H.(1995)。Managing a Deteriorating Process in a Batch Production Environment。IIE Transactions,27,233-243。
9.
Goyal, S. K.、Gunasekaran, A.、Martikainen, T.、Yli-Olli, P.(1993)。Integrating Production and Quality Control Policies: A Survey。European Journal of Operational Research,69,1-13。
10.
Kleijnen, J. P. C.、Kriens, J.、Lafleur, M. C. H. M.、Pardoel, J. H. F.(1992)。Sampling for Quality Inspection and Correction: AOQL Performance Criteria。European Journal of Operational Research,62,372-379。
11.
Lee, H. L.、Tagaras, G.(1992)。Economic Acceptance Sampling Plans in Complex Multi-stage Production Systems。International Journal of Production Research,30(11),2615-2632。
12.
Ronen, B.、Spector, Y.(1995)。Evaluating Sampling Strategy under Two Criteria。European Journal of Operational Research,80,59-67。
13.
Sheil, J.(1996)。Towards Economically Optimal First-off inspection。European Journal of Operational Research,94,179-185。
14.
Stern, H. I.、Ladany, S. P.(1994)。Optimal Number and Allocation of Controls among Serial Production Stages。The International Journal of Advanced Manufacturing Technology,9,398-407。
15.
Tang, K.(1988)。Economic Design of Product Specifications for a Complete Inspection Plan。International Journal of Production Research,26(2),203-217。
16.
Tang, K.、Schneider, H.(1990)。Cost Effectiveness of Using a Correlated Variable in a Complete Inspection Plan When Inspection Error Is Present。Naval Research Logistics,37,893-904。
推文
當script無法執行時可按︰
推文
推薦
當script無法執行時可按︰
推薦
引用網址
當script無法執行時可按︰
引用網址
引用嵌入語法
當script無法執行時可按︰
引用嵌入語法
轉寄
當script無法執行時可按︰
轉寄
top
:::
相關期刊
相關論文
相關專書
相關著作
熱門點閱
1.
非線性價格函數下破壞性檢驗最適抽樣個數之研究--以農產品批購為例
2.
考慮損失成本下破壞性檢驗最適抽樣個數之研究--以農產品批購為例
3.
貝氏估計下破壞性檢驗最適抽樣個數之研究--以農產品批購為例
無相關博士論文
無相關書籍
無相關著作
無相關點閱
QR Code