臺灣人文及社會科學引文索引資料庫系統

:::

詳目顯示

回上一頁
第 1 筆 / 總合 1 筆   第一頁 上一頁 下一頁 最後一頁
/1頁
題名：新產品發展早期階段之設計/製造整合--探索分析與實證
書刊名：臺大管理論叢
作者：陳嵩 引用關係
作者(外文)：Chen, Song
出版日期：2001
卷期：12:1
頁次：頁85-121
主題關鍵詞：整合機制；設計製造整合；新產品績效；Integration mechanisms；Design-manufacturing integration；New product performance
原始連結：連回原系統網址new window
相關次數：
  • 被引用次數被引用次數:期刊(6) 博士論文(1) 專書(0) 專書論文(0)
  • 排除自我引用排除自我引用:2
  • 共同引用共同引用:40
  • 點閱點閱:131
許多研究探討新產品設計階段的設計/製造整合對新產品績效之影響，唯少有實證研究探討產品發展早期階段的設計/製造整合之貢獻。本研究以新產品發展早期階段的設計/製造整合(包括跨部門關係、資訊交流及製造涉入)為焦點，探討、推論設計/製造整合對新產品績效的影響、跨都門整合機制對設計/製造整合的影響，並以本省資訊硬體產品製造廠商的64個新產品開發專案為實證對象。路徑分析結果顯示，跨部門整合機制(如輪調/訓練整合、角色責任正式化及共同目標)對新產品發展早期階段的設計/製造整合有非常顯著的正向影響、設計/製造間的資訊交流及製造涉入對新產品績效有非常顯著的正向影響。最後，研究者針對實證研究結果在新產品開發管理上的涵義及後續研究做一些討論及建議。
Substantial research has investigated the impact of design-manufacturing integration (DMI) in the product design phase on new product performance, little empirical research has explored the contribution of DMI in the predevelopment phases. This study, with a focus on DMI (including interdepartmental relationships, information flow, and manufacturing involvement) in the early phases of new product development (NPO), examines the influence of interdepartmental integration mechanisms on DMI and the impact of DMI on new product performance. Sixty-four product development projects from information hardware product manufacturers in Taiwan were sampled as empirical subjects. The results of path analysis indicate that integration mechanisms (such as job rotation, cross-functional training, formalization of role responsibility, and common goals) have significantly positive influence on DMI. Also the findings show that manufacturing involvement and information flow are positively related to new product performance. Finally, implications for management and recommendations for future research are presented.
期刊論文
1.Hull, F.、Collins, P. D.、Liker, J. K.(1996)。Composite Forms of Organization as a Strategy for Concurrent Engineering Effectiveness。IEEE Transactions on Engineering Management，43(2)，133-142。  new window
2.Nihtilä, Jukka K.(1999)。R&D-Production Integration in the Early Phases of New Product Development Projects。Journal of Engineering and Technology Management，16(1)，55-81。  new window
3.張存金、盧淵源(20010400)。研發團隊結構特性及整合機制與研發績效關係之研究--因徑分析模式。企業管理學報，49，97-134。new window  延伸查詢new window
4.Brown, S. L.、Eisenhardt, K. M.(1995)。Product Development: Past Research, Present Findings and Future Direction。Academy of Management Review，20(2)，343-378。  new window
5.Ruekert, R. W.、Walker, O. C. Jr.(1987)。Marketing's Interaction with Other Functional Units: A Conceptual Framework and Empirical Evidence。Journal of Marketing，51，1-19。  new window
6.Rochford, L.、Rudelius, W.(1997)。New Product Development Process: Stages and Successes in the Medical Products Industry。Industrial Marketing Management，26，67-84。  new window
7.Kahn, K. B.、McDonough, Edward F. III(1997)。An empirical study of the relationships among co-location, integration, and satisfaction。Journal of Product Innovation Management，14(3)，161-178。  new window
8.Bergen, S. A.、Mijajima, R.、Mclaughlin, C. P.(1988)。The R&D/ Production Interface in Four Developed Countries。R&D Management，18(3)，201-216。  new window
9.Quinn, James Brian、Anderson, Philip、Finkelstein, Sydney(1996)。Managing Professional Intellect: Making the Most of the Best。Harvard Business Review，74(2)，71-80。  new window
10.Liker, J. K.、Collins, P. D.、Hull, F. M.(1999)。Flexibility and Standardization: Test of a Contingency Model of Product Design-Manufacturing Integration。Journal of Product Innovation Management，16(3)，248-267。  new window
11.Handfield, R. B.(1994)。Effects of Concurrent Engineering on Make-to-Order Products。IEEE Transaction on Engineering Management，41(4)，1-11。  new window
12.Tjosvold, D.、Dann, V.、Wong, C.(1992)。Managing conflict between departments to serve customers。Human Relations，45(10)，1035-1054。  new window
13.Parry, M. E.、Song, X. M.(1993)。Determinants of R&D-Marketing Interface in High-Tech Japanese Firms。Journal of Product Innovation Management，10(1)，104-122。  new window
14.Song, X. M.、Montoya-Weiss, M. M.、Schmidt, J. B.(1997)。Antecedents and consequences of cross-functional cooperation: A comparison of R&D, manufacturing, and marketing perspectives。Journal of Product Innovation Management，14(1)，35-47。  new window
15.Maltz, E.、Kohli, A. K.(2000)。Reducing marketing's conflict with other functions: The differential effects of integrating mechanisms。Journal of the Academy of Marketing Science，28(4)，479-492。  new window
16.Menon, A.、Jaworski, B. J.、Kohli, A. K.(1997)。Product Quality: Impact of Interdepartmental Interactions。Journal of the Academy of Marketing Science，25(3)，187-200。  new window
17.Gupta, A. K.、Raj, S. P.、Wilemon, D.(1986)。A Model for Studying R&D--Marketing Interface in the Product Innovation Process。Journal of Marketing，50(2)，7-17。  new window
18.張世佳、林能白(19990100)。製造部門積極性角色與事業策略之配適分析。管理評論，18(1)，59-95。new window  延伸查詢new window
19.Gupta, A. K.、Raj, S. P.、Wilemon, D. L.(1985)。R&D and Marketing Dialogue in High-tech Firms。Industrial Marketing Management，14，289-300。  new window
20.Jaworski, Bernard J.(1988)。Toward a theory of marketing control: environmental context, control types, and consequences。Journal of Marketing，52(3)，23-39。  new window
21.Rusinko, C. A.(1997)。Design-manufacturing integration to improve new product development: The effects of some organizational and group-level practices。Project Management Journal，28(2)，37-46。  new window
22.Neeley, S. M.、Song, X. Michael、Zhao, Yushan(1996)。Managing R&D--Marketing Integration in the New Product Development Process。Industrial Marketing Management，25，545-556。  new window
23.Susman, G. I.、Ray, J. M.(1999)。Test of a Model of Organizational Contributors to Product Development Team Effectiveness。Journal of Engineering and Technology Management，16(3/4)，223-245。  new window
24.Ayers, D.、Dahlstrom, R.、Skinner, S. J.(1997)。An Exploratory Investigation of Organizational Antecedents to New Product Success。Journal of Marketing Research，34(1)，107-116。  new window
25.Adler, Paul S.(1995)。Interdepartmental Interdependence and Coordination: The Case of the Design/Manufacturing Interface。Organization Science，6(2)，147-167。  new window
26.Cooper, R. G.(1998)。Benchmarking New Product Performance: Results of the Best Practices Study。European Management Journal，16(1)，1-17。  new window
27.Gerwin, D.(1993)。Integrating Manufacturing into the Strategic Phases of New Product Development。California Management Review，35(4)，123-136。  new window
28.Hauptman, O.、Hirji, K. K.(1999)。Managing Integration and Coordination in Cross-functional Teams: An International Study of Concurrent Engineering Product Development。R&D Management，29(2)，179-191。  new window
29.Jassawlla, A. R.、Sashittal, H. C.(2000)。Cross-Functional Dynamics in New Product Development。Research-Technology Management，43(1)，46-49。  new window
30.Khurana, A.、Rosenthal, S. R.(1997)。Integrating Fuzzy Front End of New Product Development。Sloan Management Review，38(2)，103-120。  new window
31.Song, X. M.、Thieme, R. J.、Xie, Jinhong(1998)。The Impact of Cross-Functional Joint Involvement Across Product Development Stages: An Exploratory Study。Journal of Product Innovation Management，15(4)，289-303。  new window
32.林清河、周福星、譚伯群、施坤壽(19981200)。品質管理與組織氣候及績效之關聯性分析。中山管理評論，6(4)，1057-1080。new window  延伸查詢new window
33.林明杰、李峻銘(19991200)。企業技術引進策略、認知與實際整合差距對新產品研發績效影響之研究。管理學報，16(4)，683-701。new window  延伸查詢new window
34.陳嵩、蔡明田、張淑昭(19980600)。製造主管決策參與對經營績效的影響--資訊硬體製造業之實證。管理學報，15(2)，295-318。new window  延伸查詢new window
35.Griffin, Abbie、Hauser, John R.(1996)。Integrating R&D and Marketing: A Review and Analysis of the Literature。The Journal of Product Innovation Management，13(3)，191-215。  new window
36.Shapiro, Benson P.(1977)。Can Marketing and Manufacturing Coexist?。Harvard Business Review，55(5)，104-114。  new window
37.Souder, William E.(1988)。Managing relations between R&D and marketing in new product development projects。Journal of Product Innovation Management，5(1)，6-19。  new window
38.Nonaka, Ikujiro(1991)。The Knowledge-Creating Company。Harvard Business Review，69(6)，96-104。  new window
39.Song, X. Michael、Xie, Jinhong、Dyer, Barbara(2000)。Antecedents and Consequences of Marketing Managers' Conflict-Handling Behaviors。Journal of Marketing，64(1)，50-66。  new window
40.Lawrence, Paul R.、Lorsch, Jay W.(1967)。Differentiation and Integration in Complex Organizations。Administrative Science Quarterly，12(1)，1-47。  new window
41.Kanungo, Rabindra N.(1979)。The concepts of alienation and involvement revisited。Psychological bulletin，86(1)，119-138。  new window
42.Rizzo, J. R.、Lirtzman, S. I.、House, R. J.(1970)。Role conflict and ambiguity in complex organizations。Administrative Science Quarterly，15(2)，150-163。  new window
43.Swink, Morgan(1999)。Threats to New Product Manufacturability and the Effects of Development Team Integration Processes。Journal of Operations Management，17(6)，691-709。  new window
44.Moenaert, R. K.、Souder, W. E.、Meyer, A. D.、Deschoolmeester, D.(1994)。R&D-Marketing Integration Mechanism, Communication Flows, and Innovation Success。Journal of Product Innovation Management，11(1)，31-45。  new window
45.Rusinko, C. A.(1999)。Exploring the Use of Design-Manufacturing Integration (DMI) to Facilitate Product Development: A Test of Some Practices。IEEE Transactions on Engineering Management，46(1)，56-71。  new window
46.Gupta, A. K.、Raj, S. P.、Wilemon, D.(1987)。Managing the R&D-Marketing Interface。Research Management，30(2)，38-43。  new window
47.Verganti, R.(1999)。Planned Flexibility: Linking Anticipation and Reaction in Product Development Projects。Journal of Product Innovation Management，16(4)，363-376。  new window
48.盧淵源、張存金(1997)。由全面品質管理觀點探討新產品研發過程中之溝通行為。品質學報，4(1)，133-162。  延伸查詢new window
49.Agarwal, N.、Singh, P.(1998)。Organizational Rewards for a Changing Workplace: An Examination of Theory and Practice。International Journal of Technology Management，16(1-3)，225-238。  new window
50.Charan, R.(1991)。How Networks Reshape Organizations for Results。Harvard Business Review，69(2)，104-115。  new window
51.Duxbury, L.、Neufeld, D.(1999)。An Empirical Evaluation of the Impacts of Telecommuting on Intra-organizational Communication。Journal of Engineering and Technology Management，16(1)，1-28。  new window
52.Ettlie, J. E.、Trygg, L. D.(1995)。Design-Manufacturing Practice in the US and Sweden。IEEE Transactions on Engineering Management，42(1)，74-81。  new window
53.Gerwin, D.、Susman, G.(1996)。Special Issue on Concurrent Engineering。IEEE Transactions on Engineering Management，43(2)，118-123。  new window
54.Ginn, M. E.、Rubenstein, A. H.(1986)。The R&D/ Production Interface: A Case Study of New Product Commercialization。Journal of Product Innovation Management，3(3)，158-170。  new window
55.Aiken, M.、Marett, C. B.、Hage, J.(1971)。Organization Structure and Communication。American Sociological Review，36，860-871。  new window
56.Kahn, K. B.(1996)。A Definition of Interdepartmental Integration with Implications for Product Development Performance。Journal of Product Innovation Management，13(2)，137-151。  new window
57.Kusunoki, K.、Numagmi, T.(1998)。Inter-functional Transfer of Engineers in Japan: Empirical Findings and Implications for Cross-Functional Integration。IEEE Transactions on Engineering Management，45(3)，250-262。  new window
58.Moenaert, R. K.、Souder, W. E.(1990)。An Information Transfer Model for Integrating Marketing and R&D Personnel in New Product Development Projects。Journal of Product Innovation Management，7(1)，91-107。  new window
59.Gupta, A. V.、Mukhopadhyay, S. K.(1998)。Interfaces for Solving Marketing, Manufacturing and Design Conflicts: A Conceptual Framework。European Journal of Marketing，32(1/2)，101-124。  new window
60.Pinto, M. B.、Pinto, J. K.、Prescott, J. E.(1993)。Antecedents and Consequences of Project Team Cross-function Cooperation。Management Science，39(10)，1281-1297。  new window
61.Pawar, K. S.、Riedel, Johann C. K. H.(1997)。The Consideration of Production Aspects during Product Design Stages。Integrated Manufacturing Systems，8(4)，208-214。  new window
62.Tjosvold, D.(1981)。Unequal Power Relationships with a Cooperative of Competitive Context。Journal of Applied Social Psychology，11(2)，137-150。  new window
63.Tjosvold, D.、Meredith, L.、Wong, C. L.(1998)。Coordination to Market Technology: The Contribution of Cooperative Goals and Interaction。Journal of High Technology Management Research，9(1)，1-15。  new window
學位論文
1.王俊仁(1993)。新產品發展過程中應用同步工程與循序工程之比較(碩士論文)。國立中興大學。  延伸查詢new window
2.林明杰(1988)。研究發展與製造之介面研究(碩士論文)。國立政治大學。  延伸查詢new window
3.陳嵩(1999)。製造部門策略角色定位及其對經營績效影響之研究--資訊硬體產業之實證(博士論文)。國立成功大學。new window  延伸查詢new window
圖書
1.Hammer, Michael、Champy, James(1993)。Reengineering the Corporation: A Manifesto for Business Revolution。London：Nicholas Brealey Publishing Limited。  new window
2.Clark, Kim B.、Wheelwright, Steven C.(1993)。Managing New Product and Process Development: Text and Cases。New York, NY：The Free Press。  new window
3.Daft, R. L.(1995)。Organization theory and design。Minneapolis：West Publishing Company。  new window
4.彭文賢(1996)。組織結構。台北：三民。  延伸查詢new window
5.Hair, Joseph F. Jr.、Anderson, Rolph E.、Tatham, Ronald L.、Black, William C.(1995)。Multivariate Data Analysis: with Readings。Prentice Hall。  new window
6.賴士葆(1995)。生產作業管理--理論與實務。臺北：華泰書局。  延伸查詢new window
7.Cooper, R.(1993)。Winning at New Products: Accelerating the Process from Idea to Launch。Winning at New Products: Accelerating the Process from Idea to Launch。MA。  new window
8.Neilsen, Eric H.(1972)。Understanding and Managing Conflict。Managing Group and Inter-group Relations。Homewood, IL。  new window
9.Sherif, M.(1962)。Inter-group Relations and Leadership: Introductory Statement。Inter-group Relations and Leadership。New York, NY。  new window
 
 
 
 
第一頁 上一頁 下一頁 最後一頁 top
:::
無相關著作
 
無相關點閱
 
QR Code
QRCODE

臺灣人文及社會科學引文索引資料庫

目前上線人數：768（臺灣：763，外國：5） ／ 本年度總使用人次：2096089 ／ 訪客人次（自102年09月）：67890870
國家圖書館著作權聲明 Copyright © 2013 All rights reserved.
本館地址: 100201臺北市中山南路20號． 本館地圖及交通資訊．
總機：(02)23619132．最佳瀏覽解析度為1024x768以上