The Effect of Operating Height and Holding Mode on Holding Capacity for Female Subjects_

:::

詳目顯示

第 1 筆 / 總合 1 筆

/1頁

來源文獻資料
外文摘要
引文資料

題名：	The Effect of Operating Height and Holding Mode on Holding Capacity for Female Subjects
書刊名：	工業工程學刊
作者：	Wu, Swei-pi／Chung, Hsiu-chen
出版日期：	2013
卷期：	30:4
頁次：	頁248-255
主題關鍵詞：	Manual materials handling；Holding task；Maximum acceptable weight of holding；Psychophysics
原始連結：	連回原系統網址
相關次數：	被引用次數:期刊(0) 博士論文(0) 專書(0) 專書論文(0) 排除自我引用:0 共同引用:1 點閱:2

The holding task is a very common manual human activity, but it has not been investigated previously by psychophysicists. Eight females participate in this study. A psychophysical method is used to determine how the operating height (elbow, shoulder, and overhead heights) and the holding mode (non-dominant, dominant, and two hands) affect the maximum acceptable holding weight (MAWH), heart rate (HR), and rating of perceived exertion (RPE), when holding a box against a vertical surface. The operating height and the holding mode have a significant influence on the MAWH. However, the HR is not significantly influenced by the operating height and the holding mode. The overall RPE values are significantly influenced by the holding mode. The most stressed body parts are the arms, wrists, and shoulders. In general, these findings indicate that the holding task should be performed using two hands or ergonomically redesigned as much as possible.

以文找文

期刊論文
1.	Snook, S. H.、Ciriello, V. M.(1991)。The design of manual handling tasks: Revised tables of maximum acceptable weight and forces。Ergonomics，34，1197-1213。
2.	Wu, S. P.、Ho, C. P.、Chi, H. C.(2008)。Ergonomic study of a vertical rope-pulling task from a scaffolding。Ergonomics，51，345-354。
3.	Sakakibara, H.、Miyao, M.、Kondo, T. A.、Yamada, S. Y.(1995)。Overhead work and shoulder-neck pain in orchard farmers harvesting pears and apples。Ergonomics，38，700-706。
4.	Lee, H. Y.、Yeh, W. Y.、Chen, C. W.、Wang, J. D.(2005)。Prevalence and psychosocial risk factors of upper extremity musculoskeletal pain in industries of Taiwan: A nationwide study。Journal of Occupational Health，47，311-318。
5.	Lin, C. L.、Wang, M. J.、Drury, C. G.、Chen, Y. S.(2010)。Evaluation of perceived discomfort in repetitive arm reaching and holding tasks。International Journal of Industrial Ergonomics，40，90-96。
6.	Louhevaara, V.、Long, A.、Owen, P.、Aickin, C.、McPhee, B.(1990)。Local Muscle and Circulatory Strain in Load Lifting, Carrying and Holding Tasks。International Journal of Industrial Ergonomics，6，151-162。
7.	Miedema, M. C.、Douwes, M.、Dul, J.(1997)。Recommended maximum holding time for prevention of discomfort of static standing postures。International Journal of Industrial Ergonomics，19，9-18。
8.	Waters, T. R.、Sedlak, C. A.、Howe, C. M.、Gonzalez, C. M.、Doheny, M. O.、Patterson, M.、Nelson, A.(2009)。Recommended weight limits for lifting and holding limbs in the orthopedic practice setting。Orthopedic Nursing，28，28-32。
9.	吳水丕(20091100)。Adjustment Period Effects on Psychophysical Lifting Capacity for Female Participants。工業工程學刊，26(6)，433-439。
10.	Li, K. W.、Yu, R. F.、Gao, Y.、Maikala, R. V.、Tsai, H. H.(2009)。Physiological and perceptual responses in male Chinese workers performing combined manual materials handling tasks。International Journal of Industrial Ergonomics，39(2)，422-427。
11.	Anton, D.、Shibley, L. D.、Fethke, N. B.、Hess, J.、Cook, T. M.、Rosecrance, J.(2001)。The effect of overhead drilling position on shoulder moment and electromyography。Ergonomics，44，489-501。
12.	Ciriello, V. M.(2007)。The effects of container size, frequency and extended horizontal reach on maximum acceptable weight of lifting for female industrial workers。Applied Ergonomics，38，1-5。
13.	Dempsy, P. G.、Hashemi, L.(1999)。Analysis of worker's compensation claims associated with manual materials handling。Ergonomics，42，183-195。
14.	Frey Law, L. A.、Lee, J. E.、McMullen, T. R.、Xia, T.(2010)。Relationships between maximum holding time and ratings of pain and exertion differ for static and dynamic tasks。Applied Ergonomics，42，9-15。
15.	Giroux, B.、Lamontagne, M.(1992)。Net shoulder joint moment and muscular activity during light weight handling at different displacements and frequencies。Ergonomics，35，385-403。
16.	Incel, N. A.、Ceceli, E.、Durukan, P. B.、Erdem, H. R.、Yorgancioglu, Z. R.(2002)。Grip strength: Effect of hand dominance。Singapore Medicine Journal，43，234-237。
17.	Keyserling, W. M.、Brouwer, M.、Silverstein, B. A.(1992)。A checklist for evaluating ergonomic risk factors resulting from awkward postures of the legs, trunk and neck。International Journal of Industrial Ergonomics，9，283-301。
18.	Olendorf, M. R.、Drury, C. G.(2001)。Postural discomfort and perceived exertion in standardized box-holding postures。Ergonomics，44，1341-1367。
19.	Petersen, P.、Petrick, M.、Connor, H.、Conklin, D.(1989)。Grip strength and hand dominance: Challenging the 10% rule。American Journal of Occupational Therapy，43，444-447。
20.	Sjogaard, G.、Savard, G.、Juel, C.(1988)。Muscle blood flow during isometric activity and its relation to muscle fatigue。European Journal of Applied Physiology and Occupational Physiology，57，327-335。
21.	Tiwari, P. S.、Gite, L. P.、Majumder, J.、Pharade, S. C.、Singh, V. V.(2010)。Push/pull strength of agricultural workers in central India。International Journal of Industrial Ergonomics，40，1-7。
22.	Wu, S. P.、Chang, S. Y.(2010)。Effects of carrying method and box handles on two-person team carrying capacity for females。Applied Ergonomics，41，615-619。
23.	Wu, S. P.、Lin, C. H.(2005)。The Study of Bi-manual Lifting Task of Chinese Females。Journal of Occupational Safety and Health，13，274-282。
24.	Wu, S. P.、Lee, Y. H.、Hsu, S. H.(1993)。A review and comparison of research methods in manual materials lifting。Journal of Technology，8，179-192。
25.	Wu, S. P.、Hsu, W. C.、Chen, Y. J.、He, J. W.(2011)。An ergonomic investigation of holding task in Taiwan。Industrial Safety and Health Monthly Journal，269，40-49。
26.	Yoon, H.、Smith, J. L.(1999)。Psychophysical and physiological study of one-handed and two-handed combined task。International Journal of Industrial Ergonomics，24，49-60。
27.	Garg, A.、Ayoub, M. M.(1980)。What criteria exist for determining how much load can be lifted safely。Human Factors，22，475-486。
28.	Murphy, P. L.、Sorock, G.、Courteny, T. K.、Webster, B. S.、Leamon, T. L.(1996)。Injury and illness in the American workplace: A comparison of data sources。American Journal of Industrial Medicine，30，130-141。
29.	Snook, S. H.、Irvine, C. H.(1967)。Maximum acceptable weight of lift。American Industrial Hygiene Association Journal，28，322-329。
30.	Waters, T. R.、Putz-Anderson, V.、Garg, A.(1993)。Revised NIOSH equation for the design and evaluation of manual lifting tasks。Ergonomics，36，749-776。
31.	Snook, S. H.(1978)。The Design of Manual Handling Tasks。Ergonomics，21(12)，963-985。

研究報告
1.	Ayoub, M. M.、Smith, J. L.、Selan, J. L.、Chen, H. C.、Lee, Y. H.、Kim, H. K.、Fernandez, J. E.(1987)。Manual Material Handling in Unusual Posture。Lubbock, Texas：Department of Industrial Engineering, Texas Tech University。

圖書
1.	Ayoub, M. M.、Mital, A.(1989)。Manual Materials Handling。London：Taylor & Francis。
2.	NIOSH(1981)。Work Practices Guide for Manual Load Lifting。Cincinnati, OH：National Institute for Occupational Safety and Health。
3.	Borg, G.(1962)。Physical performance and perceived exertion。Lund：Gleerup。

其他
1.	Kurtus, R.。Coefficient of friction values for clean surfaces，www.School for champions.com/science/frictioncoefficient.Htm。

推文
推薦
引用網址
引用嵌入語法
轉寄

top

:::

相關期刊
相關論文
相關專書
相關著作
熱門點閱

1.	手部條件對於偶發性最大可承受卸下重量之效應
2.	Adjustment Period Effects on Psychophysical Lifting Capacity for Female Participants

無相關博士論文

無相關書籍

無相關著作

無相關點閱

QR Code

臺灣人文及社會科學引文索引資料庫系統

詳目顯示

臺灣人文及社會科學引文索引資料庫