:::

詳目顯示

回上一頁
題名:供應商管理對採購風險、技術能力與績效之影響
書刊名:風險管理學報
作者:李正文 引用關係林麗蘭
作者(外文):Lee, Cheng-wenLin, Li-lan
出版日期:2006
卷期:8:3
頁次:頁263-291
主題關鍵詞:供應商管理採購風險技術能力Supplier managementPurchasing riskTechnological capacity
原始連結:連回原系統網址new window
相關次數:
  • 被引用次數被引用次數:期刊(1) 博士論文(0) 專書(0) 專書論文(0)
  • 排除自我引用排除自我引用:1
  • 共同引用共同引用:45
  • 點閱點閱:34
隨著JIT採購、供應商管理、快速回應等的發展,以及企業的競爭環境日益激烈,供應鏈中最頻繁且重要的環節莫過於採購活動。企業除了成本競爭優勢考量外,必須有效地運用供應商管理來降低採購風險,以及提升技術能力與績效。本研究是以國內製造業中之電腦週邊設備類、半導體及通信器材類之廠商為探討對象,採用問卷調查方式,共發出300 份問卷,有效回收問卷97 份(有效回收率為32.3%)。首先,進行敘述性統計和信度及效度分析,接著利用因素分析縮短原始資料的構面,萃取出觀察變數項,最後以線性結構模式來驗證11項研究假說與模型配適度,探討行為基礎管理、緩衝導向管理、資訊科技管理對採購風險、技術能力與績效的影響。研究結果發現H4和H5不成立,行為基礎管理或緩衝導向管理雖可降低採購風險,影響績效,但卻無法提升技術能力。藉由本研究的實證結果,瞭解到供應商管理機制的建立,對於企業在採購過程中的風險管理和技術能力,以及績效均有重要的影響。
Owing to the emergence of JIT program and supplier management, and more competitive environment, “purchasing” activity is the most important part within a supply chain. Effective supplier management can reduce purchasing risk and increase technological capacity and performance. A survey was conducted to electronics firms, information technology firms and semiconductor located in Taiwan. This research adopts factor analysis and structural equation model to verify the research framework and 11 hypotheses using the data collected from 97 companies. Consequently, Hypotheses 4 and 5 are not supported. The results of this research reveal that behavior-based management and buffer-oriented management significantly influence purchasing risk and performance, but there are unrelated with technological capacity. This study attempts to provide some managerial suggestions for purchasing decision-makers in supplier management.
期刊論文
1.Krause, D. R.(1999)。The Antecedents of Buying Firms' Efforts to Improve Suppliers。Journal of Operations Management,17,205-224。  new window
2.Zhao, L.、Aram, J. D.(1995)。Networking and Growth of Young Technology-Intensive Ventures in China。Journal of Business Venturing,10(5),349-370。  new window
3.Narasimhan, R.、Das, A.(1999)。An empirical investigation of the contribution of strategic sourcing to manufacturing flexibilities and performance。Decision Sciences,30(3),683-718。  new window
4.Bowersox, D. J.、Closs, D. J.、Stank, T. P.(2000)。Ten Mega-Trends That Will Revolutionize Supply Chain Logistics。Journal of Business Logistics,21(2),1-16。  new window
5.Rigdon, E. E.(1996)。CFI Versus RMSEA: A Comparison of Two Fit Indexes for Structural Equation Modeling。Structural Equation Modeling,3(4),369-379。  new window
6.Fisher, M. L.、Hammond, J. H.、Obermeyer, W. R.、Raman, A.(1994)。Making supply meet demand in an uncertain world。Harvard Business Review,72(3),83-93。  new window
7.Wong, J. K.(1995)。Technology transfer in Thailand: Descriptive validation of a technology transfer model。International Journal of Technology Management,10(7/8),788-796。  new window
8.中內基博(2002)。研究開発組織における技術知識の獲得とパフォーマンスん関係性:吸収能力と外部アクセスおよび技術の多角化の観点から。産業経営,30。  延伸查詢new window
9.SAP(20030600)。拉近企業夥伴間的距離--供應商關係管理的實質意涵。電子化企業經理人報告,46,56-57。  延伸查詢new window
10.Baranson, J.(1987)。Technical Transfer: Example from Pakistan。Multinational Business,4(2),18-26。  new window
11.Bhaskar, A.、Johnson, K. L.、Wood, G. D.、Woodhouse, J.(1997)。Wheel-Rail Dynamics with Closely Conformal Contact。Journal of Rail and Rapid Transit,211(1),11-26。  new window
12.Bozarth, C.、Handfield, R.、Das, A.(1998)。Stages of Global Sourcing Strategy Evolution: An Exploratory Study。Journal of Operations Management,16,241-255。  new window
13.Carr, A. S.、Pearson, J. N.(1999)。Strategically Managed Buyer-Suppler Relationships and Performance Outcomes。Journal of Operations Management,17(5),497-519。  new window
14.Choi, T. Y.、Liker, J. K.(1995)。Bringing Japanese Continuous Improvement Approaches to U. S. Manufacturing: The Roles of Process Orientation and Communications。Decision Sciences,26(5),589-620。  new window
15.Ellram, L. M.(1999)。The Use of the Case Study Method in Logistics Research。Journal of Business Logistics,17(2),93-134。  new window
16.Emiliani, M. L.(2000)。Business-to-Business on Line Actions: Key Issue for Purchasing Process Improvement。Journal of Supply Chain Management,5(4),176-186。  new window
17.Ghodsypour, S. H.、Brien, C. O.(2001)。The Total Cost of Logistics in Supplier Selection under Conditions of Multiple Sourcing, Multiple Criteria and Capacity Constraint。International Journal of Production Economics,73,15-27。  new window
18.Granstrand, O.(1998)。Towards a Theory of the Technology-Based Firm。Research Policy,27(6),465-489。  new window
19.Grout, J. R.(1998)。Influencing a Supplier Using Delivery Windows: Its Effect on the Variance of Flow Time and On-Time Delivery。Decision Science,29(3),747-764。  new window
20.Kelle, P.、Miller, P. A.(2001)。Stockout Risk and Order Splitting。International Journal of Production Economics,71,407-415。  new window
21.Larson, P. D.、Kulchitsky, J. D.(1998)。Single Sourcing and Supplier Certification。Industrial Marketing Management,27(1),73-81。  new window
22.Lockhart, M.、Ettkin, L.(1993)。Vendor Certification: Seven Steps to a Better Product。Production and Inventory Management Journal,34(1),65-69。  new window
23.Magretta, K.(1998)。The Power of Virtual Integration: An Interview with Dell Computer'sMichael Dell。Harvard Business Review,76(2),73-82。  new window
24.Maloni, M. J.、Benton, W. C.(1997)。Supply Chain Partnership: Opportunities Research。European Journal of Operational Research,101(3),419-429。  new window
25.Mowbray, C. T.、Solomon, M.、Ribisl, K. M.(1995)。Treatment for Mental Illness and Substance Abuse in a Public Psychiatric Hospital: Successful Strategies and Challenging Problems。Journal of Substance Abuse Treatment,12(2),129-139。  new window
26.Mitchell, V. W.(1995)。Organizational Risk Perception and Reduction: A Literature Review。British Journal of Management,6(2),115-133。  new window
27.Newman, R. G.(1989)。The Buyer-Supplier Relationship under Just in Time。Production and Inventory Management Journal,30(1),49-52。  new window
28.Newman, R. G.、Mckeller, S. M.(1995)。Target Costing: A Challenge for Purchasing。International Journal of Purchasing and Material Management,31(3),13-20。  new window
29.Newman, R. G.、Rhee, K.。A Case Study of NUMMI and Its Suppliers。International Journal of Purchasing and Materials Managements,26(4),15-20。  new window
30.Poirier, J. P.(1988)。Transport Properties of Liquid Metals and Viscosity of the Earth's Core。Geophysical Journal,92,99-105。  new window
31.Thomas, D.、Hackman, S.(2003)。A Committed Delivery Strategy with Fixed Frequency and Quantity。European Journal of Operational Research,148(2),363-373。  new window
32.Tullous R.、Utecht, R.(1992)。Multiple or Single Sourcing?。The Journal of Business and Industrial Marketings,7(4),93-113。  new window
33.Watts C. A.、Hahn, C. K.(1993)。Supplier Development Programs: An Empirical Analysis。Journal of Purchasing and Materials Management,24(2),10-17。  new window
34.Zsidisin, G. A.、Ellram, L. M.(2003)。An Agency Theory Investigation on Supply Risk Management。Journal of Supply Chain Management,39(3),15-27。  new window
35.Zsidisin, G. A.、Panelli, A.、Upton, R.(2000)。Purchasing Organization Involvement in Risk Assessment, Contingency Plans, and Risk Management: An Exploratory Study。Supply Chain Management: Art International Journal,5(4),187-197。  new window
36.Stuart, F. I.(1993)。Supplier partnerships: Influencing factors and strategic benefits。International Journal of Purchasing and Materials Management,29(3),21-29。  new window
37.Quinn, James Brian、Hilmer, Frederick G.(1994)。Strategic outsourcing。Sloan Management Review,35(4),43-55。  new window
38.Shin, H.、Collier, D. A.、Wilson, D. D.(2000)。Supply Management Orientation and Supplier/Buyer Performance。Journal of Operations Management,18(3),317-333。  new window
39.Choi, T. Y.、Hartley, J. L.(1996)。An exploration of supplier selection practices across the supply chain。Journal of Operations Management,14(4),333-343。  new window
40.Hedlund, Gunnar(1994)。A model of Knowledge Management and the N-Form Corporation。Strategic Management Journal,15(Special Issue),73-90。  new window
41.Roselius, Ted(1971)。Consumer Rankings of Risk Reduction Methods。Journal of Marketing,35(1),56-61。  new window
42.Anupindi, R.、Akella, R.(1993)。Diversification under Supply Uncertainty。Management Science,39(8),944-963。  new window
43.林清山(19840100)。「線性結構關係」(LISREL)電腦程式的理論與應用。測驗年刊,31,149-163。new window  延伸查詢new window
44.Lee, H. L.、Billington, C.(1993)。Material Management in Decentralized Supply Chains。Operations Research,41(5),835-847。  new window
45.Kanter, R. M.(1994)。Collaborative advantage: The art of alliances。Harvard Business Review,72(4),96-104。  new window
46.Ding, Lin、Velicer, Wayne F.、Harlow, Lisa L.(1995)。Effects of estimation methods, number of indicators per factor, and improper solutions on structural equation modeling fit indices。Structural Equation Modeling: A Multidisciplinary Journal,2(2),119-143。  new window
47.Prahalad, Coimbatore K.、Hamel, Gary(1990)。The core competence of the corporation。Harvard Business Review,68(3),79-91。  new window
48.Anderson, James C.、Gerbing, David W.(1988)。Structural Equation Modeling in Practice: A Review and Recommended Two-Step Approach。Psychological Bulletin,103(3),411-423。  new window
49.Sheth, Jagdish N.(1973)。A Model of Industrial Buyer Behavior。Journal of Marketing,37(4),50-56。  new window
50.Brown, Ann L.(1992)。Design Experiments: Theoretical and Methodological Challenges in Creating Complex Interventions in Classroom Settings。Journal of the Learning Sciences,2(2),141-178。  new window
51.Bagozzi, Richard P.、Yi, Youjae(1988)。On the Evaluation of Structural Equation Models。Journal of the Academy of Marketing Science,16(1),74-94。  new window
52.Venkatraman, N.、Ramanujam, Vasudevan(1986)。Measurement of Business Performance in Strategy Research: A Comparison of Approaches。Academy of Management Review,11(4),801-814。  new window
學位論文
1.黃建勝(2004)。製造商之採購管理行為對採購風險及生產績效之影響(碩士論文)。銘傳大學。  延伸查詢new window
2.Mills, K.(1996)。Automated Generation of Concurrent Designs For Real-Time Software(博士論文)。George Mason University。  new window
圖書
1.Christopher, M.(1998)。Logistics and Supply Chain Management: Strategies for Reducing Cost and Improving Service。London:Financial Times Prentice Hall。  new window
2.Domier, Philippe-Pierre、Ernst, R.、Fender, M.、Kouvellis, P.(1998)。Global Operations and Logistics: Text and Cases。New York:John Wiley and Son。  new window
3.杜拉克、劉毓玲(2005)。21世紀的管理挑戰。天下遠見。  延伸查詢new window
4.王忠宗(2000)。採購管理。臺北:日正企管顧問出版社。  延伸查詢new window
5.許振邦(2004)。採購與供應管理。台北:智勝文化。  延伸查詢new window
6.Crane, F. G.(1980)。Insurance Principles and Practices。New York, NY:John Wiley and Sons。  new window
7.Joseph, F.、Hair, J. R. Jr.(1998)。Multivariate Date Analysis。Prentice-Hall。  new window
8.Leenders, M. R.、Fearon, R. E.(2002)。Purchasing and Supply Management。Homewood, IL:Irwin。  new window
9.Miller, J. G.、Meyer, A. D.、Nakane, J.(1992)。Benchmarking Global Manufacturing-Understanding International Suppliers, Customers, and Competitors。Irwin。  new window
10.Peters, T.(1992)。Liberation Management。New York:Fawcett Columbine。  new window
11.Roberts, T. J.(1977)。The Mammals of Pakistan。London:Ernest Benn。  new window
12.Rosenbloom, R. S.、Burgelman, R. A.(1989)。Research on Technological Innovation, Management and Policy。Greenwich, CT:JAI Press。  new window
13.Valla, L.(1982)。Repastinatio Dialectice et Philosophic。Padova:Antenore。  new window
14.William, N. R.、Connie, W. V.(1999)。The Manager's Dilemma。Computer-Aided Engineering。  new window
15.Jöreskog, K. G.、Sörbom, D.(1993)。LISREL 8: Structural Equation Modeling with SIMPLIS Command Language。Scientific Software International Inc.。  new window
16.Rosenbloom, J. S.(1972)。A case study in risk management。New York:Meredith Corp.。  new window
17.Porter, Michael E.(1985)。Competitive Advantage: Creating and Sustaining Superior Performance。New York, NY:Schuster Inc.。  new window
18.Williams, C. A.、Heins, R. M.(1981)。Risk management and insurance。New York:McGraw Hill。  new window
19.張劭勳(2001)。研究方法。台中:滄海書局。  延伸查詢new window
20.許士軍(1990)。管理學。台北:東華書局。  延伸查詢new window
21.黃俊英(2000)。多變量分析。台北:中國經濟企業研究所。  延伸查詢new window
22.陳順宇(2000)。多變量分析。臺北:華泰書局。  延伸查詢new window
23.Bowersox, Donald J.、Closs, David J.(1996)。Logistical Management: The Integrated Supply Chain Process。McGraw-Hill。  new window
24.王立志(1999)。系統化運籌與供應鏈管理。滄海。  延伸查詢new window
25.邱皓政(2003)。結構方程模式--LISREL的理論、技術與應用。雙葉書廊。  延伸查詢new window
其他
1.中華徵信(2005)。台灣地區大型企業排名TOP5000,http://www.credit.com.tw/newweb/inde_all.htm。  延伸查詢new window
圖書論文
1.Bechtel, W.(1997)。Embodied Connectionism。The Future of the Cognitive Revolution。Oxford:Oxford University Press。  new window
 
 
 
 
第一頁 上一頁 下一頁 最後一頁 top
:::
無相關著作
 
QR Code
QRCODE