臺灣人文及社會科學引文索引資料庫系統

:::

詳目顯示

回上一頁
第 1 筆 / 總合 1 筆   第一頁 上一頁 下一頁 最後一頁
/1頁
題名：探討多國語音導覽裝置、置物架製程最佳化及多機自動同步‒系統創新理論
作者：林瑛祥
作者(外文)：Lin,Ying-Hsiang
校院名稱：國立彰化師範大學
系所名稱：工業教育與技術學系
指導教授：盧建余
學位類別：博士
出版日期：2018
主題關鍵詞：系統創新理論；矛盾矩陣；田口品質工程；延遲時間；System innovation theory；contradiction matrix；Taguchi quality engineering；delay time
原始連結：連回原系統網址new window
相關次數：
  • 被引用次數被引用次數:期刊(0) 博士論文(0) 專書(0) 專書論文(0)
  • 排除自我引用排除自我引用:0
  • 共同引用共同引用:0
  • 點閱點閱:3
本論文旨在藉由系統創新理論（Teoriya Resheniya Izobreatatelskikh Zadatch，TRIZ）探討利用矛盾矩陣及40個創新法則，對多國語音導覽裝置進行創新、改良，提供多國語言為博物館內的設施、作品做詳細的說明與介紹。接著，結合田口品質工程，尋找置物架每層之單點載重優化之實驗水準組合，Cpk由0.42提升為1.37，顯示此結合性方法能有效改善置物架單點載重，可供家具工廠進行參考。最後利用TRIZ提供了一個設計流程方法與邏輯思考概念，從問題思考到解決問題的流程，提高改良設計時解決問題的可行性。對馬達同步啟動方法進行創新、改良，使多機馬達驅動器能同時收到控制器的命令，並計算控制器導到該馬達驅動器之延遲時間並加以校正，降低加工上的誤差。
This study aims to discuss the TRIZ system innovation theory. In terms of the research topic, a contradiction matrix and 40 inventive principles were used to innovate and improve the multi-national audio guide devices, in order to provide multiple languages to make a detailed description and introduction of the facilities and works in the museum. In addition, Taguchi quality engineering was combined to determine the experimental level combination of the single-point load optimization on each layer of a commodity shelf; Cpk was improved from 0.42 to 1.37, showing that this combined method can effectively improve the single-point load on the commodity shelf, which can be a reference for furniture plants. Finally, TRIZ was applied to provide a design procedure method and logical thinking concept to enhance the feasibility of problem solving, as based on the procedure from problem thinking to problem solving during design improvement, the motor’s synchronous starting method was innovated and improved to make the multi-machine motor drives receive orders from the controller, and simultaneously calculate and correct the delay time of importing from the controller to this motor drive to reduce the errors in machining.
[1] C.K., Prahalad, G., Hamel, “The core competence of the corporation Harvard”, Business Review 68(3), 749-779, 1990.
[2] 林宜君 ，以 QFD 與 TRIZ 理論為基礎建構產品開發評估模型，逢甲大學，工業工程與系統管理研究所碩士論文，2007。
[3 T. M., Amabile, “The Social Psychology of Creativity”, New York：Springer- Verlag, 1983.
[4] J., Hipple, “The integration of TRIZ problem solving techniques with other problem solving and assessment tools,”The TRIZ Journal. Augest, 2003.
[5] G., Altshuller, “The Innovation Algorithm:TRIZ Systematic Innovation and Technical Creativity,” Technical Innovation Center, Inc.,Worcester, 2000.
[6] 宋明弘， TRIZ 萃智系統性創新理論與應用，鼎茂圖書，2009。
[7] C. P., Chang, Y.H., Lin, “Applying TRIZ to Improve a Guide Post,”Applied Mechanics and Materials, 464, 431-435, 2014.
[8] Y.H., Lin, S.P., Li, C.Y., Lu, R.G., Chung, D.F., Chen, “Applying the TRIZ Systematic Innovation Method to Improve Short Circuit Devices,”Advances in Engineering Research, 58 , 198-200, 2016
[9] C. P., Chang, Y.H., Lin, & C. Y., Lu, “Applying TRIZ Systematic Innovation Method to Improve Urinals,”Advances in Engineering Research, 22, 793-795, 2015.
[10] 徐明澤、魏相 ， 發明程序大綱，北京現代管理學院，1985。
[11] J. W., Liu, Y. Y., Wang, “Intelligent Product Design Based on TRIZ Theory,”Control and Instruments in Chemical Industry, 1, 73 - 76,86, 2018.
[12] X., Zhao, “Innovative Design Based on TRIZ,” New Technology & New Process, 7, 19 – 24, 2017.
[13] Y. L., Men, “Practice Research on TRIZ Theory to Solve Technical Problems”, Innovation Science and Technology, 6, 34 – 37, 2016.
[14] W., Li, Z., Zhao, “Guide Students' Innovation by TRIZ Theory,”Modern Manufacturing Technology and Equipment, 5, 180 – 182, 2015.
[15] J. X., Lu, “Evolution Study of Dates Drying Equipment Based on TRIZ,”Value Engineering, 36, 305-306, 2014.
[16] J. D., Day, J. C., Wang, “Improving the IC Product Design by Using TRIZ Theory-A Case Study of S Company,”Journal of Commercial Modernization, 7(2), 117 – 139, 2013.
[17] M., Jiang, L. J., Liu, “A Research about Basic Computer Course Teaching Reform Based on "TRIZ-CDIO,”Computer Knowledge and Technology, 35, 8435 – 8437, 2012.
[18] D. J., Wang, G. Q., Zhang, “An Innovation Design of Detecting and Removing Device of GDX2 Based on TRIZ,”Automation Panorama, 10, 88-92, 2011.
[19] Y. Q., Zhou, “The Principle of Contradiction in TRIZ and Application,”Science And Management, 30(3), 15 – 17, 2010.
[20] N., Chen, Y. F., Zhu, “Use TRIZ to Avoid Six Sigma Bottlenecks,”Science And Management, 29(2), 35 – 37, 2009.
[21] W., Duain, J., Tang, “A innovative structure design of BOSA filter assembly system based on TRIZ theory,”Manufacturing Automation, 1, 116 – 120, 2018.
[22] S. P., Lu, D. Z., Liu, C., Guo, & F. Y., Zheng, “Innovative Design of Stereoscopic Garage Based on TRIZ Altshuller Contradiction Matrix,”Equipment Manufacturing Technology, 9, 115 – 117, 2017.
[23] S. J., Yan, B., He, W., Wang, Y. Li, & C., Wan, “Innovative of On-line Automatic Injection Yards Device on the Hot Steel Based on Contradictory Matrix,” Metallurgical Equipment, 6, 4 – 8, 2016.
[24] T. S., Wen, S. G., Miaou, & Y. Y., Lin, “Patent Survey and Analysis: Swimming Applications with Accelerometers,”Journal of Advanced Engineering, 10(1), 31-46, 2015.
[25] D. L., Liu, M., Song, “Application of TRIZ Theory in Improving Wear Resistance of Mill Liner,” Non-ferrous Metallurgical Equipment, 5, 22-24, 2014.
[26] S. Y., Chen, W., Peng, & C. Y., Yao, “Innovative Design of New Wire-Saw Winding Equipment Based on TRIZ Theory,”Machinery Design & Manufacture, 1, 4 – 6, 2013.
[27] J. W., Guo, Y. C., Zhang, Y. H., Xie, Y. H., Liu, & N., Ma, “Research of general contradiction matrix based on association rule,” Application Research of Computers, 10, 3655 – 3659, 2012.
[28] T., Zhang, “Research on Improving Teaching Quality of Pro/E Course Based on Contradictory Matrix Method of TRIZ,”Machine Building & Automation, 229, 19-20, 2011.
[29] F., Xiong, P., Cui, M. L., Liu, “Innovative Design of 3.5 MHz Radio Direction-Finding Receiver by TRIZ Theory,”Packaging Engineering, 31(22), 15 – 18, 2010.
[30] L., Zhu, “A scheme of avoiding sleeve eroding based on TRIZ,”Modern Manufacturing Engineering, 4, 70 – 71+82, 2009.
[31] 趙敏、史曉凌、段海波原著，許勝源編譯 ， TRIZ入門與實踐，鼎茂圖書，2012。
[32] X. B., Ding, M. Q., Zhang, & L. F., Han, “The development of a type of steel frame machine based on TRIZ,”MACHINE DESIGN AND MANUFACTURING ENGINEERING, 2, 69 – 73, 2017.
[33] R., Li, R. N., Sa, & X. J., Huang, “Patent Information Organization Based on TRIZ: A Case Study in the Field of New Energy Car Battery,” Journal of the China Society for Scientific andTechnical Information, 2, 111 – 122, 2017.
[34] B. D., Huang, L. S., Zhou, L. L., An, W., Wei, & Q. K., Bu, “Configuration axiomatic design method for the machining fixtures integrating TRIZ,” Chinese Journal of Scientific Instrument, 4, 1031 – 1040, 2016.
[35] W., Zhou, J. B., Wang, & Y., Xiang, “Armature Guide Ring Automation Assembly Equipment Feeding Mechanism Design Based on TRIZ,”Mechanical Engineering & Automation, 1, 118 – 119+121, 2016.
[36] W. J., Wang, “Improved Design of Sealed Vehicle Connector Based on TRIZ Theory,”Mechatronics, 5, 74-77, 2014.
[37] Y. H., Luo, Y. F., Shao, “Evaluation on Innovative Method Integrated by TRIZ Based on Hybrid Multi-attribute Decision-making”, Technology Economics, 8, 1 – 8, 2013.
[38] Y. L., Dou, B., Hu, & Y. Y., Huang, “The Application of TRIZ Theory Technical Contradiction Based on Analysis and Improvement of Wind Turbine Blades,” MACHINE DESIGN AND MANUFACTURING ENGINEERING, 27, 93 – 98, 2011.
[39] L. Y., Li, M. L., Wang, “Fault Forecasts and Diagnostic Technique of Coating Production Line Based on TRIZ Theory,”Modern Paint and Finishing, 5, 55 - 56+59, 2011.
[40] M. Y., Zhou, N., Huang, Q. Wang, & J. W. , Zhang, “Application of TRIZ Theory in Product Perceptual Design,”Packaging Engineering, 32(4), 62 - 65+86, 2011.
[41] S. M., Li, Y., Zhang, X., Zhao, & S. C., Gong, “Analysis and improvement of the Vacuum Circuit Breaker Based on TRIZ Theory,”MACHINE DESIGN AND MANUFACTURING ENGINEERING, 19, 54 – 56, 2011.
[42] D., Xu, X. F., Lei, “Application of Innovation Principle of TRIZ Theory in Automotive Design,”Automobile Parts, 11, 80-82, 2017.
[43] H., Yang, “The application of TRIZ innovation theory in architectural modeling teaching,”Journal of Architectural Education in Institutions of Higher Learning, 2, 70-75, 2017.
[44] M., Zhao, C. Y., Huang, & R., Gan, “Application of TRIZ theory in research of sustainable utilization of water resource,”Water Resources Protection, 2, 36 – 39+44, 2015.
[45] H. M., Lin, T. F., Chuang, “Using TRIZ-Based Innovation Principles and a Process as Problem Solving Methods for Hosiery Tourism Factories,” Journal of Quality, 22(6), 483-506, 2015.
[46] L., Zhang, Y. Y., Hung, “Innovative Design of Walking Mechanism of Stair-climbing Wheelchiar based on the Theory of TRIZ,”New Technology & New Process, 10, 62-64, 2014.
[47] C., Zhu, J., Chen, & Z. F., Wang, “Exploration on Integrating TRIZ In n ovation Principle into College Physics Experiment Courses,”Physics Bulletin, 8, 8-10, 2013.
[48] Y. H., Wang, K. J., Zang, “The Application of TRIZ Theory in Value Optimization,”Value Engineering, 229, 19-20, 2011.
[49] F. F., He, “The innovative design of brake based on TRIZ theory,”Machinery, 5, 49 – 52, 2010.
[50] H. H., Chang, P. W., Lu, “Using a TRIZ-based Method to Design Innovative Service Quality-A Case Study on Insurance Industry,”Journal of Quality, 3, 179-193, 2009.
[51] C., Qiu, J. W., Feng, & C. M., Guo, “Study on Comparison of TRIZ and Extenics Theory”, Technology Economics, 3, 70 – 73, 2008.
[52] J. L., Zhang, G. Z., Cao, & X. J., Xing, “Application of substance-field & scenario decomposition method in industrial design,” Journal of Engineering Design, 4, 316 – 321, 2016.
[53] B. C., Meng, H. J., Zhang, & J. X., Chen, “Applications of TRIZ Theory in Technological Innovation of Iron and Steel Industry”, Science & Technology of Baotou Steel Corporation, 4, 48 – 50, 2016.
[54] C. T., Wu, “Application of TRIZ to the innovation of hand-loop bag design with adjustable content and UV detection,”Journal of Lan Yang Institute of Technology, 14, 9-17, 2015.
[55] Z. H., Wang, S. C., Ma, & W. G., Huo, “Study on application of su-field analysis method in EDM process,”Journal of Tianjing University of Technology and Education, 4, 28-31, 2014.
[56] M. Q., Xu, Q. J., Feng, “Innovation design for range hood based on Su-field analysis,”China Appliance Technology, 7, 82 – 84, 2013.
[57] H. T., Han, H. X., Fan, W., X. Y., Wang, Li, J. L., Wang, & M. W., Chui, “The improvement design of a transformable supporting mechanism based on TRIZ,”Machinery Design & Manufacture, 2, 31-33, 2010.
[58] Z. H., Jian, X. M., Liu, Z. W., Wang, “Application Process of Standard Solutions Based on Extended Su-field Analysis,”Machine Design & Research, 6, 15-18, 2010.
[59] G. Q., Liu, “Application of Su-Field Analysis Method to the Innovation of Control Strategies,” Machine Design & Research, 3, 7 – 11, 2010.
[60] J. H., Zhang, R. H., Tan, & Z. S., Chen, “Study on the Method of Function Analysis Based on Su-field Analysis,”Machine Design and Research, 1, 19-23, 2009.
[61] F. H., Yu, J., Li, “Exploratory Research on Application of Substance-Field Analysis in Management Activities,”Industrial Engineering Journal, 4, 57 –59, 2008.
[62] 大前研一著，謝育容譯，創新者的思考：看見生意與創意的源頭，商周出版社，2006。
[63] F., Damanpour, S., Marguerite, “Characteristics of Innovation and Innovation Adoption in Public Organizations: Assessing the Role of Managers,” Journal of Public Administration Research and Theory, 19（3）, 495-522, 2009.
[64] R. M., Krause, “Policy Innovation, Intergovernmental Relations, and the Adoption of Climate Protection Initiatives by U.S Cities,” Journal of Urban Affairs, 33（1）, 163-175, 2010.
[65] C. P., Lee, “Factors Affecting Local Government Innovation,”Soochow Journal of Political Science, 31（1）, 105 – 160, 2013.
[66] H.A., De Vries, V.J.J.M., Bekkers, L.G., Tummers, “Innovation in the Public Sector: A Systematic Review and Future Research Agenda,”Public Administration, 91（1）, 146-166, 2016.
[67] 姜台林，TRIZ發明問題解決理論，宇河文化， 2008。
[68] M. H., Huang, C. T., Hung, Y. P., Cheng, M. T., Lin, & S. C., Yang, “The exploration of the convergence of national archives with cultural and creative industries in UK,”USA and Taiwan, File Quarterly, 13(4), 4-21, 2014.
[69] C. Y., Huang, Y. H., Lin, C. P., Chang, C. Y., Lu, “A Study on System Innovation Theory Applied to Improve the Multilanguage Guiding Device,” Advances in Computer Science Research , 76, 1173-1177, 2017.
[70] V.E., Kane, “Process Capability Indices”, Journal of Quality Technology, 18, 41-52, 1986.
[71] 田口玄一著，陳耀茂譯，田口統計解析法，五南圖書出版社，2003。
[72] H. W., Tu, “Integration of Interaction Design and Mechatronics,”Journal of Lan Yang Institute of Technology, 12, 15-20, 2013.
[73] Y. H., Qu, F., Liang, L. S., Chen, “Research on Information Synchronization of Distributed Multi-UAVs Coordinated Control,”Fire Control And Command Control, 35(11), 65-68, 2010.
[74] S. P., Li, Y. H., Lin, C. Y., Lu, R. G., Chung, D. F., Chen, J. S. Chen, & W. C., Chou, “The Influence of Positive Traits of University Students on Individual Creativity,”Advances in Education Sciences, 13, 41-46, 2017.
 
 
 
 
第一頁 上一頁 下一頁 最後一頁 top
QR Code
QRCODE

臺灣人文及社會科學引文索引資料庫

目前上線人數：846（臺灣：846，外國：0） ／ 本年度總使用人次：1972506 ／ 訪客人次（自102年09月）：67768898
國家圖書館著作權聲明 Copyright © 2013 All rights reserved.
本館地址: 100201臺北市中山南路20號． 本館地圖及交通資訊．
總機：(02)23619132．最佳瀏覽解析度為1024x768以上